[Mon May 27 19:09:48 2013] Detection parameters:
  Position = (315.4, 218.5) = 5 39 52.45 -28 47 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 8.4
  Background counts = 7.9
  Rate = 0.004 +/- 0.0007

[Mon May 27 19:09:49 2013] Off-axis axis estimate = 5.92'
[Mon May 27 19:10:30 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:10:30 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Mon May 27 19:10:30 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.637
[Mon May 27 19:10:30 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.39"
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 27 19:10:31 2013] Fit fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src11 appears to have run properly
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 27 19:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 27 19:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 27 19:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:11:06 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.837082 pixels away
[Mon May 27 19:11:06 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:11:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:11:06 2013] Assessing source extent using major
[Mon May 27 19:11:06 2013] Source does appear to be extended
[Mon May 27 19:11:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:11:25 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:11:25 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Mon May 27 19:11:25 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.637
[Mon May 27 19:11:25 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.39"
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 27 19:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src11.csv
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 27 19:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src11.csv
[Mon May 27 19:11:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 27 19:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 27 19:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 27 19:11:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:12:00 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.598285 pixels away
[Mon May 27 19:12:00 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:12:00 2013] Assessing source extent using major
[Mon May 27 19:12:00 2013] Source does appear to be extended
[Mon May 27 19:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:35:05 2013] XMMSAS src. selection expression = ellipse(27390.396759, 18963.005875, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 19:35:05 2013] Not overwriting source region fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src.reg
[Mon May 27 19:35:05 2013] Extracting stamp from image fullrun_mos2_xmm0114090101_pi300-10000_cl_sm2.00.img.gz, (278, 181) - (353, 256)
[Mon May 27 19:35:05 2013] XMMSAS bgd. selection expression = annulus(27390.396759, 18963.005875, 1087.500000, 2175.000000, X, Y)
[Mon May 27 19:35:05 2013] Writing fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27.gif
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/events/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0114090101/products/events/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Mon May 27 19:35:06 2013] Mean detx,y = (299.70, -8677.86) 
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/images/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src.img and ../../xmm0114090101/products/images/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/spectra/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0114090101/products/spectra/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Mon May 27 19:35:06 2013] Setting source spectrum file to fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 27 19:35:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/lightcurves/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0114090101/products/lightcurves/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon May 27 19:35:14 2013] Not generating rmf since there are only 47 counts
[Mon May 27 19:35:14 2013] rmf not generated due to insufficient counts
[Mon May 27 19:35:14 2013] fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Mon May 27 19:36:37 2013] Updating aperture counts using extracted products
[Mon May 27 19:36:37 2013] Total counts from fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 79.00
[Mon May 27 19:36:37 2013] Total counts from fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 371.00
[Mon May 27 19:36:37 2013] Got source and background scale factors 1063928.000000, 9972538.000000
[Mon May 27 19:36:37 2013] User source parameters:
  Position = (315.4, 218.5) = 5 39 52.45 -28 47 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 39.4 +/- 9.9
  Background aperture counts = 39.6
  Rate = 0.002 +/- 0.0005

[Mon May 27 19:36:37 2013] Updating counts from extracted products
[Mon May 27 19:36:37 2013] Set source signif. to 39.42/6.29 = 6.27
[Mon May 27 19:36:41 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 19:36:41 2013] Using photon index=1.80, rate=0.00203, arf fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27.arf
[Mon May 27 19:36:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 19:36:42 2013] Updating source flux to 3.8e-14
[Mon May 27 19:36:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 19:36:53 2013] xmm0114090101/analysis//spectral/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete