[Tue Aug 14 13:09:05 2012] Detection parameters:
  Position = (381.9, 127.8) = 5 39 19.51 -69 33 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.3 +/- 9.8
  Background counts = 8.5
  Rate = 0.003 +/- 0.0007

[Tue Aug 14 13:09:05 2012] Off-axis axis estimate = 13.77'
[Tue Aug 14 17:40:12 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 17:40:12 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Tue Aug 14 17:40:12 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.966
[Tue Aug 14 17:40:12 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 13.31"
[Tue Aug 14 21:06:35 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src30.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src30.csv
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src30.csv
[Tue Aug 14 21:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue Aug 14 21:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:30 2012] Warning, spatial fit 30 centroid is now closest to src. 33
[Tue Aug 14 22:03:30 2012] Source 42 is offset by 0.997527 and 1.954878 pixels which is larger than
2 X fitted extent = 1.517228 x 1.517228, not incorporating fit results
[Tue Aug 14 22:03:30 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:30 2012] Assessing source extent using major
[Tue Aug 14 22:03:30 2012] Source does appear to be extended
[Tue Aug 14 22:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:30 2012] Deleting source due to low Poisson probability 0.9