[Tue Aug 14 13:08:14 2012] Detection parameters:
  Position = (460.1, 258.1) = 5 38 15.52 -69 23 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2993.7 +/- 65.9
  Background counts = 25.8
  Rate = 0.3 +/- 0.007

[Tue Aug 14 13:08:17 2012] Off-axis axis estimate = 12.08'
[Tue Aug 14 13:12:30 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:12:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 13:12:30 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Tue Aug 14 13:12:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Tue Aug 14 13:12:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.47"
[Tue Aug 14 17:40:09 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 17:40:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 17:40:09 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 17:40:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 17:40:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 17:40:10 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 17:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 14 17:40:10 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 17:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 14 17:40:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:20 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.492775 pixels away
[Tue Aug 14 22:03:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:20 2012] Assessing source extent using major
[Tue Aug 14 22:03:20 2012] Source does appear to be extended
[Tue Aug 14 22:03:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:42 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 22:03:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 22:03:42 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Tue Aug 14 22:03:42 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Tue Aug 14 22:03:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.47"
[Wed Aug 15 01:12:57 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 01:12:57 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 01:12:57 2012] Fit fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Aug 15 01:12:58 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 01:12:58 2012] fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 01:12:58 2012] Fit fullrun_pn_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 02:58:07 2012] Spatial fit model total counts = 3549.270000, observed total counts = 3334.000000
[Wed Aug 15 02:58:07 2012] Offset between fit and detection position for source 1 = 0.285871 pixels
[Wed Aug 15 02:58:07 2012] 3534.220000 total counts/ 1265.540000 bgd. counts: snr = 63.772773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.285871 pixels
  Position = (459.9, 258.3) = 5 38 15.72 -69 23 33.5
  Extent = 6.5 (6.3-6.8)", rotation angle = 0
  Source counts = 2268.7 +/- 59.4
  Background counts = 1265.5
  Rate = 0.2 +/- 0.006
[Wed Aug 15 02:58:07 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 02:58:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 02:58:07 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 02:58:07 2012] Source does appear to be extended
[Wed Aug 15 02:58:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:58:24 2012] Counts = 2268.680000, rescaling region sizes by 2.000000
[Wed Aug 15 02:58:24 2012] XMMSAS src. selection expression = ellipse(39962.510800, 22420.479400, 784.110023, 784.110023, 0.000000, X, Y)
[Wed Aug 15 02:58:24 2012] Writing source region out to fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 02:58:24 2012] Extracting stamp from image fullrun_pn_xmm0117730501_pi300-10000_cl_sm2.00.img.gz, (415, 213) - (505, 303)
[Wed Aug 15 02:58:24 2012] XMMSAS bgd. selection expression = annulus(39962.510800, 22420.479400, 2613.700075, 5227.400150, X, Y) && !ellipse(33901.038361, 24117.656311, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 02:58:24 2012] Writing fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 02:58:35 2012] Mean detx,y = (12973.53, -2017.38) 
[Wed Aug 15 02:58:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 02:59:35 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 02:59:35 2012] Setting source spectrum file to fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 02:59:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 07:01:27 2012] Updating aperture counts using extracted products
[Wed Aug 15 07:01:27 2012] Error reading totcts from fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 07:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:01:28 2012] Using photon index=1.80, rate=0.227, arf fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 07:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:01:28 2012] Updating source flux to 1.2e-12
[Wed Aug 15 07:08:02 2012] Reading fit data from xmm0117730501/analysis//spectral/fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 15 07:08:02 2012] Spectral fit parameter nH value = 5.98151e+21
[Wed Aug 15 07:08:02 2012] Spectral fit parameter PhoIndex value = 6.64605
[Wed Aug 15 07:08:02 2012] Failed to get F(0.3-8.0) from xmm0117730501/analysis//spectral/fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 15 07:08:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:08:02 2012] Using Nh = 6e+21, photon index=6.65, rate=0.227, arf fullrun_pn_xmm0117730501_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 07:08:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:08:02 2012] Updating source flux to 6.5e-13