[Sun Sep  2 02:04:50 2012] Detection parameters:
  Position = (281.2, 280.0) = 18 33 33.74 -10 34 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89871.7 +/- 354.7
  Background counts = 139.0
  Rate = 4 +/- 0.01

[Sun Sep  2 02:04:50 2012] Off-axis axis estimate = 1.83'
[Sun Sep  2 02:07:13 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 02:07:13 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Sep  2 02:07:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sun Sep  2 02:07:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sun Sep  2 03:57:00 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep  2 03:57:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_src1.csv
[Sun Sep  2 03:57:00 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep  2 03:57:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_src1.csv
[Sun Sep  2 03:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 03:57:00 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep  2 03:57:00 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep  2 03:57:00 2012] Fit fullrun_pn_xmm0122700101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep  2 05:41:31 2012] Spatial fit model total counts = 104493.000000, observed total counts = 104493.000000
[Sun Sep  2 05:41:31 2012] Offset between fit and detection position for source 1 = 0.088562 pixels
[Sun Sep  2 05:41:31 2012] 105129.700000 total counts/ 20797.500000 bgd. counts: snr = 584.773742
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.088562 pixels
  Position = (281.3, 280.1) = 18 33 33.73 -10 34 6.9
  Extent = 12.6 (12.5-12.7)", rotation angle = 0
  Source counts = 84332.2 +/- 324.2
  Background counts = 20797.5
  Rate = 4 +/- 0.01
[Sun Sep  2 05:41:31 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 05:41:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 05:41:31 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 05:41:31 2012] Source does appear to be extended
[Sun Sep  2 05:41:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 05:41:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 05:41:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 05:41:45 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Sun Sep  2 05:41:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Sun Sep  2 05:41:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.59"
[Sun Sep  2 06:38:05 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep  2 06:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_src1.csv
[Sun Sep  2 06:38:05 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep  2 06:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_src1.csv
[Sun Sep  2 06:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 06:38:05 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep  2 06:38:05 2012] fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep  2 06:38:05 2012] Fit fullrun_pn_xmm0122700101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep  2 08:33:09 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Sun Sep  2 08:33:09 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 08:33:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 08:33:09 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 08:33:09 2012] Source does appear to be extended
[Sun Sep  2 08:33:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 08:33:20 2012] Counts = 84332.200000, rescaling region sizes by 3.000000
[Sun Sep  2 08:33:20 2012] XMMSAS src. selection expression = ellipse(24420.698200, 24319.551400, 2265.876065, 2265.876065, 0.000000, X, Y)
[Sun Sep  2 08:33:20 2012] Writing source region out to fullrun_pn_xmm0122700101_pi300-10000_pass1_cl_src1_src.reg
[Sun Sep  2 08:33:20 2012] Extracting stamp from image fullrun_pn_xmm0122700101_pi300-10000_cl_sm2.00.img.gz, (151, 150) - (411, 410)
[Sun Sep  2 08:33:20 2012] XMMSAS bgd. selection expression = annulus(24420.698200, 24319.551400, 11329.380326, 22658.760652, X, Y) && !ellipse(36738.242493, 30388.100067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29708.322440, 29710.785800, 325.493609, 325.493609, 0.000000, X, Y) && !ellipse(23090.070000, 26143.632320, 1199.464035, 1199.464035, 0.000000, X, Y) && !ellipse(25307.985596, 25619.447083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24736.725100, 25946.629800, 775.412822, 775.412822, 0.000000, X, Y) && !ellipse(25981.998000, 22798.702600, 574.298417, 337.488010, 108.558000, X, Y) && !ellipse(24502.335541, 23011.233917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26016.103149, 36309.935822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16255.466736, 31813.829559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34386.720215, 30145.024170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.655426, 25696.387177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26325.886658, 24755.689056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22159.199400, 25291.843000, 1286.712037, 749.641622, 107.837700, X, Y) && !ellipse(29560.068115, 36837.620239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25271.260000, 36412.408000, 1748.088050, 1748.088050, 0.000000, X, Y) && !ellipse(25017.349800, 32193.172400, 2252.656065, 2252.656065, 0.000000, X, Y) && !ellipse(22133.640533, 22929.342194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22690.344421, 23046.986542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.252228, 21968.124680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.036000, 22468.456000, 1205.032035, 415.410412, 91.311230, X, Y) && !ellipse(25222.649800, 38047.701200, 1167.856034, 1167.856034, 0.000000, X, Y) && !ellipse(24948.865000, 33428.928000, 1034.232030, 1034.232030, 0.000000, X, Y) && !ellipse(19592.093826, 31348.105560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.373400, 30307.576000, 1347.784039, 1347.784039, 0.000000, X, Y) && !ellipse(24745.404000, 29414.586800, 1267.792036, 625.692018, 285.293000, X, Y) && !ellipse(24661.904780, 29214.338000, 1228.832035, 1228.832035, 0.000000, X, Y) && !ellipse(25338.980408, 22586.492950, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 08:33:20 2012] Writing fullrun_pn_xmm0122700101_pi300-10000_pass1_cl_src1.gif
[Sun Sep  2 08:33:35 2012] Mean detx,y = (328.36, -133.53) 
[Sun Sep  2 08:33:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 08:42:59 2012] grppha failed
[Sun Sep  2 08:42:59 2012] Setting source spectrum file to fullrun_pn_xmm0122700101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Sep  2 08:42:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0122700101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep  2 09:18:17 2012] Updating aperture counts using extracted products
[Sun Sep  2 09:18:17 2012] Error reading totcts from fullrun_pn_xmm0122700101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Sep  2 09:18:17 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 09:18:21 2012] Source 1 has no response, skipping
[Sun Sep  2 09:18:22 2012] xmm0122700101/analysis//spectral/fullrun_pn_xmm0122700101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete