[Thu May 31 19:36:42 2012] Detection parameters:
  Position = (325.5, 305.2) = 5 40 10.69 -69 19 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8587.5 +/- 110.1
  Background counts = 8.0
  Rate = 2 +/- 0.03

[Thu May 31 19:36:42 2012] Off-axis axis estimate = 2.02'
[Thu May 31 21:59:08 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Thu May 31 21:59:08 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Thu May 31 21:59:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Thu May 31 21:59:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.44"
[Thu May 31 22:28:33 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 22:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 22:28:33 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 22:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 22:28:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:28:33 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 22:28:33 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 22:28:33 2012] Fit fullrun_mos1_xmm0117510201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 22:53:02 2012] Spatial fit model total counts = 8517.370000, observed total counts = 8521.000000
[Thu May 31 22:53:02 2012] Offset between fit and detection position for source 4 = 0.177621 pixels
[Thu May 31 22:53:02 2012] 8572.570000 total counts/ 2325.660000 bgd. counts: snr = 129.536494
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.177621 pixels
  Position = (325.5, 305.4) = 5 40 10.71 -69 19 56.4
  Extent = 6.5 (6.4-6.7)", rotation angle = 0
  Source counts = 6246.9 +/- 92.6
  Background counts = 2325.7
  Rate = 2 +/- 0.03
[Thu May 31 22:53:02 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:53:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:53:02 2012] Assessing source extent using major axis lower bound
[Thu May 31 22:53:02 2012] Source does appear to be extended
[Thu May 31 22:53:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:35:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 01:35:45 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Fri Jun  1 01:35:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.999
[Fri Jun  1 01:35:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.53"
[Fri Jun  1 01:49:31 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 01:49:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 01:49:31 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 01:49:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 01:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 01:49:31 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 01:49:31 2012] fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 01:49:31 2012] Fit fullrun_mos1_xmm0117510201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 02:15:53 2012] Spatial fit model total counts = 8521.000000, observed total counts = 8521.000000
[Fri Jun  1 02:15:53 2012] Offset between fit and detection position for source 4 = 0.000938 pixels
[Fri Jun  1 02:15:53 2012] 8576.150000 total counts/ 2326.910000 bgd. counts: snr = 129.549998
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000938 pixels
  Position = (325.5, 305.4) = 5 40 10.71 -69 19 56.4
  Extent = 6.5 (6.4-6.7)", rotation angle = 0
  Source counts = 6249.2 +/- 92.6
  Background counts = 2326.9
  Rate = 2 +/- 0.03
[Fri Jun  1 02:15:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:15:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:15:53 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 02:15:53 2012] Source does appear to be extended
[Fri Jun  1 02:15:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:01:41 2012] Counts = 6249.240000, rescaling region sizes by 2.000000
[Fri Jun  1 05:01:41 2012] XMMSAS src. selection expression = ellipse(28267.433200, 26518.239000, 783.462023, 783.462023, 0.000000, X, Y)
[Fri Jun  1 05:01:41 2012] Writing source region out to fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  1 05:01:41 2012] Extracting stamp from image fullrun_mos1_xmm0117510201_pi300-10000_cl_sm2.00.img.gz, (280, 260) - (370, 350)
[Fri Jun  1 05:01:41 2012] XMMSAS bgd. selection expression = annulus(28267.433200, 26518.239000, 2611.540075, 5223.080150, X, Y)
[Fri Jun  1 05:01:41 2012] Writing fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4.gif
[Fri Jun  1 05:01:43 2012] Mean detx,y = (376.97, 74.99) 
[Fri Jun  1 05:01:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 05:02:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 05:02:04 2012] Setting source spectrum file to fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 05:02:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  1 05:25:56 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:25:56 2012] Error reading totcts from fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 05:25:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:25:56 2012] Using photon index=1.80, rate=1.74, arf fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 05:25:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:25:56 2012] Updating source flux to 1.7e-11
[Fri Jun  1 05:26:12 2012] Reading fit data from xmm0117510201/analysis//spectral/fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4_pl.csv
[Fri Jun  1 05:26:12 2012] Spectral fit parameter nH value = 3.9887e+21
[Fri Jun  1 05:26:12 2012] Spectral fit parameter PhoIndex value = 1.94639
[Fri Jun  1 05:26:12 2012] Failed to get F(0.3-8.0) from xmm0117510201/analysis//spectral/fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 05:26:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:26:12 2012] Using Nh = 4e+21, photon index=1.95, rate=1.74, arf fullrun_mos1_xmm0117510201_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 05:26:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:26:12 2012] Updating source flux to 2e-11