[Sat Jun  9 09:54:44 2012] Detection parameters:
  Position = (391.5, 339.1) = 5 34 7.18 22 2 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 549.7 +/- 41.3
  Background counts = 317.4
  Rate = 0.04 +/- 0.003

[Sat Jun  9 09:54:48 2012] Off-axis axis estimate = 7.36'
[Sat Jun  9 10:08:37 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 10:08:37 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Sat Jun  9 10:08:37 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.564
[Sat Jun  9 10:08:37 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.11"
[Sat Jun  9 21:28:07 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  9 21:28:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_src6.csv
[Sat Jun  9 21:28:07 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  9 21:28:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_src6.csv
[Sat Jun  9 21:28:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 21:28:10 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  9 21:28:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  9 21:28:10 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  9 21:28:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  9 21:28:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122330801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 08:08:30 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Sun Jun 10 08:08:31 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 08:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 08:08:31 2012] Assessing source extent using major
[Sun Jun 10 08:08:31 2012] Source does appear to be extended
[Sun Jun 10 08:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 08:08:31 2012] Source is confused with source 6
[Sun Jun 10 08:09:12 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 08:09:12 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Sun Jun 10 08:09:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.564
[Sun Jun 10 08:09:12 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.11"
[Sun Jun 10 17:44:32 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 10 17:44:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_src6.csv
[Sun Jun 10 17:44:32 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 10 17:44:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_src6.csv
[Sun Jun 10 17:44:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:44:35 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 10 17:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 10 17:44:35 2012] fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 10 17:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 10 17:44:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122330801_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes