[Tue Jun  4 01:18:48 2013] Detection parameters:
  Position = (218.2, 428.9) = 6 17 49.45 22 36 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.2 +/- 24.0
  Background counts = 284.1
  Rate = 0.005 +/- 0.001

[Tue Jun  4 01:18:59 2013] Off-axis axis estimate = 11.10'
[Tue Jun  4 01:28:41 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 01:28:41 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Tue Jun  4 01:28:41 2013] source mask rpix=2.8, npix_max = 42, mask sum = 30, frac = 0.708
[Tue Jun  4 01:28:41 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 11.98"
[Tue Jun  4 10:07:57 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_src44.ximg exists
[Tue Jun  4 10:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_src44.csv
[Tue Jun  4 10:07:57 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue Jun  4 10:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_src44.csv
[Tue Jun  4 10:07:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 10:08:02 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue Jun  4 10:08:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue Jun  4 10:08:02 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Jun  4 10:08:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue Jun  4 10:08:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100301_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 18:25:42 2013] Warning, spatial fit 44 centroid is now closest to src. 62
[Tue Jun  4 18:25:42 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 18:25:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 18:25:42 2013] Assessing source extent using major
[Tue Jun  4 18:25:42 2013] Source does appear to be extended
[Tue Jun  4 18:25:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 18:25:42 2013] Source is confused with source 60
[Tue Jun  4 18:26:42 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 18:26:42 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Tue Jun  4 18:26:42 2013] source mask rpix=2.8, npix_max = 42, mask sum = 30, frac = 0.708
[Tue Jun  4 18:26:42 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 11.98"
[Wed Jun  5 01:06:43 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_src44.ximg exists
[Wed Jun  5 01:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_src44.csv
[Wed Jun  5 01:06:43 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_src44_1.ximg exists
[Wed Jun  5 01:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_src44.csv
[Wed Jun  5 01:06:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 01:06:47 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Wed Jun  5 01:06:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Wed Jun  5 01:06:47 2013] fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Wed Jun  5 01:06:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Wed Jun  5 01:06:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100301_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 09:36:28 2013] Warning, spatial fit 44 centroid is now closest to src. 53
[Wed Jun  5 09:36:28 2013] Source 47 is offset by 5.217487 and -1.275574 pixels which is larger than
2 X fitted extent = 2.458193 x 2.458193, not incorporating fit results
[Wed Jun  5 09:36:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 09:36:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 09:36:29 2013] Assessing source extent using major
[Wed Jun  5 09:36:29 2013] Source does appear to be extended
[Wed Jun  5 09:36:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 09:37:23 2013] XMMSAS src. selection expression = ellipse(18938.935379, 37267.565063, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 09:37:23 2013] Writing source region out to fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47_src.reg
[Wed Jun  5 09:37:23 2013] Extracting stamp from image fullrun_pn_xmm0114100301_pi300-10000_cl_sm2.00.img.gz, (181, 391) - (256, 466)
[Wed Jun  5 09:37:24 2013] XMMSAS bgd. selection expression = annulus(18938.935379, 37267.565063, 1087.500000, 2175.000000, X, Y) && !ellipse(19223.173523, 35376.148743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20694.280121, 34486.068756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16343.798233, 37176.553314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18845.311081, 38197.823608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19676.911392, 37784.055878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16816.352295, 37530.152771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16848.382568, 37115.877930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18039.008000, 37202.830800, 1953.712056, 1953.712056, 0.000000, X, Y) && !ellipse(17255.362717, 36753.758484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17690.840622, 37092.638458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19546.583969, 37029.945251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18816.235855, 36391.596558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18462.647018, 36477.125671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16254.165771, 36469.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.234451, 36151.133209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.475296, 36141.888397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19545.081223, 35884.785980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18041.855408, 35800.114441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16929.153870, 35714.362305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17116.863113, 34740.534729, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  5 09:37:24 2013] Writing fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47.gif
[Wed Jun  5 10:21:45 2013] Mean detx,y = (5237.08, 13232.96) 
[Wed Jun  5 10:21:49 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 10:22:08 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 10:22:08 2013] Setting source spectrum file to fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed Jun  5 10:22:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed Jun  5 12:29:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 12:29:11 2013] rmf not generated due to insufficient counts
[Wed Jun  5 18:00:13 2013] Updating aperture counts using extracted products
[Wed Jun  5 18:00:13 2013] Total counts from fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 2146.00
[Wed Jun  5 18:00:13 2013] Total counts from fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47_bgd.pi.gz = 877.00
[Wed Jun  5 18:00:13 2013] Got source and background scale factors 1036052.000000, 0.000000
[Wed Jun  5 18:00:13 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed Jun  5 18:00:42 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 18:00:42 2013] Using photon index=1.80, rate=0.00458, arf fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47.arf
[Wed Jun  5 18:00:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 18:00:42 2013] Updating source flux to 5.4e-14
[Wed Jun  5 18:01:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 18:01:52 2013] xmm0114100301/analysis//spectral/fullrun_pn_xmm0114100301_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete