[Tue May 29 10:51:10 2012] Detection parameters:
  Position = (226.0, 319.0) = 18 14 40.24 -17 6 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.8 +/- 31.0
  Background counts = 356.4
  Rate = 0.01 +/- 0.001

[Tue May 29 10:51:13 2012] Off-axis axis estimate = 5.46'
[Tue May 29 11:06:17 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue May 29 11:06:17 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue May 29 11:06:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.326
[Tue May 29 11:06:17 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 9.16"
[Tue May 29 22:34:36 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_src44.ximg exists
[Tue May 29 22:34:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_src44.csv
[Tue May 29 22:34:36 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue May 29 22:34:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_src44.csv
[Tue May 29 22:34:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 22:34:38 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue May 29 22:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue May 29 22:34:38 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue May 29 22:34:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue May 29 22:34:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:13:09 2012] Warning, spatial fit 44 centroid is now closest to src. 25
[Thu May 31 13:13:10 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:13:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:13:10 2012] Assessing source extent using major
[Thu May 31 13:13:10 2012] Source does appear to be extended
[Thu May 31 13:13:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:13:10 2012] Source is confused with source 53
[Thu May 31 13:14:12 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:14:12 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Thu May 31 13:14:12 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.326
[Thu May 31 13:14:12 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 9.16"
[Fri Jun  1 05:32:52 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_src44.ximg exists
[Fri Jun  1 05:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_src44.csv
[Fri Jun  1 05:32:52 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Jun  1 05:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_src44.csv
[Fri Jun  1 05:32:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:32:53 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Jun  1 05:32:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri Jun  1 05:32:53 2012] fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Jun  1 05:32:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri Jun  1 05:32:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:43:03 2012] Warning, spatial fit 44 centroid is now closest to src. 53
[Thu Jun  7 11:43:04 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:43:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:43:04 2012] Assessing source extent using major
[Thu Jun  7 11:43:04 2012] Source does appear to be extended
[Thu Jun  7 11:43:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 11:44:37 2012] XMMSAS src. selection expression = ellipse(19612.230896, 27702.885742, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  7 11:44:37 2012] Writing source region out to fullrun_pn_xmm0122340401_pi300-10000_pass1_cl_src52_src.reg
[Thu Jun  7 11:44:37 2012] Extracting stamp from image fullrun_pn_xmm0122340401_pi300-10000_cl_sm2.00.img.gz, (188, 281) - (263, 356)
[Thu Jun  7 11:44:37 2012] XMMSAS bgd. selection expression = annulus(19612.230896, 27702.885742, 1087.500000, 2175.000000, X, Y) && !ellipse(21863.136856, 24220.042206, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21001.601089, 23967.925934, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22393.153717, 22977.382294, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22734.952600, 24291.752020, 3832.896110, 3832.896110, 0.000000, X, Y) && !ellipse(22870.350098, 23013.031372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21004.646408, 24479.815582, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21057.953400, 24704.134600, 4108.992118, 2547.360073, 5.057000, X, Y) && !ellipse(22244.413666, 30315.031006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21663.740000, 29943.831193, 1346.304039, 1346.304039, -0.000000, X, Y) && !ellipse(22182.516968, 29357.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22608.944800, 28674.278000, 1322.184038, 165.272805, 88.770000, X, Y) && !ellipse(22008.486000, 28309.698000, 1399.608040, 1399.608040, 0.000000, X, Y) && !ellipse(21071.458893, 28655.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.758636, 27694.779938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21973.775909, 27616.217621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21029.291718, 25960.496216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19609.249298, 25787.895416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19613.156174, 24741.320038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20804.112045, 23012.587982, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19638.226288, 27087.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18822.987595, 27180.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21073.353256, 29685.797028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20976.803116, 29086.386993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19589.748108, 28380.297882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17508.410000, 26743.116000, 975.224028, 975.224028, 0.000000, X, Y) && !ellipse(17804.848907, 26326.460144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17537.333466, 25257.279846, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 11:44:37 2012] Writing fullrun_pn_xmm0122340401_pi300-10000_pass1_cl_src52.gif
[Thu Jun  7 16:15:35 2012] Mean detx,y = (5296.63, 3185.94) 
[Thu Jun  7 16:15:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 16:15:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 16:15:56 2012] Setting source spectrum file to fullrun_pn_xmm0122340401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Jun  7 16:15:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0122340401_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Jun  9 02:11:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  9 02:11:30 2012] rmf not generated due to insufficient counts