[Mon May 27 19:09:46 2013] Detection parameters:
  Position = (385.4, 193.7) = 5 39 29.28 -28 49 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.4 +/- 19.4
  Background counts = 6.3
  Rate = 0.02 +/- 0.002

[Mon May 27 19:09:49 2013] Off-axis axis estimate = 9.87'
[Mon May 27 19:10:30 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:10:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 19:10:30 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Mon May 27 19:10:30 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.929
[Mon May 27 19:10:30 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.36"
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 27 19:10:31 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src3.csv
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 27 19:10:31 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src3.csv
[Mon May 27 19:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 27 19:10:31 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 27 19:10:31 2013] Fit fullrun_mos2_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 27 19:11:06 2013] Warning, spatial fit 3 centroid is now closest to src. 28
[Mon May 27 19:11:06 2013] Spatial fit model total counts = 279.031000, observed total counts = 275.000000
[Mon May 27 19:11:06 2013] Offset between fit and detection position for source 2 = 0.335592 pixels
[Mon May 27 19:11:06 2013] Warning, changing simple spatial fit ID from 3 to 22
[Mon May 27 19:11:06 2013] 276.365000 total counts/ 117.529000 bgd. counts: snr = 14.651309
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.335592 pixels
  Position = (385.3, 193.4) = 5 39 29.32 -28 49 2.1
  Extent = 6.0 (5.1-7.1)", rotation angle = 0
  Source counts = 158.8 +/- 16.6
  Background counts = 117.5
  Rate = 0.008 +/- 0.0009
[Mon May 27 19:11:06 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:11:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:11:06 2013] Assessing source extent using major axis lower bound
[Mon May 27 19:11:06 2013] Source does appear to be extended
[Mon May 27 19:11:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:11:06 2013] Source is confused with source 28
[Mon May 27 19:11:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 19:11:25 2013] Initial guess for spatial extent in simple fitting = 6.01"
[Mon May 27 19:11:25 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.848
[Mon May 27 19:11:25 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.01"
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 27 19:11:26 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src3.csv
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 27 19:11:26 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src3.csv
[Mon May 27 19:11:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 27 19:11:26 2013] fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 27 19:11:26 2013] Fit fullrun_mos2_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 27 19:12:00 2013] Spatial fit model total counts = 278.376000, observed total counts = 278.000000
[Mon May 27 19:12:00 2013] Offset between fit and detection position for source 2 = 0.147121 pixels
[Mon May 27 19:12:00 2013] 268.287000 total counts/ 103.712000 bgd. counts: snr = 16.160298
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.147121 pixels
  Position = (385.3, 193.5) = 5 39 29.31 -28 49 1.5
  Extent = 5.7 (5.0-6.5)", rotation angle = 0
  Source counts = 164.6 +/- 16.4
  Background counts = 103.7
  Rate = 0.008 +/- 0.0008
[Mon May 27 19:12:00 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:12:00 2013] Assessing source extent using major axis lower bound
[Mon May 27 19:12:00 2013] Source does appear to be extended
[Mon May 27 19:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:35:05 2013] XMMSAS src. selection expression = ellipse(33471.542800, 16788.404400, 341.825410, 341.825410, 0.000000, X, Y)
[Mon May 27 19:35:05 2013] Not overwriting source region fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src.reg
[Mon May 27 19:35:05 2013] Extracting stamp from image fullrun_mos2_xmm0114090101_pi300-10000_cl_sm2.00.img.gz, (366, 174) - (405, 213)
[Mon May 27 19:35:05 2013] XMMSAS bgd. selection expression = annulus(33471.542800, 16788.404400, 569.709016, 1139.418033, X, Y) && !ellipse(33421.688751, 17325.936050, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 19:35:05 2013] Writing fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2.gif
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/events/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0114090101/products/events/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon May 27 19:35:06 2013] Mean detx,y = (-5742.40, -11234.71) 
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/images/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0114090101/products/images/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/spectra/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0114090101/products/spectra/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon May 27 19:35:06 2013] Setting source spectrum file to fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 27 19:35:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 27 19:35:06 2013] ../../xmm0114090101/products/lightcurves/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0114090101/products/lightcurves/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon May 27 19:35:14 2013] fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Mon May 27 19:35:14 2013] fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Mon May 27 19:36:35 2013] Updating aperture counts using extracted products
[Mon May 27 19:36:35 2013] Total counts from fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 185.00
[Mon May 27 19:36:35 2013] Total counts from fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 45.00
[Mon May 27 19:36:35 2013] Got source and background scale factors 368000.000000, 1846400.000000
[Mon May 27 19:36:35 2013] User source parameters:
  Position = (385.3, 193.5) = 5 39 29.31 -28 49 1.5
  Extent = 5.7 (5.0-6.5)", rotation angle = 0
  Source aperture counts = 176.0 +/- 14.6
  Background aperture counts = 9.0
  Rate = 0.009 +/- 0.0008

[Mon May 27 19:36:41 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 19:36:41 2013] Using photon index=1.80, rate=0.00849, arf fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2.arf
[Mon May 27 19:36:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 19:36:41 2013] Updating source flux to 2e-13
[Mon May 27 19:36:51 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon May 27 19:36:53 2013] xmm0114090101/analysis//spectral/fullrun_mos2_xmm0114090101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete