[Tue Aug 14 13:09:05 2012] Detection parameters:
  Position = (368.4, 119.3) = 5 39 30.67 -69 33 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.1 +/- 7.7
  Background counts = 6.6
  Rate = 0.002 +/- 0.0005

[Tue Aug 14 13:09:05 2012] Off-axis axis estimate = 13.94'
[Tue Aug 14 17:40:12 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 17:40:12 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Tue Aug 14 17:40:12 2012] source mask rpix=3.1, npix_max = 51, mask sum = 39, frac = 0.761
[Tue Aug 14 17:40:12 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 13.40"
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src42.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src42.csv
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src42.csv
[Tue Aug 14 21:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 21:06:37 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Aug 14 21:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Aug 14 21:06:37 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Aug 14 21:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Aug 14 21:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:30 2012] Source 37 is offset by -0.611172 and 5.328053 pixels which is larger than
2 X fitted extent = 1.499025 x 1.499025, not incorporating fit results
[Tue Aug 14 22:03:30 2012] Warning, spatial fit 42 centroid is now closest to src. 3
[Tue Aug 14 22:03:30 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:30 2012] Assessing source extent using major
[Tue Aug 14 22:03:30 2012] Source does appear to be extended
[Tue Aug 14 22:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:30 2012] Deleting source due to low Poisson probability 0.9