[Thu May 31 19:36:22 2012] Detection parameters:
  Position = (308.4, 281.0) = 5 40 24.72 -69 21 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.8 +/- 19.1
  Background counts = 61.3
  Rate = 0.02 +/- 0.002

[Thu May 31 19:36:22 2012] Off-axis axis estimate = 1.46'
[Thu May 31 19:38:07 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:38:07 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Thu May 31 19:38:07 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.087
[Thu May 31 19:38:07 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.16"
[Thu May 31 21:59:07 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 31 21:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src40.csv
[Thu May 31 21:59:07 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 31 21:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src40.csv
[Thu May 31 21:59:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:59:08 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 31 21:59:08 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 31 21:59:08 2012] Fit fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Thu May 31 22:52:59 2012] Warning, spatial fit 40 centroid is now closest to src. 44
[Thu May 31 22:52:59 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:52:59 2012] Assessing source extent using major
[Thu May 31 22:52:59 2012] Source does appear to be extended
[Thu May 31 22:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:52:59 2012] Source is confused with source 44
[Thu May 31 22:53:12 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Thu May 31 22:53:12 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Thu May 31 22:53:12 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.087
[Thu May 31 22:53:12 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.16"
[Fri Jun  1 01:35:43 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun  1 01:35:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src27.csv
[Fri Jun  1 01:35:43 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun  1 01:35:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src27.csv
[Fri Jun  1 01:35:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 01:35:44 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun  1 01:35:44 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun  1 01:35:44 2012] Fit fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jun  1 02:15:52 2012] Spatial fit model total counts = 2691.640000, observed total counts = 4642.000000
[Fri Jun  1 02:15:52 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  1 02:15:52 2012] Warning, spatial fit 27 centroid is now closest to src. 44
[Fri Jun  1 02:15:52 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 16.335563 pixels away
[Fri Jun  1 02:15:52 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 20.886285 pixels away
[Fri Jun  1 02:15:52 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 42.184347 pixels away
[Fri Jun  1 02:15:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:15:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:15:52 2012] Assessing source extent using major
[Fri Jun  1 02:15:52 2012] Source does appear to be extended
[Fri Jun  1 02:15:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:16:04 2012] XMMSAS src. selection expression = ellipse(26782.219818, 24398.807983, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 02:16:04 2012] Writing source region out to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src41_src.reg
[Fri Jun  1 02:16:04 2012] Extracting stamp from image fullrun_pn_xmm0117510201_pi300-10000_cl_sm2.00.img.gz, (271, 244) - (346, 319)
[Fri Jun  1 02:16:04 2012] XMMSAS bgd. selection expression = annulus(26782.219818, 24398.807983, 1087.500000, 2175.000000, X, Y) && !ellipse(28252.339800, 26526.050200, 1487.008843, 1487.008843, 0.000000, X, Y) && !ellipse(24650.547241, 27100.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.052000, 25308.802000, 1138.416033, 1138.416033, 0.000000, X, Y) && !ellipse(26456.684000, 23912.986000, 1143.104033, 1143.104033, 0.000000, X, Y) && !ellipse(29145.512800, 23771.124300, 843.200024, 843.200024, 0.000000, X, Y) && !ellipse(25800.133487, 22887.337477, 2870.112083, 358.764010, 123.973787, X, Y) && !ellipse(25589.130000, 22641.836000, 1215.912035, 1215.912035, 0.000000, X, Y) && !ellipse(25167.514000, 21971.846000, 1549.128045, 1549.128045, 0.000000, X, Y) && !ellipse(24253.450145, 20603.994796, 2870.112083, 489.947764, 123.595227, X, Y) && !ellipse(24459.873400, 20920.272000, 1354.688039, 436.767213, 306.336900, X, Y)
[Fri Jun  1 02:16:04 2012] Writing fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src41.gif
[Fri Jun  1 02:50:27 2012] Mean detx,y = (336.37, 2278.39) 
[Fri Jun  1 02:50:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 02:50:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 02:50:45 2012] Setting source spectrum file to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jun  1 02:50:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Jun  1 04:24:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 04:24:02 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:25:55 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:25:55 2012] Error reading totcts from fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jun  1 05:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:25:55 2012] Using photon index=1.80, rate=0.0153, arf fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src41.arf
[Fri Jun  1 05:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:25:55 2012] Updating source flux to 4e-14
[Fri Jun  1 05:26:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting