[Sat Jun  9 09:55:46 2012] Detection parameters:
  Position = (396.3, 348.2) = 5 34 5.69 22 3 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.8 +/- 30.5
  Background counts = 234.6
  Rate = 0.02 +/- 0.002

[Sat Jun  9 09:55:48 2012] Off-axis axis estimate = 7.96'
[Sat Jun  9 21:28:13 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 21:28:13 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Sat Jun  9 21:28:13 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076
[Sat Jun  9 21:28:13 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.41"
[Sun Jun 10 08:07:58 2012] fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jun 10 08:07:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_src42.csv
[Sun Jun 10 08:07:58 2012] fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jun 10 08:07:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_src42.csv
[Sun Jun 10 08:07:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 08:08:02 2012] fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jun 10 08:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jun 10 08:08:02 2012] fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jun 10 08:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jun 10 08:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 08:08:51 2012] Spatial fit model total counts = 4549.590000, observed total counts = 3947.000000
[Sun Jun 10 08:08:51 2012] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 10 08:08:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 08:08:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 08:08:51 2012] Assessing source extent using major
[Sun Jun 10 08:08:51 2012] Source does appear to be extended
[Sun Jun 10 08:08:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 08:08:51 2012] Source is confused with source 73
[Sun Jun 10 17:44:38 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:44:38 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Sun Jun 10 17:44:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076
[Sun Jun 10 17:44:38 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 10.41"