[Tue Aug 14 13:09:48 2012] Detection parameters:
  Position = (320.7, 309.0) = 5 40 10.47 -69 19 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24308.5 +/- 183.5
  Background counts = 18.1
  Rate = 3 +/- 0.02

[Tue Aug 14 13:09:49 2012] Off-axis axis estimate = 1.79'
[Tue Aug 14 21:06:37 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 21:06:37 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Aug 14 21:06:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Aug 14 21:06:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 22:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 22:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 22:03:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 22:03:06 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 22:03:06 2012] Fit fullrun_mos2_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 14 22:03:33 2012] Spatial fit model total counts = 23642.500000, observed total counts = 23333.000000
[Tue Aug 14 22:03:33 2012] Offset between fit and detection position for source 2 = 0.154680 pixels
[Tue Aug 14 22:03:33 2012] 23678.790000 total counts/ 5973.790000 bgd. counts: snr = 229.071445
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.154680 pixels
  Position = (320.5, 308.9) = 5 40 10.60 -69 19 56.1
  Extent = 6.4 (6.3-6.4)", rotation angle = 0
  Source counts = 17705.0 +/- 153.9
  Background counts = 5973.8
  Rate = 2 +/- 0.02
[Tue Aug 14 22:03:33 2012] Spatial fit model total counts = 10644.800000, observed total counts = 20917.000000
[Tue Aug 14 22:03:33 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 22:03:33 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:33 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 22:03:33 2012] Source does appear to be extended
[Tue Aug 14 22:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:33 2012] Source is confused with source 6
[Wed Aug 15 02:41:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:41:20 2012] Initial guess for spatial extent in simple fitting = 6.36"
[Wed Aug 15 02:41:20 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.039
[Wed Aug 15 02:41:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.36"
[Wed Aug 15 02:57:55 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 02:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 02:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 02:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 02:57:56 2012] fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 02:57:56 2012] Fit fullrun_mos2_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 02:58:13 2012] Spatial fit model total counts = 23646.200000, observed total counts = 23333.000000
[Wed Aug 15 02:58:13 2012] Offset between fit and detection position for source 2 = 0.000466 pixels
[Wed Aug 15 02:58:13 2012] 23681.760000 total counts/ 5959.460000 bgd. counts: snr = 229.570790
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000466 pixels
  Position = (320.5, 308.9) = 5 40 10.60 -69 19 56.1
  Extent = 6.4 (6.3-6.4)", rotation angle = 0
  Source counts = 17722.3 +/- 153.9
  Background counts = 5959.5
  Rate = 2 +/- 0.02
[Wed Aug 15 02:58:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 02:58:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 02:58:13 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 02:58:13 2012] Source does appear to be extended
[Wed Aug 15 02:58:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:38:16 2012] Counts = 17722.300000, rescaling region sizes by 3.000000
[Wed Aug 15 06:38:16 2012] XMMSAS src. selection expression = ellipse(27838.666600, 26829.856000, 1144.117833, 1144.117833, 0.000000, X, Y)
[Wed Aug 15 06:38:16 2012] Writing source region out to fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug 15 06:38:16 2012] Extracting stamp from image fullrun_mos2_xmm0117730501_pi300-10000_cl_sm2.00.img.gz, (255, 243) - (386, 375)
[Wed Aug 15 06:38:16 2012] XMMSAS bgd. selection expression = annulus(27838.666600, 26829.856000, 5720.589165, 11441.178329, X, Y) && !ellipse(40001.581482, 22399.629333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28362.113586, 26455.244995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36368.108800, 39699.958000, 2178.064063, 2178.064063, 0.000000, X, Y)
[Wed Aug 15 06:38:16 2012] Writing fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2.gif
[Wed Aug 15 06:38:20 2012] Mean detx,y = (-62.00, 85.01) 
[Wed Aug 15 06:38:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 06:42:23 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 06:42:23 2012] Setting source spectrum file to fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug 15 06:42:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Aug 15 07:01:29 2012] Updating aperture counts using extracted products
[Wed Aug 15 07:01:29 2012] Error reading totcts from fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug 15 07:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:01:29 2012] Using photon index=1.80, rate=1.77, arf fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2.arf
[Wed Aug 15 07:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:01:29 2012] Updating source flux to 1.8e-11
[Wed Aug 15 07:03:55 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Wed Aug 15 07:03:55 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Aug 15 07:04:28 2012] Reading fit data from xmm0117730501/analysis//spectral/fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2_pl.csv
[Wed Aug 15 07:04:28 2012] Spectral fit parameter nH value = 4.33999e+21
[Wed Aug 15 07:04:28 2012] Spectral fit parameter PhoIndex value = 2.01269
[Wed Aug 15 07:04:28 2012] Failed to get F(0.3-8.0) from xmm0117730501/analysis//spectral/fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Aug 15 07:04:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:04:28 2012] Using Nh = 4.3e+21, photon index=2.01, rate=1.77, arf fullrun_mos2_xmm0117730501_pi300-10000_pass1_cl_src2.arf
[Wed Aug 15 07:04:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:04:28 2012] Updating source flux to 2.2e-11