[Wed Aug  8 06:41:17 2012] Detection parameters:
  Position = (311.2, 296.1) = 7 48 33.59 -67 45 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14728.8 +/- 145.0
  Background counts = 4.7
  Rate = 4 +/- 0.04

[Wed Aug  8 06:41:17 2012] Off-axis axis estimate = 0.94'
[Wed Aug  8 07:40:04 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 07:40:04 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Aug  8 07:40:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Wed Aug  8 07:40:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.90"
[Wed Aug  8 08:02:36 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 08:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 08:02:36 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 08:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 08:02:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 08:02:36 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 08:02:36 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 08:02:36 2012] Fit fullrun_mos1_xmm0118300701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 08:29:46 2012] Spatial fit model total counts = 17023.800000, observed total counts = 17026.000000
[Wed Aug  8 08:29:46 2012] Offset between fit and detection position for source 1 = 0.322367 pixels
[Wed Aug  8 08:29:46 2012] 17059.910000 total counts/ 3890.310000 bgd. counts: snr = 211.144843
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.322367 pixels
  Position = (311.2, 296.5) = 7 48 33.56 -67 45 9.5
  Extent = 9.3 (9.1-9.4)", rotation angle = 0
  Source counts = 13169.6 +/- 130.6
  Background counts = 3890.3
  Rate = 4 +/- 0.04
[Wed Aug  8 08:29:46 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 08:29:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 08:29:46 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 08:29:46 2012] Source does appear to be extended
[Wed Aug  8 08:29:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 10:27:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 10:27:06 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Wed Aug  8 10:27:06 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.899
[Wed Aug  8 10:27:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.29"
[Wed Aug  8 10:49:52 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 10:49:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 10:49:52 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 10:49:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 10:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 10:49:52 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 10:49:52 2012] fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 10:49:52 2012] Fit fullrun_mos1_xmm0118300701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 11:30:16 2012] Spatial fit model total counts = 17671.600000, observed total counts = 17655.000000
[Wed Aug  8 11:30:16 2012] Offset between fit and detection position for source 1 = 0.009743 pixels
[Wed Aug  8 11:30:16 2012] 17719.090000 total counts/ 4086.090000 bgd. counts: snr = 213.273782
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009743 pixels
  Position = (311.2, 296.5) = 7 48 33.55 -67 45 9.5
  Extent = 9.6 (9.4-9.7)", rotation angle = 0
  Source counts = 13633.0 +/- 133.1
  Background counts = 4086.1
  Rate = 4 +/- 0.04
[Wed Aug  8 11:30:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 11:30:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 11:30:16 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 11:30:16 2012] Source does appear to be extended
[Wed Aug  8 11:30:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 11:30:16 2012] Source is confused with source 6
[Wed Aug  8 13:01:28 2012] Counts = 13633.000000, rescaling region sizes by 3.000000
[Wed Aug  8 13:01:28 2012] XMMSAS src. selection expression = ellipse(27029.370000, 25742.838000, 1721.057450, 1721.057450, 0.000000, X, Y)
[Wed Aug  8 13:01:28 2012] Writing source region out to fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 13:01:28 2012] Extracting stamp from image fullrun_mos1_xmm0118300701_pi300-10000_cl_sm2.00.img.gz, (212, 198) - (410, 395)
[Wed Aug  8 13:01:28 2012] XMMSAS bgd. selection expression = annulus(27029.370000, 25742.838000, 8605.287248, 17210.574495, X, Y) && !ellipse(26963.053200, 27274.552000, 1781.824051, 222.728006, 88.965718, X, Y) && !ellipse(27577.244400, 26205.474000, 2215.776064, 758.429622, 228.380000, X, Y)
[Wed Aug  8 13:01:28 2012] Writing fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 13:01:33 2012] Mean detx,y = (-588.63, -564.82) 
[Wed Aug  8 13:01:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 13:10:55 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 13:10:55 2012] Setting source spectrum file to fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 13:10:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 14:16:55 2012] Updating aperture counts using extracted products
[Wed Aug  8 14:16:55 2012] Error reading totcts from fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 14:16:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 14:16:55 2012] Using photon index=1.80, rate=3.8, arf fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 14:16:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 14:16:55 2012] Updating source flux to 3.4e-11
[Wed Aug  8 14:16:57 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Aug  8 14:18:20 2012] Reading fit data from xmm0118300701/analysis//spectral/fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 14:18:20 2012] Spectral fit parameter nH value = 1.02527e+12
[Wed Aug  8 14:18:20 2012] Spectral fit parameter PhoIndex value = 0.456897
[Wed Aug  8 14:18:20 2012] Failed to get F(0.3-8.0) from xmm0118300701/analysis//spectral/fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 14:18:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 14:18:20 2012] Using Nh = 1e+12, photon index=0.46, rate=3.8, arf fullrun_mos1_xmm0118300701_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 14:18:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 14:18:20 2012] Updating source flux to 7e-11