[Fri Jun 21 18:57:46 2013] Detection parameters:
  Position = (329.4, 319.6) = 7 58 10.48 -60 51 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.4 +/- 19.5
  Background counts = 43.1
  Rate = 0.01 +/- 0.001

[Fri Jun 21 18:57:47 2013] Off-axis axis estimate = 2.72'
[Fri Jun 21 18:58:27 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:58:27 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Jun 21 18:58:27 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.191
[Fri Jun 21 18:58:27 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 7.79"
[Fri Jun 21 18:58:29 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src59.ximg exists
[Fri Jun 21 18:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src59.csv
[Fri Jun 21 18:58:29 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Jun 21 18:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src59.csv
[Fri Jun 21 18:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:35 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Jun 21 18:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri Jun 21 18:58:35 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Jun 21 18:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri Jun 21 18:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:58:58 2013] Spatial fit model total counts = 647.973000, observed total counts = 554.000000
[Fri Jun 21 18:58:58 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 18:58:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:58:58 2013] Assessing source extent using major
[Fri Jun 21 18:58:58 2013] Source does appear to be extended
[Fri Jun 21 18:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:59:31 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:59:31 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Jun 21 18:59:31 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.191
[Fri Jun 21 18:59:31 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 7.79"
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src56.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src56.csv
[Fri Jun 21 18:59:33 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri Jun 21 18:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src56.csv
[Fri Jun 21 18:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:34 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri Jun 21 18:59:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Jun 21 18:59:34 2013] fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri Jun 21 18:59:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Jun 21 18:59:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0113891001_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:59:54 2013] Source 61 is offset by 7.595730 and 5.722530 pixels which is larger than
2 X fitted extent = 0.895209 x 0.895209, not incorporating fit results
[Fri Jun 21 18:59:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:59:54 2013] Assessing source extent using major
[Fri Jun 21 18:59:54 2013] Source does appear to be extended
[Fri Jun 21 18:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:00:27 2013] XMMSAS src. selection expression = ellipse(28612.262482, 27753.294128, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 19:00:27 2013] Not overwriting source region fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src.reg
[Fri Jun 21 19:00:27 2013] Extracting stamp from image fullrun_pn_xmm0113891001_pi300-10000_cl_sm2.00.img.gz, (292, 282) - (367, 357)
[Fri Jun 21 19:00:27 2013] XMMSAS bgd. selection expression = annulus(28612.262482, 27753.294128, 1087.500000, 2175.000000, X, Y) && !ellipse(30168.168060, 27442.868103, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 19:00:27 2013] Writing fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61.gif
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0113891001/products/events/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Fri Jun 21 19:00:34 2013] Mean detx,y = (1403.65, -576.43) 
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src.img and ../../xmm0113891001/products/images/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0113891001/products/spectra/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Fri Jun 21 19:00:34 2013] Setting source spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Jun 21 19:00:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri Jun 21 19:00:34 2013] ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0113891001/products/lightcurves/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Fri Jun 21 19:00:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 19:00:46 2013] rmf not generated due to insufficient counts
[Fri Jun 21 19:00:46 2013] fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Fri Jun 21 19:59:11 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:59:11 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 439.00
[Fri Jun 21 19:59:11 2013] Total counts from fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_bgd.pi.gz = 1867.00
[Fri Jun 21 19:59:11 2013] Got source and background scale factors 1112770.000000, 8534931.000000
[Fri Jun 21 19:59:11 2013] User source parameters:
  Position = (329.4, 319.6) = 7 58 10.48 -60 51 58.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 195.6 +/- 22.0
  Background aperture counts = 243.4
  Rate = 0.01 +/- 0.001

[Fri Jun 21 19:59:11 2013] Updating counts from extracted products
[Fri Jun 21 19:59:11 2013] Set source signif. to 195.58/15.60 = 12.54
[Fri Jun 21 19:59:16 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:59:16 2013] Using photon index=1.80, rate=0.00978, arf fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61.arf
[Fri Jun 21 19:59:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:59:16 2013] Updating source flux to 3.9e-14
[Fri Jun 21 19:59:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 19:59:48 2013] xmm0113891001/analysis//spectral/fullrun_pn_xmm0113891001_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete