[Wed Jul 25 20:39:37 2012] Detection parameters:
  Position = (388.2, 313.1) = 5 16 39.05 46 0 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1268.3 +/- 44.6
  Background counts = 26.8
  Rate = 0.1 +/- 0.004

[Wed Jul 25 20:39:38 2012] Off-axis axis estimate = 6.60'
[Thu Jul 26 03:21:15 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 03:21:15 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Thu Jul 26 03:21:15 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.935
[Thu Jul 26 03:21:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.73"
[Thu Jul 26 06:11:36 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 26 06:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src3.csv
[Thu Jul 26 06:11:36 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 26 06:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src3.csv
[Thu Jul 26 06:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 26 06:11:37 2012] Fit fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul 26 06:12:03 2012] Spatial fit model total counts = 3465.950000, observed total counts = 3498.000000
[Thu Jul 26 06:12:03 2012] Offset between fit and detection position for source 17 = 5.886481 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 5.886481 pixels
  Position = (383.3, 316.4) = 5 16 41.10 46 0 45.0
  Extent = 19.5 (19.5-19.5)", rotation angle = 0
  Source counts = 3007.9 +/- 54.8
  Background counts = 0.0
  Rate = 0.2 +/- 0.004
 Deleting source due to low signal-to-noise ratio