[Thu May 31 19:36:21 2012] Detection parameters:
  Position = (232.9, 168.1) = 5 41 27.22 -69 29 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.4 +/- 17.8
  Background counts = 23.3
  Rate = 0.02 +/- 0.002

[Thu May 31 19:36:22 2012] Off-axis axis estimate = 10.58'
[Thu May 31 19:38:07 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:38:07 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Thu May 31 19:38:07 2012] source mask rpix=2.7, npix_max = 40, mask sum = 35, frac = 0.858
[Thu May 31 19:38:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.72"
[Thu May 31 21:59:06 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 31 21:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src2.csv
[Thu May 31 21:59:06 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 31 21:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src2.csv
[Thu May 31 21:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:59:07 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 31 21:59:07 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 31 21:59:07 2012] Fit fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 31 22:52:59 2012] Spatial fit model total counts = 496.906000, observed total counts = 465.000000
[Thu May 31 22:52:59 2012] Offset between fit and detection position for source 2 = 0.211598 pixels
[Thu May 31 22:52:59 2012] 526.251000 total counts/ 379.482000 bgd. counts: snr = 7.534228
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.211598 pixels
  Position = (232.7, 167.9) = 5 41 27.31 -69 29 53.7
  Extent = 8.6 (6.8-11.2)", rotation angle = 0
  Source counts = 146.8 +/- 22.9
  Background counts = 379.5
  Rate = 0.01 +/- 0.002
[Thu May 31 22:52:59 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:52:59 2012] Assessing source extent using major axis lower bound
[Thu May 31 22:52:59 2012] Source does appear to be extended
[Thu May 31 22:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:53:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 22:53:12 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Thu May 31 22:53:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.978
[Thu May 31 22:53:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.60"
[Fri Jun  1 01:35:42 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  1 01:35:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 01:35:42 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  1 01:35:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 01:35:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 01:35:44 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  1 01:35:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  1 01:35:44 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  1 01:35:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  1 01:35:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:15:52 2012] Warning, spatial fit 2 centroid is now closest to src. 8
[Fri Jun  1 02:15:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:15:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:15:52 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 02:15:52 2012] Source does appear to be extended
[Fri Jun  1 02:15:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:16:03 2012] XMMSAS src. selection expression = ellipse(20200.266800, 14561.931200, 516.066615, 516.066615, 0.000000, X, Y)
[Fri Jun  1 02:16:03 2012] Writing source region out to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 02:16:03 2012] Extracting stamp from image fullrun_pn_xmm0117510201_pi300-10000_cl_sm2.00.img.gz, (203, 138) - (262, 198)
[Fri Jun  1 02:16:03 2012] XMMSAS bgd. selection expression = annulus(20200.266800, 14561.931200, 860.111025, 1720.222049, X, Y) && !ellipse(22279.760000, 17620.538000, 1492.992043, 1492.992043, 0.000000, X, Y) && !ellipse(21741.846000, 16809.606000, 2786.744080, 2786.744080, 0.000000, X, Y) && !ellipse(21865.753600, 17037.073400, 1694.352049, 448.236013, 123.407100, X, Y) && !ellipse(21267.624000, 16090.774000, 1580.200045, 1580.200045, 0.000000, X, Y)
[Fri Jun  1 02:16:03 2012] Writing fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 02:18:07 2012] Mean detx,y = (335.93, 14058.92) 
[Fri Jun  1 02:18:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 02:18:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 02:18:20 2012] Setting source spectrum file to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 02:18:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 05:25:54 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:25:54 2012] Error reading totcts from fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 05:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:25:55 2012] Using photon index=1.80, rate=0.0142, arf fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 05:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:25:55 2012] Updating source flux to 9.1e-14
[Fri Jun  1 05:30:31 2012] Reading fit data from xmm0117510201/analysis//spectral/fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  1 05:30:31 2012] Spectral fit parameter nH value = 3.53779e+20
[Fri Jun  1 05:30:31 2012] Spectral fit parameter PhoIndex value = 1.53008
[Fri Jun  1 05:30:31 2012] Failed to get F(0.3-8.0) from xmm0117510201/analysis//spectral/fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 05:30:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:30:31 2012] Using Nh = 3.5e+20, photon index=1.53, rate=0.0142, arf fullrun_pn_xmm0117510201_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 05:30:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:30:31 2012] Updating source flux to 1.2e-13