[Tue Aug 14 13:09:48 2012] Detection parameters:
  Position = (352.7, 132.9) = 5 39 43.76 -69 32 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.8 +/- 13.5
  Background counts = 4.9
  Rate = 0.01 +/- 0.001

[Tue Aug 14 13:09:49 2012] Off-axis axis estimate = 12.63'
[Tue Aug 14 21:06:37 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 21:06:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 21:06:37 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Tue Aug 14 21:06:37 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Tue Aug 14 21:06:37 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.74"
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src4.ximg exists
[Tue Aug 14 22:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src4.csv
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Aug 14 22:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src4.csv
[Tue Aug 14 22:03:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Aug 14 22:03:06 2012] Fit fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Aug 14 22:03:33 2012] Spatial fit model total counts = 198.865000, observed total counts = 200.000000
[Tue Aug 14 22:03:33 2012] Offset between fit and detection position for source 4 = 1.092219 pixels
[Tue Aug 14 22:03:33 2012] 193.217100 total counts/ 98.016100 bgd. counts: snr = 9.615963
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.092219 pixels
  Position = (353.7, 132.9) = 5 39 42.86 -69 32 41.6
  Extent = 9.2 (7.8-10.9)", rotation angle = 0
  Source counts = 95.2 +/- 13.9
  Background counts = 98.0
  Rate = 0.01 +/- 0.001
[Tue Aug 14 22:03:33 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:33 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 22:03:33 2012] Source does appear to be extended
[Tue Aug 14 22:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:41:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:41:20 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Wed Aug 15 02:41:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.101
[Wed Aug 15 02:41:20 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.18"
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src4.ximg exists
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Aug 15 02:57:56 2012] Fit fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Aug 15 02:57:56 2012] Fit fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Aug 15 02:58:13 2012] Spatial fit model total counts = 172.796000, observed total counts = 173.000000
[Wed Aug 15 02:58:13 2012] Offset between fit and detection position for source 4 = 0.182777 pixels
[Wed Aug 15 02:58:13 2012] 176.422900 total counts/ 81.346300 bgd. counts: snr = 10.541556
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.182777 pixels
  Position = (353.7, 133.1) = 5 39 42.94 -69 32 40.9
  Extent = 10.8 (8.7-13.5)" x 7.3 (5.8-9.4)", rotation angle = 1 (336-28) degrees
  Source counts = 95.1 +/- 13.3
  Background counts = 81.3
  Rate = 0.01 +/- 0.001
[Wed Aug 15 02:58:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 02:58:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 02:58:13 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 02:58:13 2012] Source does appear to be extended
[Wed Aug 15 02:58:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Wed Aug 15 06:38:16 2012] XMMSAS src. selection expression = ellipse(30719.747000, 11527.788000, 645.924019, 440.830813, 0.522702, X, Y)
[Wed Aug 15 06:38:16 2012] Writing source region out to fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 15 06:38:16 2012] Extracting stamp from image fullrun_mos2_xmm0117730501_pi300-10000_cl_sm2.00.img.gz, (317, 96) - (391, 170)
[Wed Aug 15 06:38:16 2012] XMMSAS bgd. selection expression = annulus(30719.747000, 11527.788000, 1076.540031, 2153.080062, X, Y) && !ellipse(31827.170400, 10804.365000, 734.167221, 734.167221, 0.000000, X, Y) && !ellipse(29427.148000, 11783.954000, 681.976820, 681.976820, 0.000000, X, Y)
[Wed Aug 15 06:38:16 2012] Writing fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src4.gif
[Wed Aug 15 06:44:55 2012] Mean detx,y = (-9913.97, -11966.20) 
[Wed Aug 15 06:44:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 06:45:10 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 06:45:10 2012] Setting source spectrum file to fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 15 06:45:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 15 06:51:29 2012] Not generating rmf since there are only 95 counts
[Wed Aug 15 06:51:29 2012] rmf not generated due to insufficient counts
[Wed Aug 15 07:01:29 2012] Updating aperture counts using extracted products
[Wed Aug 15 07:01:29 2012] Error reading totcts from fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 15 07:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:01:29 2012] Using photon index=1.80, rate=0.00952, arf fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src4.arf
[Wed Aug 15 07:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:01:29 2012] Updating source flux to 2.4e-13
[Wed Aug 15 07:03:55 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting