[Wed Jul 25 20:39:09 2012] Detection parameters:
  Position = (322.6, 313.1) = 5 17 6.45 46 0 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 10.1
  Background counts = 18.3
  Rate = 0.003 +/- 0.0007

[Wed Jul 25 20:39:09 2012] Off-axis axis estimate = 2.05'
[Wed Jul 25 23:50:34 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:50:34 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Wed Jul 25 23:50:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Wed Jul 25 23:50:34 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.45"
[Thu Jul 26 03:21:14 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src32.ximg exists
[Thu Jul 26 03:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src32.csv
[Thu Jul 26 03:21:14 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Jul 26 03:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src32.csv
[Thu Jul 26 03:21:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 03:21:15 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Jul 26 03:21:15 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Jul 26 03:21:15 2012] Fit fullrun_mos1_xmm0121500301_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Thu Jul 26 06:11:56 2012] Source 13 is offset by 7.482080 and 5.904779 pixels which is larger than
2 X fitted extent = 0.856680 x 0.856680, not incorporating fit results
[Thu Jul 26 06:11:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:11:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:11:56 2012] Assessing source extent using major
[Thu Jul 26 06:11:56 2012] Source does appear to be extended
[Thu Jul 26 06:11:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:42:04 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 08:42:04 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Jul 26 08:42:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Thu Jul 26 08:42:04 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.45"
[Thu Jul 26 11:18:20 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jul 26 11:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src27.csv
[Thu Jul 26 11:18:20 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jul 26 11:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src27.csv
[Thu Jul 26 11:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 11:18:21 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jul 26 11:18:21 2012] fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jul 26 11:18:21 2012] Fit fullrun_mos1_xmm0121500301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jul 26 14:42:37 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 25.330699 pixels away
[Thu Jul 26 14:42:37 2012] Spatial fit model total counts = 166.673000, observed total counts = 166.000000
[Thu Jul 26 14:42:37 2012] Offset between fit and detection position for source 13 = 2.741210 pixels
[Thu Jul 26 14:42:37 2012] 168.848000 total counts/ 64.625000 bgd. counts: snr = 12.964724
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.741210 pixels
  Position = (324.7, 311.3) = 5 17 5.58 46 0 23.0
  Extent = 14.9 (14.9-29.8)", rotation angle = 0
  Source counts = 104.2 +/- 13.0
  Background counts = 64.6
  Rate = 0.007 +/- 0.0009
[Thu Jul 26 14:42:37 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:42:37 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 14:42:37 2012] Source does appear to be extended
[Thu Jul 26 14:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 18:21:14 2012] XMMSAS src. selection expression = ellipse(28202.298000, 27032.978000, 894.378026, 894.378026, 0.000000, X, Y)
[Thu Jul 26 18:21:14 2012] Writing source region out to fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src13_src.reg
[Thu Jul 26 18:21:14 2012] Extracting stamp from image fullrun_mos1_xmm0121500301_pi300-10000_cl_sm2.00.img.gz, (273, 260) - (376, 363)
[Thu Jul 26 18:21:14 2012] XMMSAS bgd. selection expression = annulus(28202.298000, 27032.978000, 1490.630043, 2981.260086, X, Y) && !ellipse(31864.078000, 24880.350000, 1409.448041, 1409.448041, 0.000000, X, Y) && !ellipse(31451.027280, 24450.688800, 560.409616, 560.409616, 0.000000, X, Y) && !ellipse(30803.582000, 26830.588800, 1864.704054, 1864.704054, 0.000000, X, Y) && !ellipse(31368.558000, 26751.626600, 1363.144039, 1363.144039, 0.000000, X, Y) && !ellipse(31247.158691, 28092.697144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25005.384400, 27666.207000, 831.960024, 831.960024, 0.000000, X, Y) && !ellipse(23137.260400, 27956.732600, 2490.240072, 319.680809, 10.124100, X, Y)
[Thu Jul 26 18:21:14 2012] Writing fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src13.gif
[Thu Jul 26 18:51:33 2012] Mean detx,y = (75.06, 773.53) 
[Thu Jul 26 18:51:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 18:51:47 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 18:51:47 2012] Setting source spectrum file to fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jul 26 18:51:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jul 26 21:43:34 2012] Updating aperture counts using extracted products
[Thu Jul 26 21:43:34 2012] Error reading totcts from fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jul 26 21:43:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 21:43:35 2012] Using photon index=1.80, rate=0.00706, arf fullrun_mos1_xmm0121500301_pi300-10000_pass1_cl_src13.arf
[Thu Jul 26 21:43:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 21:43:35 2012] Updating source flux to 6.6e-14
[Thu Jul 26 21:43:37 2012] Flag b found in src. 13 procflags, skipping spectral fitting