[Tue May 29 10:52:06 2012] Detection parameters:
  Position = (215.9, 231.1) = 18 14 43.32 -17 12 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.3 +/- 25.5
  Background counts = 347.0
  Rate = 0.02 +/- 0.002

[Tue May 29 10:52:08 2012] Off-axis axis estimate = 7.72'
[Tue May 29 22:34:39 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue May 29 22:34:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 22:34:39 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Tue May 29 22:34:39 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.913
[Tue May 29 22:34:39 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 10.29"
[Wed May 30 22:10:19 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src47.ximg exists
[Wed May 30 22:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src47.csv
[Wed May 30 22:10:19 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed May 30 22:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src47.csv
[Wed May 30 22:10:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:10:22 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed May 30 22:10:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed May 30 22:10:22 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed May 30 22:10:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed May 30 22:10:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122340401_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:13:31 2012] Spatial fit model total counts = 3177.610000, observed total counts = 2887.000000
[Thu May 31 13:13:31 2012] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 13:13:32 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:13:32 2012] Assessing source extent using major
[Thu May 31 13:13:32 2012] Source does appear to be extended
[Thu May 31 13:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:13:32 2012] Source is confused with source 48
[Fri Jun  1 05:32:54 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 05:32:54 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Fri Jun  1 05:32:54 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.913
[Fri Jun  1 05:32:54 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 10.29"
[Wed Jun  6 20:28:36 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src45.ximg exists
[Wed Jun  6 20:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src45.csv
[Wed Jun  6 20:28:36 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src45_1.ximg exists
[Wed Jun  6 20:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src45.csv
[Wed Jun  6 20:28:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 20:28:38 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Wed Jun  6 20:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Wed Jun  6 20:28:38 2012] fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Wed Jun  6 20:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Wed Jun  6 20:28:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122340401_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:43:28 2012] Warning, spatial fit 45 centroid is now closest to src. 42
[Thu Jun  7 11:43:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:43:28 2012] Assessing source extent using major
[Thu Jun  7 11:43:28 2012] Source does appear to be extended
[Thu Jun  7 11:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 02:51:57 2012] XMMSAS src. selection expression = ellipse(18734.237930, 20053.621552, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 02:51:57 2012] Writing source region out to fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src47_src.reg
[Sat Jun  9 02:51:57 2012] Extracting stamp from image fullrun_mos1_xmm0122340401_pi300-10000_cl_sm2.00.img.gz, (178, 194) - (253, 269)
[Sat Jun  9 02:51:57 2012] XMMSAS bgd. selection expression = annulus(18734.237930, 20053.621552, 1087.500000, 2175.000000, X, Y) && !ellipse(22188.154000, 24131.710000, 7765.536223, 7765.536223, 0.000000, X, Y) && !ellipse(21888.106000, 24643.216400, 3882.768112, 3882.768112, 0.000000, X, Y) && !ellipse(22390.309800, 24416.600000, 7920.432228, 7920.432228, 0.000000, X, Y) && !ellipse(21946.536000, 23927.572000, 8009.808230, 8009.808230, 0.000000, X, Y) && !ellipse(22785.960000, 24477.471400, 3806.904110, 3806.904110, 0.000000, X, Y) && !ellipse(22384.584000, 23533.388000, 7613.808219, 7613.808219, 0.000000, X, Y) && !ellipse(20458.903809, 21354.328369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.278000, 21222.865200, 1491.616043, 1491.616043, 0.000000, X, Y) && !ellipse(19036.284683, 21367.742905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17804.161255, 22750.225952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18630.286896, 21876.037643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22201.960000, 20007.696000, 1473.608042, 1473.608042, 0.000000, X, Y) && !ellipse(21105.954000, 20109.094000, 1576.744045, 1576.744045, 0.000000, X, Y) && !ellipse(17909.147751, 22124.002777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19282.258545, 19993.191757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19933.539886, 19708.027008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17992.536911, 21506.963348, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 02:51:57 2012] Writing fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src47.gif
[Sat Jun  9 05:00:15 2012] Mean detx,y = (4552.92, 5650.95) 
[Sat Jun  9 05:00:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 05:00:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 05:00:34 2012] Setting source spectrum file to fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jun  9 05:00:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0122340401_pi300-10000_pass1_cl_src47_bgd.pi.gz