[Wed Jul 25 20:39:09 2012] Detection parameters:
  Position = (395.2, 309.9) = 5 16 36.15 46 0 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 579.2 +/- 29.4
  Background counts = 22.5
  Rate = 0.05 +/- 0.002

[Wed Jul 25 20:39:09 2012] Off-axis axis estimate = 7.07'
[Wed Jul 25 23:50:34 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:50:34 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Wed Jul 25 23:50:34 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Wed Jul 25 23:50:34 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.96"
[Thu Jul 26 03:21:13 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jul 26 03:21:13 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jul 26 03:21:13 2012] Fit fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Jul 26 03:21:14 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jul 26 03:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul 26 03:21:14 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jul 26 03:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul 26 03:21:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:11:56 2012] Warning, spatial fit 6 centroid is now closest to src. 14
[Thu Jul 26 06:11:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:11:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:11:56 2012] Assessing source extent using major
[Thu Jul 26 06:11:56 2012] Source does appear to be extended
[Thu Jul 26 06:11:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 06:11:56 2012] Source is confused with source 11
[Thu Jul 26 08:42:04 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 08:42:04 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Jul 26 08:42:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Thu Jul 26 08:42:04 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.96"
[Thu Jul 26 11:18:20 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jul 26 11:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src6.csv
[Thu Jul 26 11:18:20 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jul 26 11:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src6.csv
[Thu Jul 26 11:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 11:18:20 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jul 26 11:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jul 26 11:18:20 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jul 26 11:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jul 26 11:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:42:37 2012] Warning, spatial fit 6 centroid is now closest to src. 14
[Thu Jul 26 14:42:37 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:42:37 2012] Assessing source extent using major
[Thu Jul 26 14:42:37 2012] Source does appear to be extended
[Thu Jul 26 14:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 18:21:13 2012] XMMSAS src. selection expression = ellipse(34334.506409, 26915.972229, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 18:21:13 2012] Writing source region out to fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src16_src.reg
[Thu Jul 26 18:21:13 2012] Extracting stamp from image fullrun_mos1_xmm0121500301_pi300-10000_cl_sm2.00.img.gz, (358, 272) - (433, 347)
[Thu Jul 26 18:21:13 2012] XMMSAS bgd. selection expression = annulus(34334.506409, 26915.972229, 1087.500000, 2175.000000, X, Y) && !ellipse(33180.650000, 25576.142000, 1116.384032, 1116.384032, 0.000000, X, Y) && !ellipse(32813.880000, 25577.034000, 1474.320042, 637.383218, 29.484200, X, Y) && !ellipse(33556.790000, 27368.076000, 619.796018, 619.796018, 0.000000, X, Y) && !ellipse(33097.579818, 27403.567473, 1603.632046, 734.241785, 155.227245, X, Y) && !ellipse(34180.047661, 25641.451867, 1527.797277, 220.463828, 44.008736, X, Y) && !ellipse(33790.597107, 27944.764221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34367.468000, 25980.848000, 1248.272036, 1248.272036, 0.000000, X, Y) && !ellipse(33341.992737, 24650.600342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31864.078000, 24880.350000, 1409.448041, 1409.448041, 0.000000, X, Y) && !ellipse(34308.723419, 27502.465546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32665.164703, 24743.515747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33207.844727, 28417.569183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34512.188934, 25206.672333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34009.034332, 24732.800049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34948.625305, 25841.412842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32403.721313, 28431.935547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33837.992035, 25191.095276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.546722, 26520.540131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30803.582000, 26830.588800, 1864.704054, 1864.704054, 0.000000, X, Y) && !ellipse(31368.558000, 26751.626600, 1363.144039, 1363.144039, 0.000000, X, Y)
[Thu Jul 26 18:21:13 2012] Writing fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src16.gif
[Thu Jul 26 18:39:16 2012] Mean detx,y = (842.61, 6837.71) 
[Thu Jul 26 18:39:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 18:39:34 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 18:39:34 2012] Setting source spectrum file to fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jul 26 18:39:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Jul 26 19:11:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 19:11:40 2012] rmf not generated due to insufficient counts
[Thu Jul 26 21:43:34 2012] Updating aperture counts using extracted products
[Thu Jul 26 21:43:34 2012] Error reading totcts from fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jul 26 21:43:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 21:43:34 2012] Using photon index=1.80, rate=0.0484, arf fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src16.arf
[Thu Jul 26 21:43:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 21:43:34 2012] Updating source flux to 6.2e-13
[Thu Jul 26 21:43:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting