[Wed Jul 25 20:38:45 2012] Detection parameters:
  Position = (371.7, 230.0) = 5 16 46.00 45 54 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1415.0 +/- 46.9
  Background counts = 25.3
  Rate = 0.2 +/- 0.005

[Wed Jul 25 20:38:45 2012] Off-axis axis estimate = 7.27'
[Wed Jul 25 20:41:15 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 20:41:15 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Wed Jul 25 20:41:15 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.137
[Wed Jul 25 20:41:15 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.06"
[Wed Jul 25 23:50:33 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_src38.ximg exists
[Wed Jul 25 23:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_src38.csv
[Wed Jul 25 23:50:33 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Jul 25 23:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_src38.csv
[Wed Jul 25 23:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:50:34 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Jul 25 23:50:34 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Jul 25 23:50:34 2012] Fit fullrun_pn_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Thu Jul 26 06:11:49 2012] Warning, spatial fit 38 centroid is now closest to src. 38
[Thu Jul 26 06:11:49 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:11:49 2012] Assessing source extent using major
[Thu Jul 26 06:11:49 2012] Source does appear to be extended
[Thu Jul 26 06:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 06:11:49 2012] Source is confused with source 39
[Thu Jul 26 06:11:49 2012] Source is confused with source 41
[Thu Jul 26 06:12:15 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 06:12:15 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Thu Jul 26 06:12:15 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.137
[Thu Jul 26 06:12:15 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.06"
[Thu Jul 26 08:42:03 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jul 26 08:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_src31.csv
[Thu Jul 26 08:42:03 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jul 26 08:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_src31.csv
[Thu Jul 26 08:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:42:04 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jul 26 08:42:04 2012] fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jul 26 08:42:04 2012] Fit fullrun_pn_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jul 26 14:42:31 2012] Warning, spatial fit 31 centroid is now closest to src. 38
[Thu Jul 26 14:42:31 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 11.146536 pixels away
[Thu Jul 26 14:42:31 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.820234 pixels away
[Thu Jul 26 14:42:31 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:42:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:42:31 2012] Assessing source extent using major
[Thu Jul 26 14:42:31 2012] Source does appear to be extended
[Thu Jul 26 14:42:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 14:42:55 2012] Counts = 1414.976440, rescaling region sizes by 2.000000
[Thu Jul 26 14:42:55 2012] XMMSAS src. selection expression = ellipse(32292.350800, 19961.790726, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jul 26 14:42:55 2012] Writing source region out to fullrun_pn_xmm0121500301_pi300-10000_pass1_cl_src40_src.reg
[Thu Jul 26 14:42:55 2012] Extracting stamp from image fullrun_pn_xmm0121500301_pi300-10000_cl_sm2.00.img.gz, (297, 155) - (447, 305)
[Thu Jul 26 14:42:55 2012] XMMSAS bgd. selection expression = annulus(32292.350800, 19961.790726, 4350.000000, 8700.000000, X, Y) && !ellipse(31235.948862, 12793.587146, 2381.568069, 489.972712, 99.036239, X, Y) && !ellipse(31679.931800, 15784.523600, 2381.568069, 452.818413, 99.891000, X, Y) && !ellipse(31639.655524, 15516.944240, 1886.792054, 439.473757, 99.656674, X, Y) && !ellipse(31458.792800, 14283.773400, 1886.792054, 435.717613, 100.041900, X, Y) && !ellipse(24352.809601, 14939.224014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31357.555400, 13538.924000, 1915.992055, 507.052015, 90.000000, X, Y) && !ellipse(31258.449670, 13047.502250, 1915.992055, 559.108915, 90.000000, X, Y) && !ellipse(33247.835600, 26430.405600, 2065.401659, 2065.401659, 0.000000, X, Y) && !ellipse(31596.914000, 29725.658000, 1479.336043, 1479.336043, 0.000000, X, Y) && !ellipse(31541.073090, 28051.076904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32633.832703, 27922.900055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32925.286000, 27372.260000, 1564.416045, 1564.416045, 0.000000, X, Y) && !ellipse(33737.517761, 27765.730286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34277.457794, 27682.548218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31962.107635, 26944.402283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35032.659637, 26473.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35098.976959, 25763.094788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31757.861542, 25611.620056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34836.559174, 24963.312347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32853.079918, 23763.954919, 1769.328051, 472.932420, 90.000000, X, Y) && !ellipse(31599.717377, 24478.695160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32814.959600, 23513.632000, 853.696025, 853.696025, 0.000000, X, Y) && !ellipse(29196.090500, 23358.298200, 521.252815, 302.994409, 34.763000, X, Y) && !ellipse(35781.083191, 23201.156128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32725.280800, 22806.354000, 727.813621, 727.813621, 0.000000, X, Y) && !ellipse(32648.183136, 22309.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32597.271200, 21981.237800, 752.331222, 752.331222, 0.000000, X, Y) && !ellipse(32469.624451, 21177.475540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32400.332600, 20690.787400, 772.776822, 772.776822, 0.000000, X, Y) && !ellipse(32212.320200, 19403.630800, 849.152024, 849.152024, 0.000000, X, Y) && !ellipse(32106.179400, 18581.536000, 726.704821, 726.704821, 0.000000, X, Y) && !ellipse(32033.325200, 18258.392000, 795.574423, 795.574423, 0.000000, X, Y) && !ellipse(31904.777800, 17361.726640, 1769.328051, 498.320814, 90.000000, X, Y) && !ellipse(31778.450560, 16432.512800, 1769.328051, 513.089615, 90.000000, X, Y) && !ellipse(31572.065247, 15003.319077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31145.662231, 12255.362427, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 14:42:55 2012] Writing fullrun_pn_xmm0121500301_pi300-10000_pass1_cl_src40.gif
[Thu Jul 26 16:45:57 2012] Mean detx,y = (6121.70, 6432.55) 
[Thu Jul 26 16:46:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 16:49:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 16:49:10 2012] Setting source spectrum file to fullrun_pn_xmm0121500301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jul 26 16:49:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0121500301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Jul 26 18:06:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 18:06:13 2012] rmf not generated due to insufficient counts
[Thu Jul 26 21:43:33 2012] Updating aperture counts using extracted products
[Thu Jul 26 21:43:33 2012] Error reading totcts from fullrun_pn_xmm0121500301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jul 26 21:43:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 21:43:34 2012] Using photon index=1.80, rate=0.164, arf fullrun_pn_xmm0121500301_pi300-10000_pass1_cl_src40.arf
[Thu Jul 26 21:43:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 21:43:34 2012] Updating source flux to 7.2e-13
[Thu Jul 26 22:00:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting