[Mon May 27 19:09:46 2013] Detection parameters:
  Position = (356.6, 141.2) = 5 39 38.79 -28 52 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.4 +/- 9.2
  Background counts = 5.9
  Rate = 0.002 +/- 0.0005

[Mon May 27 19:09:46 2013] Off-axis axis estimate = 12.16'
[Mon May 27 19:10:28 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:10:28 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Mon May 27 19:10:28 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075
[Mon May 27 19:10:28 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.51"
[Mon May 27 19:10:29 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src21.ximg exists
[Mon May 27 19:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src21.csv
[Mon May 27 19:10:29 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon May 27 19:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src21.csv
[Mon May 27 19:10:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:10:30 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon May 27 19:10:30 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon May 27 19:10:30 2013] Fit fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon May 27 19:10:58 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 13.552691 pixels away
[Mon May 27 19:10:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:10:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:10:58 2013] Assessing source extent using major
[Mon May 27 19:10:58 2013] Source does appear to be extended
[Mon May 27 19:10:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:11:24 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:11:24 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Mon May 27 19:11:24 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075
[Mon May 27 19:11:24 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 12.51"
[Mon May 27 19:11:24 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 27 19:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src21.csv
[Mon May 27 19:11:24 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 27 19:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src21.csv
[Mon May 27 19:11:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:11:25 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 27 19:11:25 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 27 19:11:25 2013] Fit fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon May 27 19:11:54 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 13.384383 pixels away
[Mon May 27 19:11:54 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:11:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:11:54 2013] Assessing source extent using major
[Mon May 27 19:11:54 2013] Source does appear to be extended
[Mon May 27 19:11:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:12:46 2013] XMMSAS src. selection expression = ellipse(30978.164398, 12233.927048, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 19:12:46 2013] Not overwriting source region fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29_src.reg
[Mon May 27 19:12:46 2013] Extracting stamp from image fullrun_mos1_xmm0114090101_pi300-10000_cl_sm2.00.img.gz, (319, 104) - (394, 179)
[Mon May 27 19:12:46 2013] XMMSAS bgd. selection expression = annulus(30978.164398, 12233.927048, 1087.500000, 2175.000000, X, Y)
[Mon May 27 19:12:46 2013] Writing fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29.gif
[Mon May 27 19:13:17 2013] Mean detx,y = (-15438.72, 2737.65) 
[Mon May 27 19:13:18 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 19:13:36 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 19:13:36 2013] Setting source spectrum file to fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon May 27 19:13:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon May 27 19:34:18 2013] Not generating rmf since there are only 48 counts
[Mon May 27 19:34:18 2013] rmf not generated due to insufficient counts
[Mon May 27 19:36:31 2013] Updating aperture counts using extracted products
[Mon May 27 19:36:31 2013] Total counts from fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 68.00
[Mon May 27 19:36:31 2013] Total counts from fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 235.00
[Mon May 27 19:36:31 2013] Got source and background scale factors 1331200.000000, 8781584.000000
[Mon May 27 19:36:31 2013] User source parameters:
  Position = (356.6, 141.2) = 5 39 38.79 -28 52 50.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.4 +/- 9.3
  Background aperture counts = 35.6
  Rate = 0.002 +/- 0.0005

[Mon May 27 19:36:31 2013] Updating counts from extracted products
[Mon May 27 19:36:31 2013] Set source signif. to 32.38/5.97 = 5.42
[Mon May 27 19:36:34 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 19:36:34 2013] Using photon index=1.80, rate=0.00167, arf fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29.arf
[Mon May 27 19:36:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 19:36:34 2013] Updating source flux to 4.4e-14
[Mon May 27 19:36:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 19:36:51 2013] xmm0114090101/analysis//spectral/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete