[Fri Aug 17 08:17:10 2012] Detection parameters:
  Position = (121.0, 294.9) = 18 33 40.16 -10 34 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.3 +/- 14.3
  Background counts = 31.0
  Rate = 0.002 +/- 0.0005

[Fri Aug 17 08:17:10 2012] Off-axis axis estimate = 12.87'
[Fri Aug 17 09:20:16 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 09:20:16 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Fri Aug 17 09:20:16 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.879
[Fri Aug 17 09:20:16 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.86"
[Fri Aug 17 10:10:45 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src17.ximg exists
[Fri Aug 17 10:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src17.csv
[Fri Aug 17 10:10:45 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Aug 17 10:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src17.csv
[Fri Aug 17 10:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 10:10:46 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Aug 17 10:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Aug 17 10:10:46 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Aug 17 10:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Aug 17 10:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:30:26 2012] Spatial fit model total counts = 579.332000, observed total counts = 681.000000
[Fri Aug 17 11:30:26 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 11:30:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:30:27 2012] Assessing source extent using major
[Fri Aug 17 11:30:27 2012] Source does appear to be extended
[Fri Aug 17 11:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:37:51 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:37:51 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Fri Aug 17 12:37:51 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.879
[Fri Aug 17 12:37:51 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.86"
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src17.ximg exists
[Fri Aug 17 14:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src17.csv
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Aug 17 14:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src17.csv
[Fri Aug 17 14:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Aug 17 14:33:25 2012] Fit fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Aug 17 15:47:01 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 49.043715 pixels away
[Fri Aug 17 15:47:01 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.801676 pixels away
[Fri Aug 17 15:47:01 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 15:47:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 15:47:01 2012] Assessing source extent using major
[Fri Aug 17 15:47:01 2012] Source does appear to be extended
[Fri Aug 17 15:47:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:50:10 2012] XMMSAS src. selection expression = ellipse(10476.542580, 25611.245697, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 16:50:10 2012] Writing source region out to fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src10_src.reg
[Fri Aug 17 16:50:10 2012] Extracting stamp from image fullrun_mos1_xmm0122700301_pi300-10000_cl_sm2.00.img.gz, (83, 257) - (158, 332)
[Fri Aug 17 16:50:10 2012] XMMSAS bgd. selection expression = annulus(10476.542580, 25611.245697, 1087.500000, 2175.000000, X, Y) && !ellipse(12380.439000, 26284.006600, 3436.608099, 3436.608099, 0.000000, X, Y) && !ellipse(12877.254000, 28204.838000, 1821.064052, 1821.064052, 153.523000, X, Y) && !ellipse(13171.755081, 27441.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12165.063553, 24484.950409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12600.384811, 24528.800873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10699.104000, 28269.780000, 2016.488058, 2016.488058, 0.000000, X, Y) && !ellipse(10998.772000, 24230.890000, 1251.752036, 1251.752036, 0.000000, X, Y) && !ellipse(13874.580000, 28030.682000, 1884.224054, 1884.224054, 0.000000, X, Y) && !ellipse(11538.962509, 25191.910370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10424.764000, 27578.150000, 1870.088054, 1870.088054, 0.000000, X, Y)
[Fri Aug 17 16:50:10 2012] Writing fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src10.gif
[Fri Aug 17 17:08:12 2012] Mean detx,y = (-525.61, 13962.00) 
[Fri Aug 17 17:08:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 17:08:24 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 17:08:24 2012] Setting source spectrum file to fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Aug 17 17:08:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Aug 17 17:31:54 2012] Not generating rmf since there are only 67 counts
[Fri Aug 17 17:31:54 2012] rmf not generated due to insufficient counts
[Fri Aug 17 18:32:51 2012] Updating aperture counts using extracted products
[Fri Aug 17 18:32:51 2012] Error reading totcts from fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Aug 17 18:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:32:51 2012] Using photon index=1.80, rate=0.00231, arf fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src10.arf
[Fri Aug 17 18:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:32:51 2012] Updating source flux to 4.7e-14
[Fri Aug 17 18:32:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting