[Wed Jul 25 20:39:37 2012] Detection parameters:
  Position = (250.9, 306.7) = 5 17 36.41 46 0 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.6 +/- 13.6
  Background counts = 10.1
  Rate = 0.009 +/- 0.001

[Wed Jul 25 20:39:38 2012] Off-axis axis estimate = 3.50'
[Thu Jul 26 03:21:15 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 03:21:15 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Thu Jul 26 03:21:15 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Thu Jul 26 03:21:15 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.18"
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jul 26 06:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src23.csv
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jul 26 06:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src23.csv
[Thu Jul 26 06:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:11:38 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jul 26 06:11:38 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jul 26 06:11:38 2012] Fit fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jul 26 06:12:03 2012] Source 19 is offset by -7.660401 and 6.240357 pixels which is larger than
2 X fitted extent = 0.940133 x 0.940133, not incorporating fit results
[Thu Jul 26 06:12:04 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:12:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:12:04 2012] Assessing source extent using major
[Thu Jul 26 06:12:04 2012] Source does appear to be extended
[Thu Jul 26 06:12:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 11:18:21 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 11:18:21 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Thu Jul 26 11:18:21 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Thu Jul 26 11:18:21 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.18"
[Thu Jul 26 14:42:20 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jul 26 14:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src19.csv
[Thu Jul 26 14:42:20 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jul 26 14:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src19.csv
[Thu Jul 26 14:42:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:42:21 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jul 26 14:42:21 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jul 26 14:42:21 2012] Fit fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Jul 26 14:42:43 2012] Spatial fit model total counts = 141.000000, observed total counts = 141.000000
[Thu Jul 26 14:42:43 2012] Offset between fit and detection position for source 19 = 0.055457 pixels
[Thu Jul 26 14:42:43 2012] 141.476700 total counts/ 74.093500 bgd. counts: snr = 7.828194
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.055457 pixels
  Position = (250.9, 306.8) = 5 17 36.40 46 0 3.3
  Extent = 4.4 (3.7-5.6)", rotation angle = 0
  Source counts = 67.4 +/- 11.9
  Background counts = 74.1
  Rate = 0.005 +/- 0.0008
[Thu Jul 26 14:42:43 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:42:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:42:43 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 14:42:43 2012] Source does appear to be extended
[Thu Jul 26 14:42:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 19:59:10 2012] XMMSAS src. selection expression = ellipse(21777.992880, 26640.625200, 265.758008, 265.758008, 0.000000, X, Y)
[Thu Jul 26 19:59:10 2012] Writing source region out to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src19_src.reg
[Thu Jul 26 19:59:10 2012] Extracting stamp from image fullrun_mos2_xmm0121500301_pi300-10000_cl_sm2.00.img.gz, (236, 291) - (266, 322)
[Thu Jul 26 19:59:10 2012] XMMSAS bgd. selection expression = annulus(21777.992880, 26640.625200, 442.930013, 885.860025, X, Y)
[Thu Jul 26 19:59:10 2012] Writing fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src19.gif
[Thu Jul 26 20:22:12 2012] Mean detx,y = (5393.76, -1552.51) 
[Thu Jul 26 20:22:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 20:22:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 20:22:21 2012] Setting source spectrum file to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul 26 20:22:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jul 26 21:11:41 2012] Not generating rmf since there are only 67 counts
[Thu Jul 26 21:11:41 2012] rmf not generated due to insufficient counts
[Thu Jul 26 21:43:35 2012] Updating aperture counts using extracted products
[Thu Jul 26 21:43:35 2012] Error reading totcts from fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul 26 21:43:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 21:43:36 2012] Using photon index=1.80, rate=0.00455, arf fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src19.arf
[Thu Jul 26 21:43:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 21:43:36 2012] Updating source flux to 8.2e-14
[Thu Jul 26 21:50:29 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Thu Jul 26 21:50:29 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting