[Sat Aug 11 06:43:22 2012] Detection parameters:
  Position = (325.7, 322.0) = 6 17 15.73 22 44 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.2 +/- 34.7
  Background counts = 389.5
  Rate = 0.02 +/- 0.002

[Sat Aug 11 06:43:30 2012] Off-axis axis estimate = 2.61'
[Sat Aug 11 22:00:19 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 22:00:19 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sat Aug 11 22:00:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.964
[Sat Aug 11 22:00:19 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.73"
[Sun Aug 12 03:53:35 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 12 03:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_src21.csv
[Sun Aug 12 03:53:35 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 12 03:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_src21.csv
[Sun Aug 12 03:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 03:53:37 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 12 03:53:37 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 12 03:53:37 2012] Fit fullrun_mos2_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Aug 12 03:55:26 2012] Warning, spatial fit 21 centroid is now closest to src. 109
[Sun Aug 12 03:55:27 2012] Spatial fit model total counts = 5345.830000, observed total counts = 5350.000000
[Sun Aug 12 03:55:27 2012] Offset between fit and detection position for source 38 = 6.539041 pixels
[Sun Aug 12 03:55:27 2012] Warning, changing simple spatial fit ID from 21 to 75
[Sun Aug 12 03:55:27 2012] 5304.418000 total counts/ 4897.500000 bgd. counts: snr = 5.814598
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 6.539041 pixels
  Position = (323.5, 328.1) = 6 17 16.41 22 45 19.8
  Extent = 16.1 (15.7-16.2)", rotation angle = 0
  Source counts = 406.9 +/- 72.8
  Background counts = 4897.5
  Rate = 0.02 +/- 0.003
[Sun Aug 12 03:55:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 03:55:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 03:55:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 03:55:27 2012] Source does appear to be extended
[Sun Aug 12 03:55:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 03:55:27 2012] Source is confused with source 35
[Sun Aug 12 20:18:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 20:18:57 2012] Initial guess for spatial extent in simple fitting = 16.07"
[Sun Aug 12 20:18:57 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.023
[Sun Aug 12 20:18:57 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 16.07"
[Mon Aug 13 01:59:35 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_src19.ximg exists
[Mon Aug 13 01:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_src19.csv
[Mon Aug 13 01:59:35 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Aug 13 01:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_src19.csv
[Mon Aug 13 01:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 01:59:37 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Aug 13 01:59:37 2012] fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Aug 13 01:59:37 2012] Fit fullrun_mos2_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Aug 13 02:00:49 2012] Warning, spatial fit 19 centroid is now closest to src. 101
[Mon Aug 13 02:00:50 2012] Spatial fit model total counts = 10515.000000, observed total counts = 10510.000000
[Mon Aug 13 02:00:50 2012] Offset between fit and detection position for source 38 = 7.899667 pixels
[Mon Aug 13 02:00:50 2012] Warning, changing simple spatial fit ID from 19 to 35
[Mon Aug 13 02:00:50 2012] 10359.590000 total counts/ 9333.780000 bgd. counts: snr = 10.617888
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 7.899667 pixels
  Position = (328.5, 334.3) = 6 17 14.86 22 45 46.7
  Extent = 25.0 (10.0-33.1)", rotation angle = 0
  Source counts = 1025.8 +/- 101.8
  Background counts = 9333.8
  Rate = 0.04 +/- 0.004
[Mon Aug 13 02:00:50 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:00:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:00:50 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 02:00:50 2012] Source does appear to be extended
[Mon Aug 13 02:00:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 14:13:46 2012] Counts = 1025.810000, rescaling region sizes by 2.000000
[Mon Aug 13 14:13:46 2012] XMMSAS src. selection expression = ellipse(28528.156000, 29035.224000, 3000.504086, 3000.504086, 0.000000, X, Y)
[Mon Aug 13 14:13:46 2012] Writing source region out to fullrun_mos2_xmm0114100101_pi300-10000_pass1_cl_src38_src.reg
[Mon Aug 13 14:13:46 2012] Extracting stamp from image fullrun_mos2_xmm0114100101_pi300-10000_cl_sm2.00.img.gz, (156, 162) - (501, 507)
