[Wed Jul 25 20:39:37 2012] Detection parameters:
  Position = (393.9, 304.7) = 5 16 36.71 45 59 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.1 +/- 23.8
  Background counts = 27.0
  Rate = 0.03 +/- 0.002

[Wed Jul 25 20:39:38 2012] Off-axis axis estimate = 6.93'
[Thu Jul 26 03:21:15 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 03:21:15 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Thu Jul 26 03:21:15 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.844
[Thu Jul 26 03:21:15 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.90"
[Thu Jul 26 06:11:36 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul 26 06:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src11.csv
[Thu Jul 26 06:11:36 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul 26 06:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src11.csv
[Thu Jul 26 06:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul 26 06:11:37 2012] Fit fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul 26 06:12:03 2012] Source 20 is offset by -3.302209 and 5.176975 pixels which is larger than
2 X fitted extent = 2.431310 x 2.431310, not incorporating fit results
[Thu Jul 26 06:12:03 2012] Warning, spatial fit 11 centroid is now closest to src. 12
[Thu Jul 26 06:12:03 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:12:03 2012] Assessing source extent using major
[Thu Jul 26 06:12:03 2012] Source does appear to be extended
[Thu Jul 26 06:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 11:18:21 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 11:18:21 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Thu Jul 26 11:18:21 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.844
[Thu Jul 26 11:18:21 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.90"
[Thu Jul 26 14:42:20 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jul 26 14:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src7.csv
[Thu Jul 26 14:42:20 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jul 26 14:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src7.csv
[Thu Jul 26 14:42:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:42:21 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jul 26 14:42:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jul 26 14:42:21 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jul 26 14:42:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jul 26 14:42:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:42:43 2012] Spatial fit model total counts = 3006.310000, observed total counts = 3191.000000
[Thu Jul 26 14:42:43 2012] Offset between fit and detection position for source 20 = 4.032277 pixels
[Thu Jul 26 14:42:43 2012] Warning, changing simple spatial fit ID from 7 to 6
[Thu Jul 26 14:42:43 2012] 2075.207200 total counts/ 41.947200 bgd. counts: snr = 313.936223
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 4.032277 pixels
  Position = (396.1, 301.4) = 5 16 35.79 45 59 39.5
  Extent = 19.6 (19.5-39.2)", rotation angle = 0
  Source counts = 2033.3 +/- 45.6
  Background counts = 41.9
  Rate = 0.1 +/- 0.003
[Thu Jul 26 14:42:43 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:42:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:42:43 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 14:42:43 2012] Source does appear to be extended
[Thu Jul 26 14:42:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 14:42:43 2012] Source is confused with source 27
[Thu Jul 26 14:42:43 2012] Source is confused with source 13
[Thu Jul 26 19:59:09 2012] Counts = 2033.260000, rescaling region sizes by 2.000000
[Thu Jul 26 19:59:09 2012] XMMSAS src. selection expression = ellipse(34411.062000, 26169.714000, 2354.172068, 2354.172068, 0.000000, X, Y)
[Thu Jul 26 19:59:09 2012] Writing source region out to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src20_src.reg
[Thu Jul 26 19:59:09 2012] Extracting stamp from image fullrun_mos2_xmm0121500301_pi300-10000_cl_sm2.00.img.gz, (261, 166) - (531, 437)
[Thu Jul 26 19:59:09 2012] XMMSAS bgd. selection expression = annulus(34411.062000, 26169.714000, 7847.240226, 15694.480452, X, Y) && !ellipse(33117.892232, 27275.742075, 1518.520044, 772.180087, 346.277723, X, Y) && !ellipse(33098.616000, 25519.234000, 952.912027, 952.912027, 0.000000, X, Y) && !ellipse(24381.311340, 14926.883438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32618.460000, 27055.898000, 1224.160035, 1224.160035, 0.000000, X, Y) && !ellipse(33920.632477, 24994.357605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34022.434265, 25597.160767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34520.278809, 27160.519012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33319.727661, 16471.944550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34243.818573, 27636.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19929.565308, 15025.578842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31512.212000, 24700.668000, 1441.632041, 1441.632041, 0.000000, X, Y) && !ellipse(31804.590000, 27798.330000, 874.672025, 874.672025, 0.000000, X, Y) && !ellipse(32084.517000, 28972.834000, 1187.264034, 1187.264034, 0.000000, X, Y) && !ellipse(33309.968000, 24545.310000, 1511.616043, 1511.616043, 0.000000, X, Y) && !ellipse(31113.257599, 27210.648621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30977.746800, 25376.421000, 705.470420, 705.470420, 0.000000, X, Y) && !ellipse(31616.460000, 26448.387000, 1385.680040, 460.192813, 353.275000, X, Y) && !ellipse(21777.992880, 26640.625200, 354.344010, 354.344010, 0.000000, X, Y) && !ellipse(30828.814000, 28574.116000, 1565.320045, 1565.320045, 0.000000, X, Y) && !ellipse(30552.541800, 27364.800800, 1343.248039, 1343.248039, 0.000000, X, Y) && !ellipse(32580.620000, 23879.658000, 1385.680040, 1385.680040, 0.000000, X, Y) && !ellipse(30453.154000, 28857.616000, 1377.528040, 1377.528040, 0.000000, X, Y) && !ellipse(30702.022000, 25296.476000, 1327.136038, 783.823223, 334.532000, X, Y) && !ellipse(30570.942000, 23649.636000, 1393.736040, 1393.736040, 0.000000, X, Y) && !ellipse(29983.822000, 29215.800000, 1491.216043, 1277.768037, 0.000000, X, Y)
[Thu Jul 26 19:59:09 2012] Writing fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src20.gif
[Thu Jul 26 20:11:19 2012] Mean detx,y = (-6115.68, -182.13) 
[Thu Jul 26 20:11:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 20:18:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 20:18:53 2012] Setting source spectrum file to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul 26 20:18:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jul 26 21:43:35 2012] Updating aperture counts using extracted products
[Thu Jul 26 21:43:35 2012] Error reading totcts from fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul 26 21:43:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 21:43:35 2012] Using photon index=1.80, rate=0.137, arf fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src20.arf
[Thu Jul 26 21:43:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 21:43:35 2012] Updating source flux to 1.5e-12
[Thu Jul 26 21:50:29 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Thu Jul 26 21:50:29 2012] Flag c found in src. 20 procflags, skipping spectral fitting