[Sat Aug 11 06:41:36 2012] Detection parameters:
  Position = (301.9, 285.1) = 6 17 23.21 22 42 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.6 +/- 29.8
  Background counts = 282.0
  Rate = 0.008 +/- 0.001

[Sat Aug 11 06:41:39 2012] Off-axis axis estimate = 1.00'
[Sat Aug 11 15:49:20 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 15:49:20 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Sat Aug 11 15:49:20 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Sat Aug 11 15:49:20 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 6.93"
[Sat Aug 11 22:00:14 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src65.ximg exists
[Sat Aug 11 22:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src65.csv
[Sat Aug 11 22:00:14 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat Aug 11 22:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src65.csv
[Sat Aug 11 22:00:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 22:00:18 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat Aug 11 22:00:18 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Aug 11 22:00:18 2012] Fit fullrun_mos1_xmm0114100101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sun Aug 12 03:55:02 2012] Source 114 is offset by -3.020041 and -5.555321 pixels which is larger than
2 X fitted extent = 2.917784 x 2.917784, not incorporating fit results
[Sun Aug 12 03:55:03 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 03:55:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 03:55:03 2012] Assessing source extent using major
[Sun Aug 12 03:55:03 2012] Source does appear to be extended
[Sun Aug 12 03:55:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 03:55:03 2012] Source is confused with source 107
[Sun Aug 12 13:02:32 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 13:02:32 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Sun Aug 12 13:02:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Sun Aug 12 13:02:32 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 6.93"
[Sun Aug 12 20:18:54 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src51.ximg exists
[Sun Aug 12 20:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src51.csv
[Sun Aug 12 20:18:54 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Aug 12 20:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src51.csv
[Sun Aug 12 20:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 20:18:56 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Aug 12 20:18:56 2012] fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Aug 12 20:18:56 2012] Fit fullrun_mos1_xmm0114100101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Mon Aug 13 02:00:28 2012] Source 114 is offset by -2.880708 and -5.376470 pixels which is larger than
2 X fitted extent = 2.676952 x 2.676952, not incorporating fit results
[Mon Aug 13 02:00:28 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:00:28 2012] Assessing source extent using major
[Mon Aug 13 02:00:28 2012] Source does appear to be extended
[Mon Aug 13 02:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 08:29:06 2012] XMMSAS src. selection expression = ellipse(26218.100433, 24751.271088, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 08:29:06 2012] Writing source region out to fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src114_src.reg
[Mon Aug 13 08:29:06 2012] Extracting stamp from image fullrun_mos1_xmm0114100101_pi300-10000_cl_sm2.00.img.gz, (264, 248) - (339, 323)
[Mon Aug 13 08:29:06 2012] XMMSAS bgd. selection expression = annulus(26218.100433, 24751.271088, 1087.500000, 2175.000000, X, Y) && !ellipse(25881.726000, 26861.108800, 2538.248073, 1085.264031, 33.222000, X, Y) && !ellipse(21480.326000, 27332.756200, 2758.896079, 2758.896079, 0.000000, X, Y) && !ellipse(28113.509918, 25436.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28929.727880, 27026.611280, 769.020022, 769.020022, 0.000000, X, Y) && !ellipse(27464.858000, 25222.716000, 1178.544034, 1178.544034, 0.000000, X, Y) && !ellipse(28549.585205, 25881.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.955642, 26943.585008, 1486.952043, 1389.002138, 0.000000, X, Y) && !ellipse(28124.186000, 25931.620000, 1217.728035, 1217.728035, 0.000000, X, Y) && !ellipse(27785.580000, 24072.388000, 1187.808034, 1187.808034, 0.000000, X, Y) && !ellipse(26811.864000, 27738.728000, 1127.888032, 1127.888032, 0.000000, X, Y) && !ellipse(25495.630400, 27214.570000, 1153.856033, 1153.856033, 0.000000, X, Y) && !ellipse(29089.596000, 26449.758000, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(25993.811600, 25317.406000, 1061.384031, 1061.384031, 0.000000, X, Y) && !ellipse(26325.273346, 27347.833984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29176.568000, 23956.348000, 2110.176061, 2110.176061, 0.000000, X, Y) && !ellipse(26691.476227, 24582.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28249.285461, 27525.357208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25643.268005, 27774.983063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25891.863708, 25872.710327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.699066, 26482.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29076.839508, 25179.957428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27153.615936, 26743.259918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.081543, 26837.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.900604, 27454.422791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23968.016205, 27545.660217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.790192, 25869.657043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25775.915924, 23982.390533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.846436, 26376.918976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23511.383026, 26511.085571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25226.614258, 24034.973389, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 08:29:06 2012] Writing fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src114.gif
[Mon Aug 13 09:01:16 2012] Mean detx,y = (-237.50, -1622.25) 
[Mon Aug 13 09:01:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 09:01:27 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 09:01:27 2012] Setting source spectrum file to fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src114_src_b10.pi.gz
[Mon Aug 13 09:01:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src114_bgd.pi.gz
[Mon Aug 13 12:32:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 12:32:36 2012] rmf not generated due to insufficient counts
[Mon Aug 13 21:54:35 2012] Updating aperture counts using extracted products
[Mon Aug 13 21:54:35 2012] Error reading totcts from fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src114_src_b10.pi.gz
[Mon Aug 13 21:54:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 21:54:41 2012] Using photon index=1.80, rate=0.00847, arf fullrun_mos1_xmm0114100101_pi300-10000_pass1_cl_src114.arf
[Mon Aug 13 21:54:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 21:54:42 2012] Updating source flux to 8.8e-14
[Mon Aug 13 21:55:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting