[Tue Aug 14 13:09:04 2012] Detection parameters:
  Position = (335.0, 168.9) = 5 39 58.49 -69 30 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.4 +/- 9.2
  Background counts = 6.2
  Rate = 0.003 +/- 0.0007

[Tue Aug 14 13:09:05 2012] Off-axis axis estimate = 9.76'
[Tue Aug 14 17:40:12 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 17:40:12 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Tue Aug 14 17:40:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.833
[Tue Aug 14 17:40:12 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 11.31"
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src35.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src35.csv
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src35.csv
[Tue Aug 14 21:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 21:06:37 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Aug 14 21:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Aug 14 21:06:37 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Aug 14 21:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Aug 14 21:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:30 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.965998 pixels away
[Tue Aug 14 22:03:30 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:30 2012] Assessing source extent using major
[Tue Aug 14 22:03:30 2012] Source does appear to be extended
[Tue Aug 14 22:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:30 2012] Deleting source due to low Poisson probability 0.9