[Sat Aug 11 06:41:35 2012] Detection parameters:
  Position = (337.4, 303.0) = 6 17 12.04 22 43 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.6 +/- 33.4
  Background counts = 367.2
  Rate = 0.01 +/- 0.002

[Sat Aug 11 06:41:39 2012] Off-axis axis estimate = 2.85'
[Sat Aug 11 15:49:20 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 15:49:20 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Sat Aug 11 15:49:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.941
[Sat Aug 11 15:49:20 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.85"
[Sat Aug 11 22:00:13 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src15.ximg exists
[Sat Aug 11 22:00:13 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Aug 11 22:00:13 2012] Fit fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src15 appears to have run properly
[Sat Aug 11 22:00:16 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Aug 11 22:00:16 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Aug 11 22:00:16 2012] Fit fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Aug 12 03:55:02 2012] Spatial fit model total counts = 5121.620000, observed total counts = 5123.000000
[Sun Aug 12 03:55:02 2012] Offset between fit and detection position for source 95 = 0.393515 pixels
[Sun Aug 12 03:55:02 2012] 5064.378000 total counts/ 4821.490000 bgd. counts: snr = 3.497965
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.393515 pixels
  Position = (337.8, 302.9) = 6 17 11.92 22 43 30.0
  Extent = 11.6 (4.4-15.7)", rotation angle = 0
  Source counts = 242.9 +/- 71.2
  Background counts = 4821.5
  Rate = 0.01 +/- 0.003
[Sun Aug 12 03:55:03 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 03:55:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 03:55:03 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 03:55:03 2012] Source does appear to be extended
[Sun Aug 12 03:55:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 03:55:03 2012] Source is confused with source 92
[Sun Aug 12 03:55:03 2012] Source is confused with source 99
[Sun Aug 12 13:02:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 13:02:32 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Sun Aug 12 13:02:32 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.899
[Sun Aug 12 13:02:32 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.59"
[Sun Aug 12 20:18:53 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src13.ximg exists
[Sun Aug 12 20:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src13.csv
[Sun Aug 12 20:18:53 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Aug 12 20:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src13.csv
[Sun Aug 12 20:18:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 20:18:55 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Aug 12 20:18:55 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Aug 12 20:18:55 2012] Fit fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Aug 13 02:00:28 2012] Warning, spatial fit 13 centroid is now closest to src. 87
[Mon Aug 13 02:00:28 2012] Spatial fit model total counts = 5091.340000, observed total counts = 5081.000000
[Mon Aug 13 02:00:28 2012] Offset between fit and detection position for source 95 = 0.634040 pixels
[Mon Aug 13 02:00:28 2012] Warning, changing simple spatial fit ID from 13 to 80
[Mon Aug 13 02:00:28 2012] 4941.193000 total counts/ 4776.550000 bgd. counts: snr = 2.382243
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.634040 pixels
  Position = (337.3, 302.5) = 6 17 12.08 22 43 28.5
  Extent = 8.2 (4.2-15.7)", rotation angle = 0
  Source counts = 164.6 +/- 70.3
  Background counts = 4776.6
  Rate = 0.007 +/- 0.003
[Mon Aug 13 02:00:28 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:00:28 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 02:00:28 2012] Source does appear to be extended
[Mon Aug 13 02:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 08:29:04 2012] XMMSAS src. selection expression = ellipse(29296.889200, 26271.148000, 491.692214, 491.692214, 0.000000, X, Y)
[Mon Aug 13 08:29:04 2012] Writing source region out to fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src95_src.reg
[Mon Aug 13 08:29:04 2012] Extracting stamp from image fullrun_mos1_xmm0114100101_pi300-10000_cl_sm2.00.img.gz, (309, 274) - (366, 331)
[Mon Aug 13 08:29:04 2012] XMMSAS bgd. selection expression = annulus(29296.889200, 26271.148000, 819.487024, 1638.974047, X, Y) && !ellipse(25881.726000, 26861.108800, 2538.248073, 1085.264031, 33.222000, X, Y) && !ellipse(27838.493600, 28507.330400, 1029.328030, 1029.328030, 0.000000, X, Y) && !ellipse(28113.509918, 25436.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32203.324000, 28219.838000, 1519.384044, 1519.384044, 0.000000, X, Y) && !ellipse(28929.727880, 27026.611280, 769.020022, 769.020022, 0.000000, X, Y) && !ellipse(29269.680222, 29072.001800, 1212.688035, 1212.688035, 0.000000, X, Y) && !ellipse(27464.858000, 25222.716000, 1178.544034, 1178.544034, 0.000000, X, Y) && !ellipse(28549.585205, 25881.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.766000, 28735.960000, 1192.920034, 1192.920034, 0.000000, X, Y) && !ellipse(28124.186000, 25931.620000, 1217.728035, 1217.728035, 0.000000, X, Y) && !ellipse(27785.580000, 24072.388000, 1187.808034, 1187.808034, 0.000000, X, Y) && !ellipse(26811.864000, 27738.728000, 1127.888032, 1127.888032, 0.000000, X, Y) && !ellipse(29089.596000, 26449.758000, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(29176.568000, 23956.348000, 2110.176061, 2110.176061, 0.000000, X, Y) && !ellipse(30648.582336, 28492.600311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28249.285461, 27525.357208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.355713, 28755.318115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.699066, 26482.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29076.839508, 25179.957428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27153.615936, 26743.259918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29266.682068, 25814.854584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30842.513641, 23804.649597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.688000, 25231.128000, 1134.896033, 1134.896033, 0.000000, X, Y) && !ellipse(31324.178436, 28739.273773, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 08:29:04 2012] Writing fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src95.gif
[Mon Aug 13 08:47:04 2012] Mean detx,y = (-1558.54, -4749.71) 
[Mon Aug 13 08:47:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 08:47:14 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 08:47:14 2012] Setting source spectrum file to fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Mon Aug 13 08:47:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Mon Aug 13 21:54:33 2012] Updating aperture counts using extracted products
[Mon Aug 13 21:54:33 2012] Error reading totcts from fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Mon Aug 13 21:54:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 21:54:40 2012] Using photon index=1.80, rate=0.0072, arf fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src95.arf
[Mon Aug 13 21:54:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 21:54:40 2012] Updating source flux to 9.5e-14
[Mon Aug 13 21:55:11 2012] Flag c found in src. 95 procflags, skipping spectral fitting