[Sun Jul 29 03:30:38 2012] Detection parameters:
  Position = (280.9, 129.0) = 18 14 31.89 -17 20 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 11.7
  Background counts = 7.5
  Rate = 0.01 +/- 0.003

[Sun Jul 29 03:30:38 2012] Off-axis axis estimate = 12.35'
[Mon Jul 30 00:53:48 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 00:53:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 30 00:53:48 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Mon Jul 30 00:53:48 2012] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.845
[Mon Jul 30 00:53:48 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.60"
[Mon Jul 30 01:28:18 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul 30 01:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 01:28:18 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul 30 01:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 01:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:28:18 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul 30 01:28:18 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul 30 01:28:18 2012] Fit fullrun_mos2_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul 30 01:28:26 2012] Spatial fit model total counts = 219.356000, observed total counts = 207.000000
[Mon Jul 30 01:28:26 2012] Offset between fit and detection position for source 1 = 0.878425 pixels
[Mon Jul 30 01:28:26 2012] 171.195500 total counts/ 122.861000 bgd. counts: snr = 4.360640
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.878425 pixels
  Position = (280.4, 128.3) = 18 14 32.02 -17 20 23.4
  Extent = 9.7 (6.8-14.8)", rotation angle = 0
  Source counts = 48.3 +/- 13.1
  Background counts = 122.9
  Rate = 0.01 +/- 0.003
[Mon Jul 30 01:28:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:28:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:28:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:28:26 2012] Source does appear to be extended
[Mon Jul 30 01:28:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:28:26 2012] Source is confused with source 9
[Mon Jul 30 05:23:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 30 05:23:51 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Mon Jul 30 05:23:51 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.736
[Mon Jul 30 05:23:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.72"
[Mon Jul 30 05:47:07 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 30 05:47:07 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 30 05:47:07 2012] Fit fullrun_mos2_xmm0122341001_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Jul 30 05:47:07 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 30 05:47:07 2012] fullrun_mos2_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 30 05:47:07 2012] Fit fullrun_mos2_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 30 05:47:13 2012] Warning, spatial fit 3 centroid is now closest to src. 9
[Mon Jul 30 05:47:13 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 05:47:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 05:47:13 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 05:47:13 2012] Source does appear to be extended
[Mon Jul 30 05:47:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 17:00:46 2012] XMMSAS src. selection expression = ellipse(24348.109520, 11109.291400, 583.192817, 583.192817, 0.000000, X, Y)
[Mon Jul 30 17:00:46 2012] Writing source region out to fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 30 17:00:46 2012] Extracting stamp from image fullrun_mos2_xmm0122341001_pi300-10000_cl_sm2.00.img.gz, (247, 95) - (314, 162)
[Mon Jul 30 17:00:46 2012] XMMSAS bgd. selection expression = annulus(24348.109520, 11109.291400, 971.988028, 1943.976056, X, Y) && !ellipse(24389.443695, 12140.760742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24200.201400, 8992.669200, 440.711213, 440.711213, 0.000000, X, Y) && !ellipse(24334.252800, 11003.158000, 942.928027, 942.928027, 0.000000, X, Y) && !ellipse(24196.369965, 9691.351517, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 17:00:46 2012] Writing fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1.gif
[Mon Jul 30 17:01:20 2012] Mean detx,y = (-53.03, 13240.53) 
[Mon Jul 30 17:01:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 17:01:38 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 17:01:39 2012] Setting source spectrum file to fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 30 17:01:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 30 17:04:38 2012] Not generating rmf since there are only 48 counts
[Mon Jul 30 17:04:38 2012] rmf not generated due to insufficient counts
[Mon Jul 30 17:06:48 2012] Updating aperture counts using extracted products
[Mon Jul 30 17:06:48 2012] Error reading totcts from fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 30 17:06:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 17:06:49 2012] Using photon index=1.80, rate=0.0108, arf fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1.arf
[Mon Jul 30 17:06:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 17:06:49 2012] Updating source flux to 3.9e-13
[Mon Jul 30 17:12:28 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul 30 17:12:28 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul 30 17:12:29 2012] xmm0122341001/analysis//spectral/fullrun_mos2_xmm0122341001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete