[Sun Jun 23 22:41:06 2013] Detection parameters:
  Position = (378.2, 130.8) = 5 34 6.25 22 17 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.1 +/- 13.3
  Background counts = 15.2
  Rate = 0.02 +/- 0.003

[Sun Jun 23 22:41:07 2013] Off-axis axis estimate = 13.46'
[Sun Jun 23 22:41:37 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 22:41:37 2013] Initial guess for spatial extent in simple fitting = 13.16"
[Sun Jun 23 22:41:37 2013] source mask rpix=3.0, npix_max = 49, mask sum = 33, frac = 0.664
[Sun Jun 23 22:41:37 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 13.16"
[Sun Jun 23 22:41:38 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun 23 22:41:38 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_src41.csv
[Sun Jun 23 22:41:38 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun 23 22:41:38 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_src41.csv
[Sun Jun 23 22:41:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 22:41:40 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun 23 22:41:40 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun 23 22:41:40 2013] Fit fullrun_mos2_xmm0121910201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Jun 23 22:42:12 2013] Source 43 is offset by -4.795570 and 0.297337 pixels which is larger than
2 X fitted extent = 1.531412 x 1.531412, not incorporating fit results
[Sun Jun 23 22:42:12 2013] Source 43 is offset by -5.433433 and -3.642617 pixels which is larger than
2 X fitted extent = 1.449710 x 1.449710, not incorporating fit results
[Sun Jun 23 22:42:12 2013] Warning, spatial fit 41 centroid is now closest to src. 40
[Sun Jun 23 22:42:12 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 22:42:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 22:42:12 2013] Assessing source extent using major
[Sun Jun 23 22:42:12 2013] Source does appear to be extended
[Sun Jun 23 22:42:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 22:42:12 2013] Source is confused with source 32
[Sun Jun 23 22:42:28 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 22:42:28 2013] Initial guess for spatial extent in simple fitting = 13.16"
[Sun Jun 23 22:42:28 2013] source mask rpix=3.0, npix_max = 49, mask sum = 33, frac = 0.664
[Sun Jun 23 22:42:28 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 13.16"
[Sun Jun 23 22:42:29 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_src40.ximg exists
[Sun Jun 23 22:42:29 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Jun 23 22:42:29 2013] Fit fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_src40 appears to have run properly
[Sun Jun 23 22:42:31 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Jun 23 22:42:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 23 22:42:31 2013] fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Jun 23 22:42:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 23 22:42:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121910201_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 22:43:00 2013] Spatial fit model total counts = 1573.820000, observed total counts = 642.000000
[Sun Jun 23 22:43:00 2013] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 22:43:00 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 17.168435 pixels away
[Sun Jun 23 22:43:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 22:43:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 22:43:00 2013] Assessing source extent using major
[Sun Jun 23 22:43:00 2013] Source does appear to be extended
[Sun Jun 23 22:43:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 22:43:23 2013] XMMSAS src. selection expression = ellipse(32851.789368, 11327.594299, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 22:43:23 2013] Not overwriting source region fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43_src.reg
[Sun Jun 23 22:43:23 2013] Extracting stamp from image fullrun_mos2_xmm0121910201_pi300-10000_cl_sm2.00.img.gz, (341, 93) - (416, 168)
[Sun Jun 23 22:43:23 2013] XMMSAS bgd. selection expression = annulus(32851.789368, 11327.594299, 1087.500000, 2175.000000, X, Y) && !ellipse(31937.590000, 12120.728000, 2017.992058, 2017.992058, 0.000000, X, Y) && !ellipse(32153.473200, 11361.650000, 1905.096055, 1905.096055, 0.000000, X, Y) && !ellipse(31900.906000, 12202.192000, 2396.600069, 2396.600069, 0.000000, X, Y) && !ellipse(32033.050018, 10920.983864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32152.268799, 10294.762680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.508254, 10669.341341, 1991.279311, 1068.523416, 90.000000, X, Y) && !ellipse(30573.126000, 13770.844000, 1960.400056, 1960.400056, 0.000000, X, Y) && !ellipse(32310.368000, 11461.896600, 2045.272059, 2045.272059, 0.000000, X, Y) && !ellipse(32348.194031, 12540.678513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29010.552000, 11862.654160, 3731.344107, 3731.344107, 0.000000, X, Y) && !ellipse(28493.452000, 11680.586000, 2937.448085, 2937.448085, 0.000000, X, Y) && !ellipse(30934.136047, 14197.124741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31153.539703, 12561.805908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31284.037048, 10340.117218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.158000, 11656.058000, 1351.616039, 1351.616039, 0.000000, X, Y) && !ellipse(33232.466000, 14157.194000, 1975.168057, 1975.168057, 0.000000, X, Y) && !ellipse(31221.120819, 12984.199829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33022.600677, 13623.310516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30407.674000, 13172.386000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(31241.816772, 10842.463364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30514.962677, 12129.344116, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 22:43:23 2013] Writing fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43.gif
[Sun Jun 23 23:18:12 2013] Mean detx,y = (-5735.54, -15982.54) 
[Sun Jun 23 23:18:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 23:18:26 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 23:18:26 2013] Setting source spectrum file to fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jun 23 23:18:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Jun 24 00:50:19 2013] Not generating rmf since there are only 82 counts
[Mon Jun 24 00:50:19 2013] rmf not generated due to insufficient counts
[Mon Jun 24 01:21:15 2013] Updating aperture counts using extracted products
[Mon Jun 24 01:21:15 2013] Total counts from fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 353.00
[Mon Jun 24 01:21:15 2013] Total counts from fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43_bgd.pi.gz = 23.00
[Mon Jun 24 01:21:15 2013] Got source and background scale factors 855936.000000, 192574.000000
[Mon Jun 24 01:21:15 2013] User source parameters:
  Position = (378.2, 130.8) = 5 34 6.25 22 17 10.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 250.8 +/- 19.8
  Background aperture counts = 102.2
  Rate = 0.06 +/- 0.004

[Mon Jun 24 01:21:15 2013] Updating counts from extracted products
[Mon Jun 24 01:21:15 2013] Set source signif. to 250.77/10.11 = 24.80
[Mon Jun 24 01:21:20 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 01:21:20 2013] Using photon index=1.80, rate=0.0558, arf fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43.arf
[Mon Jun 24 01:21:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 01:21:20 2013] Updating source flux to 2.9e-12
[Mon Jun 24 01:21:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 01:22:06 2013] xmm0121910201/analysis//spectral/fullrun_mos2_xmm0121910201_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete