[Sun Jul 29 03:30:19 2012] Detection parameters:
  Position = (286.1, 284.0) = 18 14 30.31 -17 9 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27306.7 +/- 207.9
  Background counts = 474.7
  Rate = 6 +/- 0.05

[Sun Jul 29 03:30:20 2012] Off-axis axis estimate = 1.38'
[Sun Jul 29 03:31:42 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 03:31:42 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sun Jul 29 03:31:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.876
[Sun Jul 29 03:31:42 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.12"
[Mon Jul 30 00:53:47 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul 30 00:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 00:53:47 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul 30 00:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 00:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 00:53:47 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul 30 00:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jul 30 00:53:47 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul 30 00:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jul 30 00:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:28:24 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Mon Jul 30 01:28:24 2012] Spatial fit model total counts = 82682.400000, observed total counts = 88736.000000
[Mon Jul 30 01:28:24 2012] Offset between fit and detection position for source 3 = 2.421707 pixels
[Mon Jul 30 01:28:24 2012] Warning, changing simple spatial fit ID from 3 to 8
[Mon Jul 30 01:28:24 2012] 72693.000000 total counts/ 25600.000000 bgd. counts: snr = 294.331250
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.421707 pixels
  Position = (284.1, 285.4) = 18 14 30.91 -17 8 59.9
  Extent = 14.4 (14.4-28.9)", rotation angle = 0
  Source counts = 47093.0 +/- 269.6
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.06
[Mon Jul 30 01:28:24 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:28:24 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:28:24 2012] Source does appear to be extended
[Mon Jul 30 01:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:28:24 2012] Source is confused with source 1
[Mon Jul 30 01:28:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 30 01:28:31 2012] Initial guess for spatial extent in simple fitting = 14.44"
[Mon Jul 30 01:28:31 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.960
[Mon Jul 30 01:28:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.44"
[Mon Jul 30 05:23:50 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 30 05:23:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src3.csv
[Mon Jul 30 05:23:50 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 30 05:23:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src3.csv
[Mon Jul 30 05:23:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 05:23:50 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 30 05:23:50 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 30 05:23:50 2012] Fit fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 30 05:47:11 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Mon Jul 30 05:47:11 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 05:47:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 05:47:11 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 05:47:11 2012] Source does appear to be extended
[Mon Jul 30 05:47:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 05:47:18 2012] Counts = 47093.000000, rescaling region sizes by 3.000000
[Mon Jul 30 05:47:18 2012] XMMSAS src. selection expression = ellipse(24665.854000, 24780.279800, 2598.354075, 2598.354075, 0.000000, X, Y)
[Mon Jul 30 05:47:18 2012] Writing source region out to fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul 30 05:47:18 2012] Extracting stamp from image fullrun_mos1_xmm0122341001_pi300-10000_cl_sm2.00.img.gz, (135, 136) - (433, 435)
[Mon Jul 30 05:47:18 2012] XMMSAS bgd. selection expression = annulus(24665.854000, 24780.279800, 12991.770374, 25983.540748, X, Y) && !ellipse(25303.966000, 24253.802800, 3482.832100, 3482.832100, 0.000000, X, Y) && !ellipse(24534.765800, 23850.241000, 7173.552206, 7173.552206, 0.000000, X, Y) && !ellipse(24228.177216, 22361.688965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25626.206000, 22344.042000, 1923.792055, 611.980018, 1.386370, X, Y) && !ellipse(25951.048000, 21852.308000, 1264.608036, 1264.608036, 0.000000, X, Y) && !ellipse(24907.631073, 22401.378998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24650.095280, 24453.122000, 6928.944199, 6928.944199, 0.000000, X, Y) && !ellipse(24599.270660, 27249.050964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25863.916000, 26205.200000, 1027.256300, 1027.256300, 0.000000, X, Y) && !ellipse(23368.536000, 26255.754000, 1245.248036, 1245.248036, 0.000000, X, Y) && !ellipse(27493.314000, 24305.121800, 1214.072035, 1214.072035, 0.000000, X, Y) && !ellipse(28799.872000, 24223.178200, 1239.432036, 1239.432036, 0.000000, X, Y) && !ellipse(29912.757000, 24215.460920, 1329.816038, 1329.816038, 0.000000, X, Y) && !ellipse(34717.682892, 27867.330292, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 05:47:18 2012] Writing fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src3.gif
[Mon Jul 30 05:58:43 2012] Mean detx,y = (142.75, -66.51) 
[Mon Jul 30 05:58:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 06:10:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 06:10:11 2012] Setting source spectrum file to fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 30 06:10:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul 30 17:06:46 2012] Updating aperture counts using extracted products
[Mon Jul 30 17:06:46 2012] Error reading totcts from fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 30 17:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 17:06:47 2012] Using photon index=1.80, rate=10.3, arf fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src3.arf
[Mon Jul 30 17:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 17:06:47 2012] Updating source flux to 8.8e-11
[Mon Jul 30 17:06:50 2012] Flag c found in src. 3 procflags, skipping spectral fitting