[Thu May 31 19:36:22 2012] Detection parameters:
  Position = (298.7, 266.1) = 5 40 32.69 -69 22 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.2 +/- 18.9
  Background counts = 55.7
  Rate = 0.02 +/- 0.002

[Thu May 31 19:36:22 2012] Off-axis axis estimate = 2.34'
[Thu May 31 19:38:07 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:38:07 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Thu May 31 19:38:07 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Thu May 31 19:38:07 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.60"
[Thu May 31 21:59:07 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src45.ximg exists
[Thu May 31 21:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src45.csv
[Thu May 31 21:59:07 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu May 31 21:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src45.csv
[Thu May 31 21:59:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:59:08 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu May 31 21:59:08 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu May 31 21:59:08 2012] Fit fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu May 31 22:52:59 2012] Source 46 is offset by -3.419828 and -5.035682 pixels which is larger than
2 X fitted extent = 2.616083 x 7.408414, not incorporating fit results
[Thu May 31 22:52:59 2012] Warning, spatial fit 45 centroid is now closest to src. 47
[Thu May 31 22:52:59 2012] Spatial fit model total counts = 836.071000, observed total counts = 834.000000
[Thu May 31 22:52:59 2012] Offset between fit and detection position for source 46 = 1.691986 pixels
[Thu May 31 22:52:59 2012] Warning, changing simple spatial fit ID from 45 to 46
[Thu May 31 22:52:59 2012] 831.948000 total counts/ 611.078000 bgd. counts: snr = 8.934873
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.691986 pixels
  Position = (297.7, 264.8) = 5 40 33.56 -69 22 52.9
  Extent = 16.1" x 3.9", rotation angle = 305
  Source counts = 220.9 +/- 28.8
  Background counts = 611.1
  Rate = 0.02 +/- 0.003
[Thu May 31 22:52:59 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:52:59 2012] Assessing source extent using major
[Thu May 31 22:52:59 2012] Source does appear to be extended
[Thu May 31 22:52:59 2012] Computing asymmetry using major and minor axis, asym = 4.16
[Thu May 31 22:52:59 2012] Source is asymmetric
[Thu May 31 22:52:59 2012] Source is confused with source 47
[Thu May 31 22:53:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 22:53:12 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Thu May 31 22:53:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.958
[Thu May 31 22:53:12 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.00"
[Fri Jun  1 01:35:43 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun  1 01:35:43 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun  1 01:35:43 2012] Fit fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src31 appears to have run properly
[Fri Jun  1 01:35:44 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun  1 01:35:44 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun  1 01:35:44 2012] Fit fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Jun  1 02:15:52 2012] Spatial fit model total counts = 838.692000, observed total counts = 857.000000
[Fri Jun  1 02:15:52 2012] Offset between fit and detection position for source 46 = 1.302885 pixels
[Fri Jun  1 02:15:52 2012] 849.532000 total counts/ 520.799000 bgd. counts: snr = 14.404833
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.302885 pixels
  Position = (297.1, 263.6) = 5 40 34.01 -69 22 58.0
  Extent = 35.9" x 4.5", rotation angle = 124
  Source counts = 328.7 +/- 29.1
  Background counts = 520.8
  Rate = 0.03 +/- 0.003
[Fri Jun  1 02:15:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:15:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:15:52 2012] Assessing source extent using major
[Fri Jun  1 02:15:52 2012] Source does appear to be extended
[Fri Jun  1 02:15:52 2012] Computing asymmetry using major and minor axis, asym = 8.00
[Fri Jun  1 02:15:52 2012] Source is asymmetric
[Fri Jun  1 02:16:04 2012] XMMSAS src. selection expression = ellipse(25800.133487, 22887.337477, 2152.584062, 269.073008, 123.973787, X, Y)
[Fri Jun  1 02:16:04 2012] Writing source region out to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src46_src.reg
[Fri Jun  1 02:16:04 2012] Extracting stamp from image fullrun_pn_xmm0117510201_pi300-10000_cl_sm2.00.img.gz, (173, 140) - (421, 387)
[Fri Jun  1 02:16:04 2012] XMMSAS bgd. selection expression = annulus(25800.133487, 22887.337477, 3587.640103, 7175.280206, X, Y) && !ellipse(28252.339800, 26526.050200, 1487.008843, 1487.008843, 0.000000, X, Y) && !ellipse(22279.760000, 17620.538000, 1492.992043, 1492.992043, 0.000000, X, Y) && !ellipse(21741.846000, 16809.606000, 2786.744080, 2786.744080, 0.000000, X, Y) && !ellipse(23471.752000, 19402.534000, 2456.752071, 2456.752071, 0.000000, X, Y) && !ellipse(22795.160000, 18384.136000, 1537.624044, 1537.624044, 0.000000, X, Y) && !ellipse(21865.753600, 17037.073400, 1694.352049, 448.236013, 123.407100, X, Y) && !ellipse(21267.624000, 16090.774000, 1580.200045, 1580.200045, 0.000000, X, Y) && !ellipse(28578.349792, 29728.173950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28722.908173, 27615.229950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24650.547241, 27100.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19391.778503, 26866.705505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.061554, 25974.225372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22982.304718, 25579.592438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.052000, 25308.802000, 1138.416033, 1138.416033, 0.000000, X, Y) && !ellipse(26782.219818, 24398.807983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.684000, 23912.986000, 1143.104033, 1143.104033, 0.000000, X, Y) && !ellipse(29145.512800, 23771.124300, 843.200024, 843.200024, 0.000000, X, Y) && !ellipse(25589.130000, 22641.836000, 1215.912035, 1215.912035, 0.000000, X, Y) && !ellipse(25167.514000, 21971.846000, 1549.128045, 1549.128045, 0.000000, X, Y) && !ellipse(24253.450145, 20603.994796, 2870.112083, 489.947764, 123.595227, X, Y) && !ellipse(24459.873400, 20920.272000, 1354.688039, 436.767213, 306.336900, X, Y) && !ellipse(24034.326000, 20300.626000, 1378.272040, 1378.272040, 0.000000, X, Y) && !ellipse(32868.068000, 17321.677000, 1783.680051, 967.696028, 14.676820, X, Y)
[Fri Jun  1 02:16:04 2012] Writing fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src46.gif
[Fri Jun  1 02:52:48 2012] Mean detx,y = (392.84, 4121.57) 
[Fri Jun  1 02:52:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 02:54:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 02:54:47 2012] Setting source spectrum file to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Jun  1 02:54:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri Jun  1 05:25:55 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:25:55 2012] Error reading totcts from fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Jun  1 05:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:25:55 2012] Using photon index=1.80, rate=0.0319, arf fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src46.arf
[Fri Jun  1 05:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:25:55 2012] Updating source flux to 9.7e-14
[Fri Jun  1 05:26:29 2012] Flag b found in src. 46 procflags, skipping spectral fitting
[Fri Jun  1 05:26:29 2012] Flag c found in src. 46 procflags, skipping spectral fitting