[Thu Sep  6 05:50:14 2012] Detection parameters:
  Position = (202.9, 196.0) = 7 49 56.67 -67 52 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1522.1 +/- 49.8
  Background counts = 51.9
  Rate = 0.03 +/- 0.001

[Thu Sep  6 05:50:15 2012] Off-axis axis estimate = 10.15'
[Thu Sep  6 05:54:18 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 05:54:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 05:54:18 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Thu Sep  6 05:54:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Thu Sep  6 05:54:18 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.50"
[Thu Sep  6 07:49:01 2012] fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_src7.ximg exists
[Thu Sep  6 07:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_src7.csv
[Thu Sep  6 07:49:02 2012] fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Sep  6 07:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_src7.csv
[Thu Sep  6 07:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:49:03 2012] fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Sep  6 07:49:03 2012] fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Sep  6 07:49:03 2012] Fit fullrun_pn_xmm0118700601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Sep  6 10:06:14 2012] Spatial fit model total counts = 3839.010000, observed total counts = 3683.000000
[Thu Sep  6 10:06:14 2012] Offset between fit and detection position for source 7 = 6.402276 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 6.402276 pixels
  Position = (207.6, 200.4) = 7 49 53.08 -67 52 22.5
  Extent = 19.1 (18.8-19.2)", rotation angle = 0
  Source counts = 3356.9 +/- 57.9
  Background counts = 0.0
  Rate = 0.07 +/- 0.001
 Deleting source due to low signal-to-noise ratio