[Sat Aug 11 06:39:45 2012] Detection parameters:
  Position = (293.9, 431.9) = 6 17 25.72 22 52 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 521.4 +/- 43.6
  Background counts = 491.7
  Rate = 0.02 +/- 0.002

[Sat Aug 11 06:39:56 2012] Off-axis axis estimate = 9.68'
[Sat Aug 11 06:53:36 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 06:53:36 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sat Aug 11 06:53:36 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sat Aug 11 06:53:36 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.27"
[Sat Aug 11 15:49:15 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Aug 11 15:49:15 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Aug 11 15:49:15 2012] Fit fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_src20 appears to have run properly
[Sat Aug 11 15:49:18 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Aug 11 15:49:18 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Aug 11 15:49:18 2012] Fit fullrun_pn_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Aug 12 03:54:27 2012] Spatial fit model total counts = 7874.520000, observed total counts = 7871.000000
[Sun Aug 12 03:54:27 2012] Offset between fit and detection position for source 32 = 2.957240 pixels
[Sun Aug 12 03:54:27 2012] 6900.394000 total counts/ 6227.390000 bgd. counts: snr = 8.528342
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 2.957240 pixels
  Position = (295.4, 434.5) = 6 17 25.26 22 53 2.6
  Extent = 15.0 (12.7-22.5)", rotation angle = 0
  Source counts = 673.0 +/- 83.1
  Background counts = 6227.4
  Rate = 0.03 +/- 0.004
[Sun Aug 12 03:54:28 2012] Spatial fit model total counts = 5746.410000, observed total counts = 3647.000000
[Sun Aug 12 03:54:28 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 03:54:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 03:54:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 03:54:29 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 03:54:29 2012] Source does appear to be extended
[Sun Aug 12 03:54:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 03:54:29 2012] Source is confused with source 52
[Sun Aug 12 03:54:29 2012] Source is confused with source 56
[Sun Aug 12 03:56:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 03:56:37 2012] Initial guess for spatial extent in simple fitting = 14.97"
[Sun Aug 12 03:56:37 2012] source mask rpix=3.4, npix_max = 62, mask sum = 56, frac = 0.901
[Sun Aug 12 03:56:37 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 14.97"
[Sun Aug 12 13:02:26 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src18.ximg exists
[Sun Aug 12 13:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src18.csv
[Sun Aug 12 13:02:26 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Aug 12 13:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src18.csv
[Sun Aug 12 13:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:02:29 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Aug 12 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Aug 12 13:02:29 2012] fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Aug 12 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Aug 12 13:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 02:00:05 2012] Warning, spatial fit 18 centroid is now closest to src. 18
[Mon Aug 13 02:00:06 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:00:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:00:06 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 02:00:06 2012] Source does appear to be extended
[Mon Aug 13 02:00:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 02:01:29 2012] XMMSAS src. selection expression = ellipse(25649.952800, 37753.977200, 898.230026, 898.230026, 0.000000, X, Y)
[Mon Aug 13 02:01:29 2012] Writing source region out to fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src32_src.reg
[Mon Aug 13 02:01:29 2012] Extracting stamp from image fullrun_pn_xmm0114100101_pi300-10000_cl_sm2.00.img.gz, (244, 383) - (347, 486)
[Mon Aug 13 02:01:29 2012] XMMSAS bgd. selection expression = annulus(25649.952800, 37753.977200, 1497.050043, 2994.100086, X, Y) && !ellipse(28017.318207, 35452.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25710.894000, 36185.490000, 1764.224051, 1764.224051, 0.000000, X, Y) && !ellipse(23231.796000, 36983.586000, 1793.360052, 1793.360052, 0.000000, X, Y) && !ellipse(26648.608124, 36138.914764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.766000, 36476.596000, 1413.176041, 1413.176041, 0.000000, X, Y) && !ellipse(26744.133423, 36747.362518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25087.806671, 36919.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22248.823669, 36822.048492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23834.454956, 37196.983765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27222.155518, 36408.278107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.185000, 36649.642120, 1567.040045, 929.856027, 161.238000, X, Y) && !ellipse(25098.378998, 38051.369537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22843.791840, 36764.022827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25772.968842, 38045.698395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.338000, 38210.666000, 1834.632053, 1834.632053, 0.000000, X, Y) && !ellipse(31561.034000, 35914.314000, 3775.032109, 3775.032109, 0.000000, X, Y) && !ellipse(26727.972260, 38669.808167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27490.409058, 38684.732086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24229.831299, 36424.816284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.818146, 36156.602570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29289.130000, 35258.182000, 1721.928050, 1721.928050, 0.000000, X, Y)
[Mon Aug 13 02:01:29 2012] Writing fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src32.gif
[Mon Aug 13 02:41:27 2012] Mean detx,y = (-1427.75, 13224.77) 
[Mon Aug 13 02:41:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 02:41:49 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 02:41:49 2012] Setting source spectrum file to fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Aug 13 02:41:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Aug 13 21:54:04 2012] Updating aperture counts using extracted products
[Mon Aug 13 21:54:04 2012] Error reading totcts from fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Aug 13 21:54:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 21:54:20 2012] Using photon index=1.80, rate=0.0317, arf fullrun_pn_xmm0114100101_pi300-10000_pass1_cl_src32.arf
[Mon Aug 13 21:54:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 21:54:20 2012] Updating source flux to 1.8e-13
[Mon Aug 13 22:16:07 2012] Flag p found in src. 32 procflags, skipping spectral fitting
[Mon Aug 13 22:16:07 2012] Flag c found in src. 32 procflags, skipping spectral fitting