[Sun Jul 29 03:30:20 2012] Detection parameters:
  Position = (346.6, 278.7) = 18 14 11.92 -17 9 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.8 +/- 19.0
  Background counts = 73.5
  Rate = 0.04 +/- 0.005

[Sun Jul 29 03:30:20 2012] Off-axis axis estimate = 3.78'
[Sun Jul 29 03:31:42 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 03:31:42 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun Jul 29 03:31:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Sun Jul 29 03:31:42 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.32"
[Mon Jul 30 00:53:47 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jul 30 00:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src21.csv
[Mon Jul 30 00:53:47 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jul 30 00:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src21.csv
[Mon Jul 30 00:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 00:53:48 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jul 30 00:53:48 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jul 30 00:53:48 2012] Fit fullrun_mos1_xmm0122341001_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jul 30 01:28:24 2012] Spatial fit model total counts = 1070.990000, observed total counts = 1071.000000
[Mon Jul 30 01:28:24 2012] Offset between fit and detection position for source 21 = 2.264908 pixels
[Mon Jul 30 01:28:24 2012] 979.693000 total counts/ 563.959000 bgd. counts: snr = 17.506196
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.264908 pixels
  Position = (344.4, 278.9) = 18 14 12.61 -17 9 28.1
  Extent = 16.6 (16.6-16.6)", rotation angle = 0
  Source counts = 415.7 +/- 31.3
  Background counts = 564.0
  Rate = 0.09 +/- 0.007
[Mon Jul 30 01:28:24 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:28:24 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:28:24 2012] Source does appear to be extended
[Mon Jul 30 01:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:28:24 2012] Source is confused with source 20
[Mon Jul 30 01:28:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 30 01:28:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 30 01:28:31 2012] Initial guess for spatial extent in simple fitting = 16.62"
[Mon Jul 30 01:28:31 2012] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.964
[Mon Jul 30 01:28:31 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 16.62"
[Mon Jul 30 05:23:50 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jul 30 05:23:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src15.csv
[Mon Jul 30 05:23:50 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jul 30 05:23:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src15.csv
[Mon Jul 30 05:23:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 05:23:51 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jul 30 05:23:51 2012] fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jul 30 05:23:51 2012] Fit fullrun_mos1_xmm0122341001_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jul 30 05:47:11 2012] Warning, spatial fit 15 centroid is now closest to src. 20
[Mon Jul 30 05:47:11 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 05:47:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 05:47:11 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 05:47:11 2012] Source does appear to be extended
[Mon Jul 30 05:47:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 05:47:18 2012] XMMSAS src. selection expression = ellipse(29912.757000, 24215.460920, 997.362029, 997.362029, 0.000000, X, Y)
[Mon Jul 30 05:47:18 2012] Writing source region out to fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src21_src.reg
[Mon Jul 30 05:47:18 2012] Extracting stamp from image fullrun_mos1_xmm0122341001_pi300-10000_cl_sm2.00.img.gz, (287, 222) - (402, 336)
[Mon Jul 30 05:47:18 2012] XMMSAS bgd. selection expression = annulus(29912.757000, 24215.460920, 1662.270048, 3324.540096, X, Y) && !ellipse(25303.966000, 24253.802800, 3482.832100, 3482.832100, 0.000000, X, Y) && !ellipse(24534.765800, 23850.241000, 7173.552206, 7173.552206, 0.000000, X, Y) && !ellipse(24665.854000, 24780.279800, 3464.472100, 3464.472100, 0.000000, X, Y) && !ellipse(25626.206000, 22344.042000, 1923.792055, 611.980018, 1.386370, X, Y) && !ellipse(25951.048000, 21852.308000, 1264.608036, 1264.608036, 0.000000, X, Y) && !ellipse(24650.095280, 24453.122000, 6928.944199, 6928.944199, 0.000000, X, Y) && !ellipse(25863.916000, 26205.200000, 1027.256300, 1027.256300, 0.000000, X, Y) && !ellipse(27493.314000, 24305.121800, 1214.072035, 1214.072035, 0.000000, X, Y) && !ellipse(28799.872000, 24223.178200, 1239.432036, 1239.432036, 0.000000, X, Y)
[Mon Jul 30 05:47:18 2012] Writing fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src21.gif
[Mon Jul 30 06:16:38 2012] Mean detx,y = (251.31, -5345.24) 
[Mon Jul 30 06:16:39 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 06:16:55 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 06:16:55 2012] Setting source spectrum file to fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jul 30 06:16:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jul 30 17:06:47 2012] Updating aperture counts using extracted products
[Mon Jul 30 17:06:47 2012] Error reading totcts from fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jul 30 17:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 17:06:48 2012] Using photon index=1.80, rate=0.0905, arf fullrun_mos1_xmm0122341001_pi300-10000_pass1_cl_src21.arf
[Mon Jul 30 17:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 17:06:48 2012] Updating source flux to 1.1e-12
[Mon Jul 30 17:06:50 2012] Flag c found in src. 21 procflags, skipping spectral fitting