[Sat Aug 11 06:39:46 2012] Detection parameters:
  Position = (335.7, 307.9) = 6 17 12.58 22 43 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 673.8 +/- 56.8
  Background counts = 1205.9
  Rate = 0.04 +/- 0.003

[Sat Aug 11 06:39:56 2012] Off-axis axis estimate = 2.79'
[Sat Aug 11 06:53:36 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 06:53:36 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Sat Aug 11 06:53:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.947
[Sat Aug 11 06:53:36 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.82"
[Sat Aug 11 15:49:15 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Aug 11 15:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src30.csv
[Sat Aug 11 15:49:15 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Aug 11 15:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src30.csv
[Sat Aug 11 15:49:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 15:49:18 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Aug 11 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Aug 11 15:49:18 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Aug 11 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Aug 11 15:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 03:54:27 2012] Spatial fit model total counts = 15515.600000, observed total counts = 12286.000000
[Sun Aug 12 03:54:27 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 03:54:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 03:54:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 03:54:29 2012] Assessing source extent using major
[Sun Aug 12 03:54:29 2012] Source does appear to be extended
[Sun Aug 12 03:54:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 03:56:37 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 03:56:37 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Sun Aug 12 03:56:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.947
[Sun Aug 12 03:56:37 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.82"
[Sun Aug 12 13:02:26 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src27.ximg exists
[Sun Aug 12 13:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src27.csv
[Sun Aug 12 13:02:26 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Aug 12 13:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src27.csv
[Sun Aug 12 13:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:02:30 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Aug 12 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Aug 12 13:02:30 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Aug 12 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Aug 12 13:02:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 02:00:05 2012] Spatial fit model total counts = 15515.600000, observed total counts = 12286.000000
[Mon Aug 13 02:00:05 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 13 02:00:06 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:00:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:00:06 2012] Assessing source extent using major
[Mon Aug 13 02:00:06 2012] Source does appear to be extended
[Mon Aug 13 02:00:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 02:01:30 2012] XMMSAS src. selection expression = ellipse(29159.169312, 26739.017181, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 02:01:30 2012] Writing source region out to fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src45_src.reg
[Mon Aug 13 02:01:30 2012] Extracting stamp from image fullrun_pn_xmm0114100101_pi300-10000_cl_sm2.00.img.gz, (298, 270) - (373, 345)
[Mon Aug 13 02:01:30 2012] XMMSAS bgd. selection expression = annulus(29159.169312, 26739.017181, 1087.500000, 2175.000000, X, Y) && !ellipse(28533.304565, 29607.537384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28795.207275, 25984.457855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26961.344025, 24575.789581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.843475, 28654.113708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.702118, 27377.222504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.184998, 26128.891449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.806091, 25869.463226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.644562, 25612.878540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.298523, 24922.135498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26575.422241, 26564.337494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.771800, 25285.311000, 1079.024031, 1079.024031, 0.000000, X, Y) && !ellipse(27391.089722, 29433.566589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.349823, 27002.446533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31462.935577, 24129.943787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.765259, 24405.989838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27365.678436, 27878.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29250.919159, 24152.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29138.311401, 28934.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.548462, 28982.915192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.525665, 27247.885406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.988953, 26835.575287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29452.056213, 25704.514221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.867676, 25096.544373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31793.510620, 24545.949707, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 02:01:30 2012] Writing fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src45.gif
[Mon Aug 13 02:50:05 2012] Mean detx,y = (-4387.37, 2077.87) 
[Mon Aug 13 02:50:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 02:50:21 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 02:50:21 2012] Setting source spectrum file to fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Aug 13 02:50:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon Aug 13 06:44:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 06:44:10 2012] rmf not generated due to insufficient counts
[Mon Aug 13 21:54:04 2012] Updating aperture counts using extracted products
[Mon Aug 13 21:54:04 2012] Error reading totcts from fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Aug 13 21:54:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 21:54:20 2012] Using photon index=1.80, rate=0.0359, arf fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src45.arf
[Mon Aug 13 21:54:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 21:54:20 2012] Updating source flux to 1.2e-13
[Mon Aug 13 22:16:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting