[Tue Aug 14 13:08:16 2012] Detection parameters:
  Position = (259.1, 192.9) = 5 41 1.31 -69 28 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.4 +/- 16.5
  Background counts = 22.5
  Rate = 0.01 +/- 0.002

[Tue Aug 14 13:08:17 2012] Off-axis axis estimate = 8.16'
[Tue Aug 14 13:12:30 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:12:30 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Tue Aug 14 13:12:30 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Tue Aug 14 13:12:30 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.51"
[Tue Aug 14 17:40:10 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src31.ximg exists
[Tue Aug 14 17:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src31.csv
[Tue Aug 14 17:40:10 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Aug 14 17:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src31.csv
[Tue Aug 14 17:40:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 17:40:11 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Aug 14 17:40:11 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Aug 14 17:40:11 2012] Fit fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Aug 14 22:03:20 2012] Spatial fit model total counts = 655.219000, observed total counts = 656.000000
[Tue Aug 14 22:03:20 2012] Offset between fit and detection position for source 33 = 0.932402 pixels
[Tue Aug 14 22:03:20 2012] Warning, changing simple spatial fit ID from 31 to 4
[Tue Aug 14 22:03:20 2012] 599.123400 total counts/ 42.561400 bgd. counts: snr = 85.311111
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.932402 pixels
  Position = (258.7, 192.1) = 5 41 1.59 -69 28 24.4
  Extent = 20.3 (18.1-21.5)", rotation angle = 0
  Source counts = 556.6 +/- 24.5
  Background counts = 42.6
  Rate = 0.06 +/- 0.002
[Tue Aug 14 22:03:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:20 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 22:03:20 2012] Source does appear to be extended
[Tue Aug 14 22:03:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:20 2012] Source is confused with source 4
[Tue Aug 14 22:03:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 22:03:42 2012] Initial guess for spatial extent in simple fitting = 20.34"
[Tue Aug 14 22:03:42 2012] source mask rpix=4.7, npix_max = 107, mask sum = 100, frac = 0.933
[Tue Aug 14 22:03:42 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 20.34"
[Wed Aug 15 01:12:58 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_src28.ximg exists
[Wed Aug 15 01:12:58 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Aug 15 01:12:58 2012] Fit fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_src28 appears to have run properly
[Wed Aug 15 01:12:59 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Aug 15 01:12:59 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Aug 15 01:12:59 2012] Fit fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Aug 15 02:58:07 2012] Spatial fit model total counts = 1419.920000, observed total counts = 1406.000000
[Wed Aug 15 02:58:07 2012] Offset between fit and detection position for source 33 = 0.597326 pixels
[Wed Aug 15 02:58:07 2012] 1415.589000 total counts/ 844.006000 bgd. counts: snr = 19.674628
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.597326 pixels
  Position = (258.8, 192.7) = 5 41 1.57 -69 28 21.8
  Extent = 40.7" x 5.9", rotation angle = 299
  Source counts = 571.6 +/- 37.6
  Background counts = 844.0
  Rate = 0.06 +/- 0.004
[Wed Aug 15 02:58:07 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 02:58:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 02:58:07 2012] Assessing source extent using major
[Wed Aug 15 02:58:07 2012] Source does appear to be extended
[Wed Aug 15 02:58:07 2012] Computing asymmetry using major and minor axis, asym = 6.85
[Wed Aug 15 02:58:07 2012] Source is asymmetric
[Wed Aug 15 02:58:25 2012] XMMSAS src. selection expression = ellipse(22463.550335, 16714.147895, 2441.016070, 356.527069, 299.247611, X, Y)
[Wed Aug 15 02:58:25 2012] Writing source region out to fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src33_src.reg
[Wed Aug 15 02:58:25 2012] Extracting stamp from image fullrun_pn_xmm0117730501_pi300-10000_cl_sm2.00.img.gz, (118, 52) - (399, 333)
[Wed Aug 15 02:58:25 2012] XMMSAS bgd. selection expression = annulus(22463.550335, 16714.147895, 4068.360117, 8136.720234, X, Y) && !ellipse(22194.572000, 16219.054000, 1667.240048, 1667.240048, 0.000000, X, Y) && !ellipse(21515.646000, 14934.314000, 1289.640037, 1289.640037, 0.000000, X, Y) && !ellipse(20997.790000, 14129.556000, 2225.160064, 2225.160064, 0.000000, X, Y) && !ellipse(23360.403800, 18427.706200, 1558.824045, 434.863213, 119.025000, X, Y) && !ellipse(21252.063278, 14485.669342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26509.870000, 24535.972000, 1117.056032, 1117.056032, 0.000000, X, Y) && !ellipse(26153.609000, 23712.116000, 1166.176034, 325.040809, 120.967000, X, Y) && !ellipse(25642.874200, 22727.807200, 1641.088047, 409.312012, 117.045000, X, Y) && !ellipse(25492.038989, 22446.976937, 1796.288052, 419.464118, 297.798501, X, Y) && !ellipse(24870.878553, 21311.997982, 1796.288052, 434.785369, 297.799278, X, Y) && !ellipse(24808.617808, 21197.626275, 1796.288052, 434.718576, 297.247047, X, Y) && !ellipse(24487.085964, 20536.604800, 1796.288052, 492.908814, 297.784200, X, Y) && !ellipse(23951.624786, 19576.136699, 1488.384043, 529.573039, 120.065345, X, Y) && !ellipse(23852.171800, 19388.283400, 1488.384043, 516.151215, 118.996100, X, Y) && !ellipse(31318.602400, 12215.525400, 2002.128058, 279.372008, 29.513000, X, Y) && !ellipse(23128.767600, 17963.187900, 1648.448047, 391.981611, 116.738000, X, Y) && !ellipse(22669.029460, 17076.161400, 1648.448047, 475.104014, 119.821000, X, Y) && !ellipse(21772.216000, 15369.598000, 1548.912045, 1548.912045, 0.000000, X, Y) && !ellipse(29610.057007, 13220.859848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28710.466705, 13070.678116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.952000, 12827.984000, 2281.504066, 2281.504066, 0.000000, X, Y) && !ellipse(30394.873047, 13120.530273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.468170, 12833.347702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26891.468964, 25015.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.250519, 25646.759369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24767.271800, 17624.382000, 1575.096045, 1575.096045, 0.000000, X, Y) && !ellipse(27914.831800, 14982.598400, 1575.096045, 220.549606, 337.728519, X, Y)
[Wed Aug 15 02:58:25 2012] Writing fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src33.gif
[Wed Aug 15 03:24:12 2012] Mean detx,y = (212.43, 11246.35) 
[Wed Aug 15 03:24:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 03:25:34 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 03:25:34 2012] Setting source spectrum file to fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Aug 15 03:25:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Aug 15 07:01:27 2012] Updating aperture counts using extracted products
[Wed Aug 15 07:01:27 2012] Error reading totcts from fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Aug 15 07:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:01:28 2012] Using photon index=1.80, rate=0.0572, arf fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src33.arf
[Wed Aug 15 07:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:01:28 2012] Updating source flux to 2.8e-13
[Wed Aug 15 07:04:28 2012] Flag c found in src. 33 procflags, skipping spectral fitting