[Mon Aug 13 14:13:46 2012] XMMSAS bgd. selection expression = annulus(28528.156000, 29035.224000, 10001.680288, 20003.360576, X, Y) && !ellipse(25689.083600, 36241.197600, 1052.600030, 1052.600030, 0.000000, X, Y) && !ellipse(24445.398000, 27956.561840, 345.651210, 345.651210, 0.000000, X, Y) && !ellipse(26104.606000, 35985.370000, 3548.704102, 3548.704102, 0.000000, X, Y) && !ellipse(21256.796400, 27439.827000, 1707.320049, 1413.112041, 0.000000, X, Y) && !ellipse(25947.658000, 26785.766611, 1008.494521, 619.615586, 52.758136, X, Y) && !ellipse(28098.778000, 28611.188000, 1297.872037, 1297.872037, 0.000000, X, Y) && !ellipse(26197.635468, 36670.244537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.526600, 36160.294600, 1495.112043, 1495.112043, 0.000000, X, Y) && !ellipse(25020.137939, 36568.602051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26468.875916, 26401.833771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.571000, 25363.515200, 1077.688031, 730.602421, 0.000000, X, Y) && !ellipse(21659.196000, 27346.307200, 1315.096038, 1315.096038, 0.000000, X, Y) && !ellipse(26665.637000, 25372.122000, 998.064029, 476.352814, 359.927000, X, Y) && !ellipse(23026.463165, 36919.026093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29214.112000, 29012.726600, 703.912820, 703.912820, 0.000000, X, Y) && !ellipse(22446.306932, 36920.671138, 1332.184038, 1142.616927, 145.765813, X, Y) && !ellipse(32257.994000, 28173.150140, 2149.568062, 405.764812, 359.988000, X, Y) && !ellipse(15377.306440, 18301.801400, 784.469623, 784.469623, 0.000000, X, Y) && !ellipse(28316.468323, 35528.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.759000, 27377.091400, 1236.216036, 1236.216036, 0.000000, X, Y) && !ellipse(25843.297913, 18255.362244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26915.194980, 36567.155800, 793.808823, 793.808823, 0.000000, X, Y) && !ellipse(28386.160187, 25971.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28567.884000, 25207.868000, 1236.200036, 1236.200036, 0.000000, X, Y) && !ellipse(26171.362400, 25334.526400, 1067.344031, 1067.344031, 0.000000, X, Y) && !ellipse(27203.350000, 27553.956000, 1176.296034, 1176.296034, 0.000000, X, Y) && !ellipse(17195.361710, 22851.363983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27407.934000, 29522.776000, 1318.952038, 1318.952038, 0.000000, X, Y) && !ellipse(23522.836000, 37276.372000, 1787.000051, 1787.000051, 0.000000, X, Y) && !ellipse(25527.314911, 27440.470612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.584000, 29274.527000, 1322.152038, 1322.152038, 0.000000, X, Y) && !ellipse(19647.901215, 15618.951340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25030.513794, 27088.450897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27795.365723, 27088.663300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.426422, 25695.723419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30050.810000, 28976.442200, 1336.600038, 1336.600038, 0.000000, X, Y) && !ellipse(27836.696564, 29519.456787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32757.491740, 23932.452600, 578.555217, 578.555217, 0.000000, X, Y) && !ellipse(27643.434326, 24937.643524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.242000, 27180.730000, 2324.912067, 2324.912067, 0.000000, X, Y) && !ellipse(25279.343140, 35479.012543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.984200, 30366.370200, 667.536819, 667.536819, 0.000000, X, Y) && !ellipse(27607.713562, 26062.576782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30636.435577, 30499.510406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.374000, 27872.540000, 1141.744033, 1141.744033, 0.000000, X, Y) && !ellipse(21450.047485, 36649.660095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26410.608643, 37091.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33147.258000, 29155.422000, 1522.144044, 1522.144044, 0.000000, X, Y) && !ellipse(29715.636400, 30414.565600, 1432.496041, 1432.496041, 0.000000, X, Y) && !ellipse(29652.261353, 28763.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25706.667450, 37798.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18912.880249, 30147.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.341980, 38749.108582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27465.430542, 37182.651917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23321.207400, 26831.628200, 1205.184035, 1205.184035, 0.000000, X, Y) && !ellipse(27953.324036, 24490.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30508.306519, 36582.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28585.826000, 28832.124000, 1530.544044, 851.416024, 120.267000, X, Y) && !ellipse(14486.959686, 28218.