[Tue Aug 14 13:09:04 2012] Detection parameters:
  Position = (326.2, 140.2) = 5 40 5.74 -69 32 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 11.8
  Background counts = 7.2
  Rate = 0.006 +/- 0.0008

[Tue Aug 14 13:09:05 2012] Off-axis axis estimate = 11.65'
[Tue Aug 14 17:40:12 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 17:40:12 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Tue Aug 14 17:40:12 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.114
[Tue Aug 14 17:40:12 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.25"
[Tue Aug 14 21:06:35 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 14 21:06:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 14 21:06:35 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 14 21:06:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 14 21:06:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 14 21:06:36 2012] Fit fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Aug 14 22:03:30 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 14.511889 pixels away
[Tue Aug 14 22:03:30 2012] Spatial fit model total counts = 126.045000, observed total counts = 122.000000
[Tue Aug 14 22:03:30 2012] Offset between fit and detection position for source 35 = 0.255125 pixels
[Tue Aug 14 22:03:30 2012] 129.521900 total counts/ 59.971800 bgd. counts: snr = 8.980990
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.255125 pixels
  Position = (325.9, 140.2) = 5 40 5.95 -69 32 10.2
  Extent = 7.0 (5.7-8.8)", rotation angle = 0
  Source counts = 69.6 +/- 11.4
  Background counts = 60.0
  Rate = 0.005 +/- 0.0008
[Tue Aug 14 22:03:30 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:30 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 22:03:30 2012] Source does appear to be extended
[Tue Aug 14 22:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 01:12:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 01:12:59 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Wed Aug 15 01:12:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905
[Wed Aug 15 01:12:59 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 6.97"
[Wed Aug 15 02:41:19 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_src8.ximg exists
[Wed Aug 15 02:41:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_src8.csv
[Wed Aug 15 02:41:19 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Aug 15 02:41:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_src8.csv
[Wed Aug 15 02:41:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:41:19 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Aug 15 02:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Aug 15 02:41:19 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Aug 15 02:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Aug 15 02:41:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:58:12 2012] Warning, spatial fit 8 centroid is now closest to src. 36
[Wed Aug 15 02:58:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 02:58:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 02:58:12 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 02:58:12 2012] Source does appear to be extended
[Wed Aug 15 02:58:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 05:45:00 2012] XMMSAS src. selection expression = ellipse(28307.595400, 12147.045200, 418.266012, 418.266012, 0.000000, X, Y)
[Wed Aug 15 05:45:00 2012] Writing source region out to fullrun_mos1_xmm0117730501_pi300-10000_pass1_cl_src35_src.reg
[Wed Aug 15 05:45:00 2012] Extracting stamp from image fullrun_mos1_xmm0117730501_pi300-10000_cl_sm2.00.img.gz, (302, 116) - (350, 164)
[Wed Aug 15 05:45:00 2012] XMMSAS bgd. selection expression = annulus(28307.595400, 12147.045200, 697.110020, 1394.220040, X, Y) && !ellipse(30015.957400, 11129.805400, 573.548017, 573.548017, 0.000000, X, Y) && !ellipse(26276.866852, 11786.680725, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 05:45:00 2012] Writing fullrun_mos1_xmm0117730501_pi300-10000_pass1_cl_src35.gif
[Wed Aug 15 05:51:58 2012] Mean detx,y = (-12395.94, 7262.68) 
[Wed Aug 15 05:51:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 05:52:23 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 05:52:24 2012] Setting source spectrum file to fullrun_mos1_xmm0117730501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed Aug 15 05:52:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0117730501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed Aug 15 06:23:52 2012] Not generating rmf since there are only 69 counts
[Wed Aug 15 06:23:52 2012] rmf not generated due to insufficient counts
[Wed Aug 15 07:01:29 2012] Updating aperture counts using extracted products
[Wed Aug 15 07:01:29 2012] Error reading totcts from fullrun_mos1_xmm0117730501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed Aug 15 07:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 07:01:29 2012] Using photon index=1.80, rate=0.00497, arf fullrun_mos1_xmm0117730501_pi300-10000_pass1_cl_src35.arf
[Wed Aug 15 07:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 07:01:29 2012] Updating source flux to 1.2e-13
[Wed Aug 15 07:01:31 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting