[Thu Sep  6 10:50:29 2012] Detection parameters:
  Position = (311.4, 298.1) = 7 48 33.45 -67 45 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90069.9 +/- 357.3
  Background counts = 42.2
  Rate = 3 +/- 0.01

[Thu Sep  6 10:50:30 2012] Off-axis axis estimate = 0.94'
[Thu Sep  6 13:12:50 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 13:12:50 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Thu Sep  6 13:12:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Thu Sep  6 13:12:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.90"
[Thu Sep  6 15:10:37 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep  6 15:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 15:10:37 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep  6 15:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 15:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 15:10:38 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep  6 15:10:38 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep  6 15:10:38 2012] Fit fullrun_mos2_xmm0117900901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep  6 15:10:59 2012] Spatial fit model total counts = 93297.800000, observed total counts = 93224.000000
[Thu Sep  6 15:10:59 2012] Offset between fit and detection position for source 2 = 0.229834 pixels
[Thu Sep  6 15:10:59 2012] 93413.700000 total counts/ 20062.000000 bgd. counts: snr = 517.872763
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.229834 pixels
  Position = (311.2, 298.3) = 7 48 33.58 -67 45 10.6
  Extent = 8.1 (8.0-8.1)", rotation angle = 0
  Source counts = 73351.7 +/- 305.6
  Background counts = 20062.0
  Rate = 2 +/- 0.009
[Thu Sep  6 15:10:59 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 15:10:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 15:10:59 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 15:10:59 2012] Source does appear to be extended
[Thu Sep  6 15:10:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 15:10:59 2012] Source is confused with source 1
[Thu Sep  6 17:28:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 17:28:46 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Thu Sep  6 17:28:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.130
[Thu Sep  6 17:28:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.06"
[Thu Sep  6 18:32:13 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 18:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 18:32:13 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 18:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 18:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 18:32:13 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 18:32:13 2012] fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 18:32:13 2012] Fit fullrun_mos2_xmm0117900901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep  6 18:32:23 2012] Spatial fit model total counts = 93224.000000, observed total counts = 93224.000000
[Thu Sep  6 18:32:23 2012] Offset between fit and detection position for source 2 = 0.002024 pixels
[Thu Sep  6 18:32:23 2012] 92474.900000 total counts/ 18913.700000 bgd. counts: snr = 534.885170
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002024 pixels
  Position = (311.2, 298.3) = 7 48 33.58 -67 45 10.6
  Extent = 8.1 (8.0-8.1)", rotation angle = 0
  Source counts = 73561.2 +/- 304.1
  Background counts = 18913.7
  Rate = 2 +/- 0.009
[Thu Sep  6 18:32:23 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 18:32:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 18:32:23 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 18:32:23 2012] Source does appear to be extended
[Thu Sep  6 18:32:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 19:55:26 2012] Counts = 73561.200000, rescaling region sizes by 3.000000
[Thu Sep  6 19:55:26 2012] XMMSAS src. selection expression = ellipse(27025.226020, 25903.033800, 1454.612442, 1454.612442, 0.000000, X, Y)
[Thu Sep  6 19:55:26 2012] Writing source region out to fullrun_mos2_xmm0117900901_pi300-10000_pass1_cl_src2_src.reg
[Thu Sep  6 19:55:26 2012] Extracting stamp from image fullrun_mos2_xmm0117900901_pi300-10000_cl_sm2.00.img.gz, (228, 215) - (395, 382)
[Thu Sep  6 19:55:26 2012] XMMSAS bgd. selection expression = annulus(27025.226020, 25903.033800, 7273.062209, 14546.124419, X, Y) && !ellipse(27800.096000, 25708.538000, 1200.808035, 1200.808035, 15.613000, X, Y) && !ellipse(37222.955261, 26410.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.456024, 24655.007690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.738000, 25275.172600, 1276.728037, 691.982420, 17.412200, X, Y) && !ellipse(27067.855835, 24200.440125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37079.687225, 30499.539612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35282.227081, 26393.900543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41420.304352, 25286.952454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25691.135529, 21447.073853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.724800, 23120.690000, 1239.752036, 1239.752036, 0.000000, X, Y) && !ellipse(33226.838806, 35783.098358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29684.522000, 26247.024200, 1252.832036, 1252.832036, 0.000000, X, Y)
[Thu Sep  6 19:55:26 2012] Writing fullrun_mos2_xmm0117900901_pi300-10000_pass1_cl_src2.gif
[Thu Sep  6 19:55:37 2012] Mean detx,y = (509.79, -757.95) 
[Thu Sep  6 19:55:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 19:59:35 2012] grppha failed
[Thu Sep  6 19:59:35 2012] Setting source spectrum file to fullrun_mos2_xmm0117900901_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Sep  6 19:59:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0117900901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Sep  6 20:05:24 2012] Updating aperture counts using extracted products
[Thu Sep  6 20:05:24 2012] Error reading totcts from fullrun_mos2_xmm0117900901_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Sep  6 20:05:24 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 20:05:26 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Sep  6 20:05:26 2012] Source 2 has no response, skipping
[Thu Sep  6 20:05:27 2012] xmm0117900901/analysis//spectral/fullrun_mos2_xmm0117900901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete