[Sat Jul 28 18:12:56 2012] Detection parameters:
  Position = (233.5, 263.0) = 3 13 13.65 -76 55 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 470.9 +/- 27.9
  Background counts = 14.9
  Rate = 0.01 +/- 0.0008

[Sat Jul 28 18:12:56 2012] Off-axis axis estimate = 5.36'
[Sat Jul 28 20:05:00 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 20:05:00 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Sat Jul 28 20:05:00 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.669
[Sat Jul 28 20:05:00 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.11"
[Sat Jul 28 20:45:50 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jul 28 20:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src5.csv
[Sat Jul 28 20:45:50 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jul 28 20:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src5.csv
[Sat Jul 28 20:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 20:45:51 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jul 28 20:45:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jul 28 20:45:51 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jul 28 20:45:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jul 28 20:45:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 20:46:11 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.244146 pixels away
[Sat Jul 28 20:46:11 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 20:46:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 20:46:11 2012] Assessing source extent using major
[Sat Jul 28 20:46:11 2012] Source does appear to be extended
[Sat Jul 28 20:46:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 22:29:04 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 22:29:04 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Sat Jul 28 22:29:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.669
[Sat Jul 28 22:29:04 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.11"
[Sat Jul 28 23:00:30 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 28 23:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src5.csv
[Sat Jul 28 23:00:30 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 28 23:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src5.csv
[Sat Jul 28 23:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 23:00:30 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 28 23:00:30 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 28 23:00:30 2012] Fit fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jul 28 23:00:48 2012] Spatial fit model total counts = 525.374000, observed total counts = 551.000000
[Sat Jul 28 23:00:48 2012] Offset between fit and detection position for source 2 = 0.754667 pixels
[Sat Jul 28 23:00:48 2012] 524.228000 total counts/ 241.125000 bgd. counts: snr = 18.231540
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.754667 pixels
  Position = (233.2, 263.6) = 3 13 14.12 -76 55 59.4
  Extent = 5.6 (4.1-7.2)", rotation angle = 0
  Source counts = 283.1 +/- 22.9
  Background counts = 241.1
  Rate = 0.008 +/- 0.0006
[Sat Jul 28 23:00:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 23:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 23:00:48 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 23:00:48 2012] Source does appear to be extended
[Sat Jul 28 23:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 01:23:13 2012] XMMSAS src. selection expression = ellipse(20238.311160, 22887.689800, 336.299410, 336.299410, 0.000000, X, Y)
[Sun Jul 29 01:23:13 2012] Writing source region out to fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 29 01:23:13 2012] Extracting stamp from image fullrun_mos2_xmm0122520201_pi300-10000_cl_sm2.00.img.gz, (214, 244) - (253, 283)
[Sun Jul 29 01:23:13 2012] XMMSAS bgd. selection expression = annulus(20238.311160, 22887.689800, 560.499016, 1120.998032, X, Y)
[Sun Jul 29 01:23:13 2012] Writing fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src2.gif
[Sun Jul 29 01:26:16 2012] Mean detx,y = (6926.46, 1297.52) 
[Sun Jul 29 01:26:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 01:26:31 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 01:26:31 2012] Setting source spectrum file to fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 01:26:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 29 01:47:57 2012] Updating aperture counts using extracted products
[Sun Jul 29 01:47:57 2012] Error reading totcts from fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 01:47:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 01:47:57 2012] Using photon index=1.80, rate=0.00778, arf fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src2.arf
[Sun Jul 29 01:47:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 01:47:57 2012] Updating source flux to 2.5e-13