[Thu May 31 19:36:21 2012] Detection parameters:
  Position = (425.0, 452.9) = 5 38 49.79 -69 9 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 13.2
  Background counts = 30.2
  Rate = 0.006 +/- 0.001

[Thu May 31 19:36:22 2012] Off-axis axis estimate = 14.48'
[Thu May 31 19:38:07 2012] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:38:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 19:38:07 2012] Initial guess for spatial extent in simple fitting = 13.67"
[Thu May 31 19:38:07 2012] source mask rpix=3.1, npix_max = 53, mask sum = 53, frac = 0.999
[Thu May 31 19:38:07 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.67"
[Thu May 31 21:59:06 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src17.ximg exists
[Thu May 31 21:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src17.csv
[Thu May 31 21:59:06 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu May 31 21:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src17.csv
[Thu May 31 21:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:59:08 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu May 31 21:59:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May 31 21:59:08 2012] fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu May 31 21:59:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May 31 21:59:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:52:59 2012] Spatial fit model total counts = 993.878000, observed total counts = 943.000000
[Thu May 31 22:52:59 2012] Offset between fit and detection position for source 17 = 1.414057 pixels
[Thu May 31 22:52:59 2012] Warning, changing simple spatial fit ID from 17 to 16
[Thu May 31 22:52:59 2012] 983.953100 total counts/ 961.640000 bgd. counts: snr = 0.719538
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.414057 pixels
  Position = (424.3, 454.2) = 5 38 50.35 -69 9 7.3
  Extent = 8.9 (4.9-20.4)", rotation angle = 0
  Source counts = 22.3 +/- 31.4
  Background counts = 961.6
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability