[Fri Jun 21 18:57:43 2013] Detection parameters:
  Position = (426.0, 471.7) = 7 57 13.40 -60 40 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.4 +/- 13.1
  Background counts = 28.7
  Rate = 0.004 +/- 0.0007

[Fri Jun 21 18:57:47 2013] Off-axis axis estimate = 15.60'
[Fri Jun 21 18:58:27 2013] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:27 2013] Initial guess for spatial extent in simple fitting = 14.23"
[Fri Jun 21 18:58:27 2013] source mask rpix=3.3, npix_max = 56, mask sum = 52, frac = 0.914
[Fri Jun 21 18:58:27 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 14.23"
[Fri Jun 21 18:58:28 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 21 18:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src8.csv
[Fri Jun 21 18:58:28 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 21 18:58:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src8.csv
[Fri Jun 21 18:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 21 18:58:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun 21 18:58:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 21 18:58:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun 21 18:58:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:58 2013] Spatial fit model total counts = 801.245000, observed total counts = 653.000000
[Fri Jun 21 18:58:58 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 18:58:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:58:58 2013] Assessing source extent using major
[Fri Jun 21 18:58:58 2013] Source does appear to be extended
[Fri Jun 21 18:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:31 2013] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 18:59:31 2013] Initial guess for spatial extent in simple fitting = 14.23"
[Fri Jun 21 18:59:31 2013] source mask rpix=3.3, npix_max = 56, mask sum = 52, frac = 0.914
[Fri Jun 21 18:59:31 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 14.23"
[Fri Jun 21 18:59:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 21 18:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src8.csv
[Fri Jun 21 18:59:32 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 21 18:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src8.csv
[Fri Jun 21 18:59:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 21 18:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:54 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.123762 pixels away
[Fri Jun 21 18:59:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:54 2013] Assessing source extent using major
[Fri Jun 21 18:59:54 2013] Source does appear to be extended
[Fri Jun 21 18:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:26 2013] XMMSAS src. selection expression = ellipse(37013.457520, 40992.597717, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:26 2013] Not overwriting source region fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 21 19:00:26 2013] Extracting stamp from image fullrun_pn_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (388, 434) - (463, 509)
[Fri Jun 21 19:00:26 2013] XMMSAS bgd. selection expression = annulus(37013.457520, 40992.597717, 1087.500000, 2175.000000, X, Y) && !ellipse(35348.093400, 42301.449800, 801.912023, 801.912023, 0.000000, X, Y)
[Fri Jun 21 19:00:26 2013] Writing fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9.gif
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:28 2013] Mean detx,y = (8185.39, -14723.98) 
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src.img and ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:28 2013] Setting source spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 21 19:00:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 21 19:00:28 2013] ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Jun 21 19:00:46 2013] Not generating rmf since there are only 86 counts
[Fri Jun 21 19:00:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:00:46 2013] fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Fri Jun 21 19:59:01 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:01 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 212.00
[Fri Jun 21 19:59:02 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_bgd.pi.gz = 929.00
[Fri Jun 21 19:59:02 2013] Got source and background scale factors 1137970.000000, 5739412.000000
[Fri Jun 21 19:59:02 2013] User source parameters:
  Position = (426.0, 471.7) = 7 57 13.40 -60 40 55.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.8 +/- 15.6
  Background aperture counts = 184.2
  Rate = 0.001 +/- 0.0008

[Fri Jun 21 19:59:02 2013] Updating counts from extracted products
[Fri Jun 21 19:59:02 2013] Set source signif. to 27.80/13.57 = 2.05
[Fri Jun 21 19:59:15 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:15 2013] Using photon index=1.80, rate=0.00139, arf fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9.arf
[Fri Jun 21 19:59:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:15 2013] Updating source flux to 1.7e-14
[Fri Jun 21 19:59:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:48 2013] xmm0113891001/analysis//spectral/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete