[Thu May 31 19:37:00 2012] Detection parameters:
  Position = (395.0, 273.7) = 5 39 13.42 -69 22 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.4 +/- 9.1
  Background counts = 11.4
  Rate = 0.007 +/- 0.001

[Thu May 31 19:37:00 2012] Off-axis axis estimate = 7.23'
[Thu May 31 22:28:33 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Thu May 31 22:28:33 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Thu May 31 22:28:33 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.919
[Thu May 31 22:28:33 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.04"
[Thu May 31 22:52:49 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 31 22:52:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_src4.csv
[Thu May 31 22:52:49 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 31 22:52:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_src4.csv
[Thu May 31 22:52:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:52:49 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 31 22:52:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 31 22:52:49 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 31 22:52:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 31 22:52:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:53:04 2012] Spatial fit model total counts = 103.375000, observed total counts = 116.000000
[Thu May 31 22:53:04 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 22:53:04 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:53:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:53:04 2012] Assessing source extent using major
[Thu May 31 22:53:04 2012] Source does appear to be extended
[Thu May 31 22:53:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:49:31 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 01:49:31 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Fri Jun  1 01:49:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.919
[Fri Jun  1 01:49:31 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.04"
[Fri Jun  1 02:15:43 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  1 02:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 02:15:43 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  1 02:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 02:15:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:15:43 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  1 02:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun  1 02:15:43 2012] fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  1 02:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun  1 02:15:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:15:56 2012] Spatial fit model total counts = 171.330000, observed total counts = 116.000000
[Fri Jun  1 02:15:56 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  1 02:15:56 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:15:56 2012] Assessing source extent using major
[Fri Jun  1 02:15:56 2012] Source does appear to be extended
[Fri Jun  1 02:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:11:47 2012] XMMSAS src. selection expression = ellipse(34317.939026, 23761.364655, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 05:11:47 2012] Writing source region out to fullrun_mos2_xmm0117510201_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun  1 05:11:47 2012] Extracting stamp from image fullrun_mos2_xmm0117510201_pi300-10000_cl_sm2.00.img.gz, (358, 236) - (433, 311)
[Fri Jun  1 05:11:47 2012] XMMSAS bgd. selection expression = annulus(34317.939026, 23761.364655, 1087.500000, 2175.000000, X, Y)
[Fri Jun  1 05:11:47 2012] Writing fullrun_mos2_xmm0117510201_pi300-10000_pass1_cl_src9.gif
[Fri Jun  1 05:13:46 2012] Mean detx,y = (-7029.02, 1305.63) 
[Fri Jun  1 05:13:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 05:14:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 05:14:03 2012] Setting source spectrum file to fullrun_mos2_xmm0117510201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  1 05:14:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0117510201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun  1 05:19:41 2012] Not generating rmf since there are only 48 counts
[Fri Jun  1 05:19:41 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:25:56 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:25:56 2012] Error reading totcts from fullrun_mos2_xmm0117510201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  1 05:25:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:25:56 2012] Using photon index=1.80, rate=0.00684, arf fullrun_mos2_xmm0117510201_pi300-10000_pass1_cl_src9.arf
[Fri Jun  1 05:25:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:25:56 2012] Updating source flux to 9.9e-14
[Fri Jun  1 05:26:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting