[Mon May 27 19:09:43 2013] Detection parameters:
  Position = (403.5, 286.0) = 5 39 23.33 -28 42 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.0 +/- 21.2
  Background counts = 5.3
  Rate = 0.01 +/- 0.001

[Mon May 27 19:09:46 2013] Off-axis axis estimate = 7.67'
[Mon May 27 19:10:28 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:10:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 19:10:28 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Mon May 27 19:10:28 2013] source mask rpix=2.4, npix_max = 32, mask sum = 21, frac = 0.642
[Mon May 27 19:10:28 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.26"
[Mon May 27 19:10:29 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 27 19:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src2.csv
[Mon May 27 19:10:29 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 27 19:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src2.csv
[Mon May 27 19:10:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:10:30 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 27 19:10:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 27 19:10:30 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 27 19:10:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 27 19:10:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114090101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:10:58 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.767158 pixels away
[Mon May 27 19:10:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:10:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:10:58 2013] Assessing source extent using major
[Mon May 27 19:10:58 2013] Source does appear to be extended
[Mon May 27 19:10:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:11:24 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Mon May 27 19:11:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 19:11:24 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Mon May 27 19:11:24 2013] source mask rpix=2.4, npix_max = 32, mask sum = 21, frac = 0.642
[Mon May 27 19:11:24 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.26"
[Mon May 27 19:11:24 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 27 19:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src2.csv
[Mon May 27 19:11:24 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 27 19:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src2.csv
[Mon May 27 19:11:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:11:25 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 27 19:11:25 2013] fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 27 19:11:25 2013] Fit fullrun_mos1_xmm0114090101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 27 19:11:54 2013] Spatial fit model total counts = 304.754000, observed total counts = 322.000000
[Mon May 27 19:11:54 2013] Offset between fit and detection position for source 1 = 0.950378 pixels
[Mon May 27 19:11:54 2013] 306.650000 total counts/ 104.016000 bgd. counts: snr = 19.868370
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.950378 pixels
  Position = (402.9, 285.3) = 5 39 23.53 -28 42 22.4
  Extent = 7.1 (6.3-8.4)", rotation angle = 0
  Source counts = 202.6 +/- 17.5
  Background counts = 104.0
  Rate = 0.01 +/- 0.0009
[Mon May 27 19:11:54 2013] Vigneting correction estimate = 1.000000
[Mon May 27 19:11:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 19:11:54 2013] Assessing source extent using major axis lower bound
[Mon May 27 19:11:54 2013] Source does appear to be extended
[Mon May 27 19:11:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:12:46 2013] XMMSAS src. selection expression = ellipse(35000.721720, 24768.946400, 428.881212, 428.881212, 0.000000, X, Y)
[Mon May 27 19:12:46 2013] Not overwriting source region fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 27 19:12:46 2013] Extracting stamp from image fullrun_mos1_xmm0114090101_pi300-10000_cl_sm2.00.img.gz, (378, 261) - (428, 310)
[Mon May 27 19:12:46 2013] XMMSAS bgd. selection expression = annulus(35000.721720, 24768.946400, 714.802021, 1429.604041, X, Y)
[Mon May 27 19:12:46 2013] Writing fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1.gif
[Mon May 27 19:12:46 2013] ../../xmm0114090101/products/events/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0114090101/products/events/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon May 27 19:12:46 2013] Mean detx,y = (-3206.01, 7624.19) 
[Mon May 27 19:12:46 2013] ../../xmm0114090101/products/images/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0114090101/products/images/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon May 27 19:12:46 2013] ../../xmm0114090101/products/spectra/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0114090101/products/spectra/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon May 27 19:12:46 2013] Setting source spectrum file to fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 27 19:12:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 27 19:12:46 2013] ../../xmm0114090101/products/lightcurves/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0114090101/products/lightcurves/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon May 27 19:36:27 2013] Updating aperture counts using extracted products
[Mon May 27 19:36:27 2013] Total counts from fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 245.00
[Mon May 27 19:36:27 2013] Total counts from fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 169.00
[Mon May 27 19:36:27 2013] Got source and background scale factors 399192.000000, 3953812.000000
[Mon May 27 19:36:27 2013] User source parameters:
  Position = (402.9, 285.3) = 5 39 23.53 -28 42 22.4
  Extent = 7.1 (6.3-8.4)", rotation angle = 0
  Source aperture counts = 227.9 +/- 16.7
  Background aperture counts = 17.1
  Rate = 0.01 +/- 0.0009

[Mon May 27 19:36:33 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 19:36:33 2013] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1.arf
[Mon May 27 19:36:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 19:36:33 2013] Updating source flux to 1.8e-13
[Mon May 27 19:36:51 2013] xmm0114090101/analysis//spectral/fullrun_mos1_xmm0114090101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete