[Tue May 29 10:52:06 2012] Detection parameters:
  Position = (300.8, 247.2) = 18 14 17.56 -17 11 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.3 +/- 37.6
  Background counts = 450.0
  Rate = 0.02 +/- 0.002

[Tue May 29 10:52:08 2012] Off-axis axis estimate = 3.72'
[Tue May 29 22:34:39 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Tue May 29 22:34:39 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Tue May 29 22:34:39 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080
[Tue May 29 22:34:39 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.29"
[Wed May 30 22:10:19 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src53.ximg exists
[Wed May 30 22:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src53.csv
[Wed May 30 22:10:19 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed May 30 22:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src53.csv
[Wed May 30 22:10:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:10:22 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed May 30 22:10:22 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed May 30 22:10:22 2012] Fit fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Thu May 31 13:13:31 2012] Source 59 is offset by -0.536472 and 5.327090 pixels which is larger than
2 X fitted extent = 1.128786 x 1.128786, not incorporating fit results
[Thu May 31 13:13:32 2012] Source 59 is offset by -2.979077 and -5.531142 pixels which is larger than
2 X fitted extent = 4.870437 x 4.870437, not incorporating fit results
[Thu May 31 13:13:32 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:13:32 2012] Assessing source extent using major
[Thu May 31 13:13:32 2012] Source does appear to be extended
[Thu May 31 13:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:32:54 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 05:32:54 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Fri Jun  1 05:32:54 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080
[Fri Jun  1 05:32:54 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 8.29"
[Wed Jun  6 20:28:36 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src50.ximg exists
[Wed Jun  6 20:28:36 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed Jun  6 20:28:36 2012] Fit fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src50 appears to have run properly
[Wed Jun  6 20:28:38 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed Jun  6 20:28:38 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Jun  6 20:28:38 2012] Fit fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Thu Jun  7 11:43:28 2012] Source 59 is offset by 5.317406 and 0.940798 pixels which is larger than
2 X fitted extent = 3.060745 x 3.060745, not incorporating fit results
[Thu Jun  7 11:43:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:43:28 2012] Assessing source extent using major
[Thu Jun  7 11:43:28 2012] Source does appear to be extended
[Thu Jun  7 11:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 02:51:57 2012] XMMSAS src. selection expression = ellipse(26117.132324, 21455.062836, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 02:51:57 2012] Writing source region out to fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src59_src.reg
[Sat Jun  9 02:51:57 2012] Extracting stamp from image fullrun_mos1_xmm0122340401_pi300-10000_cl_sm2.00.img.gz, (263, 210) - (338, 285)
[Sat Jun  9 02:51:57 2012] XMMSAS bgd. selection expression = annulus(26117.132324, 21455.062836, 1087.500000, 2175.000000, X, Y) && !ellipse(22188.154000, 24131.710000, 7765.536223, 7765.536223, 0.000000, X, Y) && !ellipse(21888.106000, 24643.216400, 3882.768112, 3882.768112, 0.000000, X, Y) && !ellipse(22390.309800, 24416.600000, 7920.432228, 7920.432228, 0.000000, X, Y) && !ellipse(21946.536000, 23927.572000, 8009.808230, 8009.808230, 0.000000, X, Y) && !ellipse(22785.960000, 24477.471400, 3806.904110, 3806.904110, 0.000000, X, Y) && !ellipse(22384.584000, 23533.388000, 7613.808219, 7613.808219, 0.000000, X, Y) && !ellipse(27613.142000, 22983.424000, 1223.440035, 1223.440035, 0.000000, X, Y) && !ellipse(24691.336456, 22364.872345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.692200, 20058.975418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.704000, 20319.830000, 1371.344039, 1371.344039, 0.000000, X, Y) && !ellipse(25138.482000, 21943.784000, 1278.952037, 1278.952037, 0.000000, X, Y) && !ellipse(26425.044000, 24148.065400, 1162.624033, 1162.624033, 0.000000, X, Y) && !ellipse(29223.712400, 24119.241800, 1274.968037, 1274.968037, 0.000000, X, Y) && !ellipse(28696.260800, 24135.607000, 594.066417, 594.066417, 0.000000, X, Y) && !ellipse(27049.342000, 24218.926000, 734.964821, 734.964821, 0.000000, X, Y) && !ellipse(24200.942000, 21312.242000, 1371.344039, 1371.344039, 0.000000, X, Y) && !ellipse(26586.154000, 23129.022000, 1223.440035, 1223.440035, 0.000000, X, Y) && !ellipse(26632.454000, 23092.726000, 699.895220, 699.895220, 0.000000, X, Y) && !ellipse(23209.758000, 20213.527400, 1454.888042, 1454.888042, 0.000000, X, Y) && !ellipse(27653.927002, 23547.948090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.914741, 21259.674194, 1330.653721, 958.961614, 12.454294, X, Y) && !ellipse(27150.076782, 23265.970703, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 02:51:57 2012] Writing fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src59.gif
[Sat Jun  9 05:13:22 2012] Mean detx,y = (3010.95, -1571.60) 
[Sat Jun  9 05:13:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 05:13:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 05:13:40 2012] Setting source spectrum file to fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat Jun  9 05:13:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src59_bgd.pi.gz