[Wed Jul 25 20:39:37 2012] Detection parameters:
  Position = (397.3, 312.7) = 5 16 35.25 46 0 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.2 +/- 21.9
  Background counts = 25.0
  Rate = 0.03 +/- 0.002

[Wed Jul 25 20:39:38 2012] Off-axis axis estimate = 7.25'
[Thu Jul 26 03:21:15 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 03:21:15 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jul 26 03:21:15 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.728
[Thu Jul 26 03:21:15 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.05"
[Thu Jul 26 06:11:36 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jul 26 06:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src12.csv
[Thu Jul 26 06:11:36 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jul 26 06:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src12.csv
[Thu Jul 26 06:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jul 26 06:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jul 26 06:11:37 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jul 26 06:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jul 26 06:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:12:03 2012] Warning, spatial fit 12 centroid is now closest to src. 12
[Thu Jul 26 06:12:03 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:12:03 2012] Assessing source extent using major
[Thu Jul 26 06:12:03 2012] Source does appear to be extended
[Thu Jul 26 06:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 06:12:04 2012] Source is confused with source 12
[Thu Jul 26 11:18:21 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 11:18:21 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jul 26 11:18:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.728
[Thu Jul 26 11:18:21 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.05"
[Thu Jul 26 14:42:20 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jul 26 14:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src8.csv
[Thu Jul 26 14:42:20 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jul 26 14:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src8.csv
[Thu Jul 26 14:42:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:42:21 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jul 26 14:42:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jul 26 14:42:21 2012] fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jul 26 14:42:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jul 26 14:42:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:42:43 2012] Warning, spatial fit 8 centroid is now closest to src. 12
[Thu Jul 26 14:42:43 2012] Source 13 is offset by -5.827370 and 2.917000 pixels which is larger than
2 X fitted extent = 1.146207 x 1.146207, not incorporating fit results
[Thu Jul 26 14:42:43 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:42:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:42:43 2012] Assessing source extent using major
[Thu Jul 26 14:42:43 2012] Source does appear to be extended
[Thu Jul 26 14:42:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 19:59:09 2012] XMMSAS src. selection expression = ellipse(34520.278809, 27160.519012, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 19:59:09 2012] Writing source region out to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src13_src.reg
[Thu Jul 26 19:59:09 2012] Extracting stamp from image fullrun_mos2_xmm0121500301_pi300-10000_cl_sm2.00.img.gz, (360, 275) - (435, 350)
[Thu Jul 26 19:59:09 2012] XMMSAS bgd. selection expression = annulus(34520.278809, 27160.519012, 1087.500000, 2175.000000, X, Y) && !ellipse(33117.892232, 27275.742075, 1518.520044, 772.180087, 346.277723, X, Y) && !ellipse(33098.616000, 25519.234000, 952.912027, 952.912027, 0.000000, X, Y) && !ellipse(32618.460000, 27055.898000, 1224.160035, 1224.160035, 0.000000, X, Y) && !ellipse(33920.632477, 24994.357605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34022.434265, 25597.160767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34411.062000, 26169.714000, 1569.448045, 1569.448045, 0.000000, X, Y) && !ellipse(34243.818573, 27636.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31512.212000, 24700.668000, 1441.632041, 1441.632041, 0.000000, X, Y) && !ellipse(31804.590000, 27798.330000, 874.672025, 874.672025, 0.000000, X, Y) && !ellipse(32084.517000, 28972.834000, 1187.264034, 1187.264034, 0.000000, X, Y) && !ellipse(33309.968000, 24545.310000, 1511.616043, 1511.616043, 0.000000, X, Y) && !ellipse(31616.460000, 26448.387000, 1385.680040, 460.192813, 353.275000, X, Y) && !ellipse(30828.814000, 28574.116000, 1565.320045, 1565.320045, 0.000000, X, Y) && !ellipse(32580.620000, 23879.658000, 1385.680040, 1385.680040, 0.000000, X, Y)
[Thu Jul 26 19:59:09 2012] Writing fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src13.gif
[Thu Jul 26 20:18:56 2012] Mean detx,y = (-6943.31, 878.48) 
[Thu Jul 26 20:18:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 20:19:12 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 20:19:12 2012] Setting source spectrum file to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jul 26 20:19:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jul 26 20:44:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 20:44:13 2012] rmf not generated due to insufficient counts
[Thu Jul 26 21:43:35 2012] Updating aperture counts using extracted products
[Thu Jul 26 21:43:35 2012] Error reading totcts from fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jul 26 21:43:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 21:43:35 2012] Using photon index=1.80, rate=0.0278, arf fullrun_mos2_xmm0121500301_pi300-10000_pass1_cl_src13.arf
[Thu Jul 26 21:43:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 21:43:35 2012] Updating source flux to 4.1e-13
[Thu Jul 26 21:50:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting