[Tue Aug 14 13:09:03 2012] Detection parameters:
  Position = (254.7, 247.0) = 5 41 4.81 -69 24 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.3 +/- 9.2
  Background counts = 12.5
  Rate = 0.005 +/- 0.001

[Tue Aug 14 13:09:05 2012] Off-axis axis estimate = 4.90'
[Tue Aug 14 17:40:12 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 17:40:12 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Tue Aug 14 17:40:12 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.162
[Tue Aug 14 17:40:12 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.88"
[Tue Aug 14 21:06:35 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src18.ximg exists
[Tue Aug 14 21:06:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src18.csv
[Tue Aug 14 21:06:35 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Aug 14 21:06:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src18.csv
[Tue Aug 14 21:06:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Aug 14 21:06:36 2012] fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Aug 14 21:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Aug 14 21:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117730501_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 22:03:30 2012] Spatial fit model total counts = 158.331000, observed total counts = 136.000000
[Tue Aug 14 22:03:30 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 22:03:30 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 22:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 22:03:30 2012] Assessing source extent using major
[Tue Aug 14 22:03:30 2012] Source does appear to be extended
[Tue Aug 14 22:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 22:03:30 2012] Deleting source due to low Poisson probability 0.9