[Sat Jul 28 18:12:56 2012] Detection parameters:
  Position = (295.3, 319.8) = 3 11 54.39 -76 51 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10525.5 +/- 122.7
  Background counts = 18.7
  Rate = 0.4 +/- 0.004

[Sat Jul 28 18:12:56 2012] Off-axis axis estimate = 1.57'
[Sat Jul 28 20:05:00 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 20:05:00 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Sat Jul 28 20:05:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.698
[Sat Jul 28 20:05:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Sat Jul 28 20:45:50 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 20:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 20:45:50 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 20:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 20:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 20:45:50 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 20:45:50 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 20:45:50 2012] Fit fullrun_mos2_xmm0122520201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 20:46:11 2012] Spatial fit model total counts = 9443.660000, observed total counts = 9648.000000
[Sat Jul 28 20:46:11 2012] Offset between fit and detection position for source 1 = 1.230714 pixels
[Sat Jul 28 20:46:11 2012] 9420.410000 total counts/ 2015.780000 bgd. counts: snr = 164.923217
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.230714 pixels
  Position = (295.1, 321.1) = 3 11 54.68 -76 51 50.5
  Extent = 6.6 (6.4-6.7)", rotation angle = 0
  Source counts = 7404.6 +/- 97.1
  Background counts = 2015.8
  Rate = 0.2 +/- 0.003
[Sat Jul 28 20:46:11 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 20:46:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 20:46:11 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 20:46:11 2012] Source does appear to be extended
[Sat Jul 28 20:46:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 22:29:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 22:29:04 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Sat Jul 28 22:29:04 2012] source mask rpix=1.5, npix_max = 16, mask sum = 11, frac = 0.682
[Sat Jul 28 22:29:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.56"
[Sat Jul 28 23:00:29 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 23:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 23:00:29 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 23:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 23:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 23:00:30 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 23:00:30 2012] fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 23:00:30 2012] Fit fullrun_mos2_xmm0122520201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 23:00:48 2012] Spatial fit model total counts = 9406.130000, observed total counts = 9619.000000
[Sat Jul 28 23:00:48 2012] Offset between fit and detection position for source 1 = 0.008751 pixels
[Sat Jul 28 23:00:48 2012] 9364.400000 total counts/ 1995.270000 bgd. counts: snr = 164.973953
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008751 pixels
  Position = (295.1, 321.1) = 3 11 54.68 -76 51 50.5
  Extent = 6.5 (6.4-6.7)", rotation angle = 0
  Source counts = 7369.1 +/- 96.8
  Background counts = 1995.3
  Rate = 0.2 +/- 0.003
[Sat Jul 28 23:00:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 23:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 23:00:48 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 23:00:48 2012] Source does appear to be extended
[Sat Jul 28 23:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 01:23:13 2012] Counts = 7369.130000, rescaling region sizes by 2.000000
[Sun Jul 29 01:23:13 2012] XMMSAS src. selection expression = ellipse(25625.189960, 27884.091400, 780.622822, 780.622822, 0.000000, X, Y)
[Sun Jul 29 01:23:13 2012] Writing source region out to fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 29 01:23:13 2012] Extracting stamp from image fullrun_mos2_xmm0122520201_pi300-10000_cl_sm2.00.img.gz, (250, 276) - (340, 366)
[Sun Jul 29 01:23:13 2012] XMMSAS bgd. selection expression = annulus(25625.189960, 27884.091400, 2602.076075, 5204.152150, X, Y) && !ellipse(24695.401306, 27444.575287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20414.730720, 24693.304200, 361.231210, 361.231210, 0.000000, X, Y) && !ellipse(20238.311160, 22887.689800, 448.399213, 448.399213, 0.000000, X, Y) && !ellipse(21641.469788, 25011.392273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22608.314000, 28282.344600, 474.336814, 474.336814, 0.000000, X, Y) && !ellipse(30083.447000, 26184.774400, 337.143210, 337.143210, 0.000000, X, Y) && !ellipse(21450.202880, 29346.219800, 405.036812, 405.036812, 0.000000, X, Y)
[Sun Jul 29 01:23:13 2012] Writing fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 29 01:23:16 2012] Mean detx,y = (-233.61, -268.33) 
[Sun Jul 29 01:23:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 01:23:36 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 01:23:36 2012] Setting source spectrum file to fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 01:23:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 29 01:47:57 2012] Updating aperture counts using extracted products
[Sun Jul 29 01:47:57 2012] Error reading totcts from fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 01:47:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 01:47:57 2012] Using photon index=1.80, rate=0.203, arf fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 01:47:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 01:47:57 2012] Updating source flux to 3e-12
[Sun Jul 29 01:48:59 2012] Reading fit data from xmm0122520201/analysis//spectral/fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 29 01:48:59 2012] Spectral fit parameter nH value = 1.27518e+20
[Sun Jul 29 01:48:59 2012] Spectral fit parameter PhoIndex value = 1.9076
[Sun Jul 29 01:48:59 2012] Failed to get F(0.3-8.0) from xmm0122520201/analysis//spectral/fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 01:48:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 01:48:59 2012] Using Nh = 1.3e+20, photon index=1.91, rate=0.203, arf fullrun_mos2_xmm0122520201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 01:48:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 01:48:59 2012] Updating source flux to 2.9e-12