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32782.224945, 28683.518158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.790000, 25150.066000, 1284.480037, 1284.480037, 0.000000, X, Y) && !ellipse(24835.363831, 15879.265015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29735.684000, 25416.604000, 1269.792037, 1269.792037, 0.000000, X, Y) && !ellipse(25374.926849, 25466.087280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25727.838654, 15628.135086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27304.750824, 17464.127670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30716.741030, 23552.374181, 1384.048040, 840.246204, 358.552715, X, Y) && !ellipse(15148.322000, 20110.394000, 1817.616052, 1817.616052, 0.000000, X, Y) && !ellipse(25931.593567, 38148.153320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31570.886414, 36834.362518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28255.304413, 36847.292511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31470.356384, 36134.141022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.685272, 27457.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32179.931549, 23751.379089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.546000, 37205.116000, 894.024026, 894.024026, 0.000000, X, Y) && !ellipse(28892.745087, 37099.865448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27638.607483, 29915.850006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25261.904907, 37635.318481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30096.580000, 37193.490000, 1802.520052, 1802.520052, 0.000000, X, Y) && !ellipse(24847.194641, 38136.280029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21062.751724, 26673.891968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.630615, 36846.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32023.152069, 36048.380920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12470.937531, 20658.271286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.544952, 37262.178009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.784000, 34997.860000, 1784.360051, 1784.360051, 0.000000, X, Y) && !ellipse(24865.501068, 25572.054810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25015.311096, 26404.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28772.700592, 36406.345245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.612610, 27877.252136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34495.212677, 34936.988312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29920.289215, 36486.795288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31075.813721, 37625.399292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26284.080000, 38632.792000, 1844.080053, 1191.304034, 130.656000, X, Y) && !ellipse(27736.724091, 37717.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35306.733002, 24371.647034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32491.079742, 36223.339386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.606720, 37279.310913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.686096, 37612.814453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31970.056000, 37343.524000, 1586.472046, 1586.472046, 0.000000, X, Y) && !ellipse(22158.182297, 28076.477570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29120.938000, 38012.786800, 1848.496053, 1848.496053, 0.000000, X, Y) && !ellipse(13070.703339, 21177.110474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28637.649872, 12725.812378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.558960, 38669.847992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.384033, 37625.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29243.965637, 35721.472473, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 14:13:46 2012] Writing fullrun_mos2_xmm0114100101_pi300-10000_pass1_cl_src38.gif
[Mon Aug 13 14:44:22 2012] Mean detx,y = (3859.56, -4369.61) 
[Mon Aug 13 14:44:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 14:54:05 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 14:54:06 2012] Setting source spectrum file to fullrun_mos2_xmm0114100101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Aug 13 14:54:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0114100101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Aug 13 21:54:48 2012] Updating aperture counts using extracted products
[Mon Aug 13 21:54:48 2012] Error reading totcts from fullrun_mos2_xmm0114100101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Aug 13 21:54:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 21:54:58 2012] Using photon index=1.80, rate=0.0449, arf fullrun_mos2_xmm0114100101_pi300-10000_pass1_cl_src38.arf
[Mon Aug 13 21:54:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 21:54:58 2012] Updating source flux to 4.6e-13
[Mon Aug 13 22:05:39 2012] Flag c found in src. 38 procflags, skipping spectral fitting